Instruction/ maintenance manual of the product T-4108CS Sherwood
Go to page of 6
.
OPERA TING INSTRUCTIONS HOME THEA TER SPEAKER SY STEM ST -4108 ST -4108F/R ST -4108C ASW -4108.
Introduction 3 UNPACKING AND INSTALLATION READ THIS BEFORE OPERATING YOUR UNIT Congratulations on Your Purchase! Your new speaker-system is designed to deliver maximum enjoyment and years of trouble free service. Please take a few moments to read this manual thoroughly.
Rear Panel Controls 4 ① POWER/VOLUME KNOB ・ Turn this knob to turn the power on, then this unit enters the operating mode. The color of LED turns green. ・ To turn the power off, press this switch again, then the power is cut off and this unit enters the power off mode.
System Connections 5 ・ This ST-4108 is designed to use together with Sherwood ’ s products.(amplifier/DVD receiver/etc) Doing so will allow you to operate easily and conveniently. In case of connecting other amplifier or receiver to this unit, contact your dealer or our service organization.
T roubleshooting Guide 6 Specifications No Power No sound Distorted sound Less bass and poor imaging ・ The AC input cord is disconnected. ・ The POWER switch on the rear panel is not pressed. ・ Incorrect connection between the components. ・ Incorrect operation of the component connected.
An important point after buying a device Sherwood T-4108CS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sherwood T-4108CS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sherwood T-4108CS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sherwood T-4108CS you will learn all the available features of the product, as well as information on its operation. The information that you get Sherwood T-4108CS will certainly help you make a decision on the purchase.
If you already are a holder of Sherwood T-4108CS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sherwood T-4108CS.
However, one of the most important roles played by the user manual is to help in solving problems with Sherwood T-4108CS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sherwood T-4108CS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
