Instruction/ maintenance manual of the product 68002-94310 Shindaiwa
Go to page of 14
N o p e r f o r m a n c e g u a r a n t e e w i t h o u t u s i n g g e n u i n e S h i n d a i w a b l a d e s . N o - l o a d r e v o l u t i o n s p e e d : 4 1 8 0 m i n - 1 ( r p m ) U s e r e i n f o r c e d a b r a s i v e b l a d e s w i t h m a x i m u m u s e a b l e p e r i m e t e r v e l o c i t y o f 2 4 8 f t / s e c .
2 Throughout this manual are special “attention statements”. WARNING! A statement preceded by the word “WARNING” contains information that should be acted upon to prevent serious injury. CAUTION! A statement preceded by the word “CAUTION” contains information that should be acted upon to prevent unit damage.
3 Before Operation ■ Children and people who do not understand this manual must not use this unit. ■ Never allow other people or animals to be near the unit when starting or operating. ■ Never touch a rotating cut-off wheel. ■ Operate the unit only in a well ventilated area.
4 Safety Precautions (continued) WARNING! Figure 1. Start the engine at least 10 feet (3 meters) from a fueling location. Starting The Engine ■ Start the engine at least 10 feet (3m) away from a fueling location. ■ When starting the engine, make sure the cut-off wheel does not touch any object or ground.
5 Safety Precautions (continued) WARNING! Kickback ■ Kickback may force the cut-off wheel up and back toward the operator lightning-fast. ■ Kickback can occur whenever the upper half of the cut-off wheel touches an object. Never cut an object using the upper half of the cut-off wheel.
6 Inspection and Maintenance ■ Before performing any inspection, maintenance, repair or cleaning of the unit, make sure engine and cut-off wheel are completely stopped and cooled down. ■ Inspection and maintenance operations should be done in a well ventilated location and where there are no combustibles nearby.
7 Safety and Operation Information Labels EC7500.1 N o p e r f o r m a n c e g u a r a n t e e w i t h o u t u s i n g g e n u i n e S h i n d a i w a b l a d e s N o - l o a d r e v o l u t i o n s p.
8 EC7500.18 EC7500.1A Unit Description Figure 5 Air Cleaner Cover Choke Primer Pump Front Handle Cylinder Cover Throttle Trigger Lockout Carburetor Idle Adjustment Screw Cut-off Wheel Wheel Guard Lock.
9 T echnical Specifications Engine Type ........................... 2-Cycle, vertical-cylinder, air-cooled Displacem ent ....... 4.5 cu. in. (73.5cc)* Bore x Stroke .. 2 x 1.4 in. (51 x 36mm) Max. Power Outpu t ** . . 4. 5 hp (3.3kW) Recommended Engine Idling Speed .
10 EC7500.20A Assembly EC7500.19 Figure 6 Instruction Manual Engine Unit Tool Set Figure 7. Belt Guard Hex Wrench Mounting the Cut-off Wheel 1. Select a cut-off wheel for your work according to the following chart. Refer to the wheel manufacturer’s manual for additional information.
11 EC7500.20 4. Loosen bolt with the wrench and remove bolt and outer flange. See Figure 8. Figure 8 Outer Flange Bolt Tighten Loosen WARNING! ■ When filling the fuel tank, make sure the engine is stopped and cool. ■ Filling the fuel tank or mixing fuel and oil must be done in a place where there is no risk of fire.
12 EC7500.22 7. Grip the recoil starter handle with your right hand, pull the starter cord slowly until you feel the starter engage, then… 8. …start the engine by pulling the starter cord upward rapidly. CAUTION! ■ The recoil starter can be damaged by abuse.
13 EC7500.23 1. Turn the on-off switch On. WARNING! The cut-off wheel must not rotate at idle speed. If it rotates, reduce idle speed by adjusting the idle adjust screw. 2. Push the decompression valve in. 3. Pull the choke all the way out and push it back to the original position (choke open).
14 EC7500.27 WARNING! ■ Never permit bystanders or animals near the unit when starting or operating the unit. ■ Be aware of kickback! Kickback may force the cut-off wheel up and back toward the operator lightning-fast. Kick- back can occur whenever the upper half of the cut-off wheel touches an object.
An important point after buying a device Shindaiwa 68002-94310 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Shindaiwa 68002-94310 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Shindaiwa 68002-94310 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Shindaiwa 68002-94310 you will learn all the available features of the product, as well as information on its operation. The information that you get Shindaiwa 68002-94310 will certainly help you make a decision on the purchase.
If you already are a holder of Shindaiwa 68002-94310, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Shindaiwa 68002-94310.
However, one of the most important roles played by the user manual is to help in solving problems with Shindaiwa 68002-94310. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Shindaiwa 68002-94310 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
