Instruction/ maintenance manual of the product RX-765 Sherwood
Go to page of 18
FM/AM CD TAPE TV/AUX VIDEO TONE DIRECT TUNING/PRESET T/P MODE MEMORY BALANCE TONE REMOTE SENSOR ST TUNED PRESET SLEEP MEM KHz MHz AM/FM STEREO RECEIVER RX -765 ON/STANDBY PHONES VOLUME SPEAKER AB STAN.
2 1. Read Instructions - All the safety and operating instructions should be read before the product is operated. 2. Retain instructions - The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the product and in the operating instructions should be adhered to.
3 Introduction Congratulations on Your Purchase! Your new high fidelity receiver is designed to deliver maximum enjoyment and years of trouble free service. Please take a few moments to read this manual thoroughly. It will explain the features and operation of your unit and help ensure a trouble free installation.
FOR U.S.A AND CANADA .................................. 120 V Units shipped to the U.S.A and Canada are designed for operation on 120 V AC only. Safety precaution with use of a polarized AC plug. However, some products may be supplied with a nonpolarized plug.
5 CONTENTS SAFETY INSTRUCTIONS ......................................................................................................................... 2 Introduction UNPACKING AND INSTALLATION ........................................................
6 System Connections ANTENNA AM LOOP FM 75 AC INPUT 120V~60Hz 2.5A TV/AUX CD VIDEO T APE AM LOOP FM 75 ■ CONNECTING ANTENNAS FM FM (INDOOR ANTENNA) (OUTDOOR ANTENNA) CD player POWER REMOTE SENSOR PR.
7 ANTENNA AM LOOP FM 75 AC INPUT 120V~60Hz 2.5A TV/AUX CD VIDEO T APE AVIS : RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR. WARNING : SHOCK HAZARD-DO NOT OPEN.
8 Front Panel & Remote Controls AM/FM STEREO RECEIVER RX - 765 STANDBY PHONES VOLUME SPEAKER AB DISCRETE AMPLIFIER STAGE DA S FM/AM CD TAPE TV/AUX VIDEO TONE DIRECT T / P MODE MEMORY BALANCE TONE .
9 POWER BUTTON In the standby mode, press this button, then this unit is turned on to enter the operating mode. STANDBY BUTTON In the operating mode, press this button or the POWER button on the front panel, then this unit is turned off to enter the standby mode.
10 FM/AM CD TAPE TV/AUX VIDEO TONE DIRECT MEMORY T/P MODE REMOTE SENSOR TONE BALANCE TUNING/PRESET STANDBY ON/STANDBY PHONES VOLUME SPEAKER AB AM/FM STEREO RECEIVER RX - 765 DISCRETE AMPLIFIER STAGE DAS ST TUNED PRESET SLEEP ms MEM dB KHz MHz POWER ON POWER ON STANDBY STANDBY SPEAKER SPEAKER CD CD A B A B TREBLE TREBLE MUTE MUTE T/P T/P VOL.
11 LISTENING T O A PROGRAM SOURCE Operations Operate the selected component for playback. 4 Adjust the volume to a comfortable listening level. 5 Then the corresponding speaker indication(“SPK A(or/and) B” is displayed and the sound can be heard from the speakers connected to the selected speaker terminals.
12 “TON DIR” is displayed and the sound that bypasses the tone circuitry will be heard. To cancel the tone direct function, press this button again to display “TON CTRL”.
13 LISTENING T O RADIO BROADCASTS Presetting radio stations Auto tuning • Each time this button is pressed, the mode changes as follows: Tuning mode : “PRESET” goes off. Preset mode : “PRESET” lights up. • The tuner will now search until a station of sufficient strength has been found.
14 Repeat the above steps 1 to 3 to memorize other stations. 4 After selecting the tuner as an input source, select the preset mode. 1 Listening to FM stereo broadcasts • When using the NUMERIC buttons on the remote control. Examples) For “3” : For “15” : For “30” : • The station has now been stored in the memory.
Operating the sleep timer The sleep timer allows the system to continue to operate for a specified period of time before automatically shutting off. To set the receiver to automatically turn off after the specified period of time.
16 T roubleshooting Guide PROBLEM POSSIBLE CAUSE REMEDY If a fault occurs, run through the table below before taking your receiver for repair. If the fault persists, attempt to solve it by switching the receiver off and on again. If this fails to resolve the situation, consult with your dealer.
17 AMPLIFIER SECTION Power output, stereo mode, 8 Ω , THD 0.08 %, 20 Hz~20 kHz ................................................................................ 2 X 100 W Total harmonic distortion, 8 Ω , 100 W, 20 Hz~20 kHz ........................
RX-765 AM/FM STEREO RECEIVER OPERATINGINSTRUCTIONS 5707-04740-002-0.
An important point after buying a device Sherwood RX-765 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sherwood RX-765 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sherwood RX-765 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sherwood RX-765 you will learn all the available features of the product, as well as information on its operation. The information that you get Sherwood RX-765 will certainly help you make a decision on the purchase.
If you already are a holder of Sherwood RX-765, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sherwood RX-765.
However, one of the most important roles played by the user manual is to help in solving problems with Sherwood RX-765. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sherwood RX-765 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
