Instruction/ maintenance manual of the product RX-4100 Sherwood
Go to page of 17
VOLUME STANDBY ON/STANDBY AM/FM STEREO RECEIVER RX - 4100 PHONES SPEAKER AB FM/AM CD TAPE TV/AUX VCR TONE DIRECT TUNING/PRESET T/P MODE MEMORY BALANCE TONE REMOTE SENSOR DISCRETE AMPLIFIER STAGE DA S .
2 Introduction Congratulations on Your Purchase! Your new high fidelity receiver is designed to deliver maximum enjoyment and years of trouble free service. Please take a few moments to read this manual thoroughly. It will explain the features and operation of your unit and help ensure a trouble free installation.
FOR U.S.A. AND CANADA ................................. 120 V Units shipped to the U.S.A. and Canada are designed for operation on 120 V AC only. Safety precaution with use of a polarized AC plug. However, some products may be supplied with a nonpolarized plug.
4 CONTENTS Introduction UNPACKING AND INSTALLATION ..................................................................................................... .. 2 READ THIS BEFORE OPERATING YOUR UNIT ........................................................
5 System Connections ANTENNA IN OUT IN OUT MODEL NO. RX - 4100 STEREO RECEIVER MADE IN CHINA DESIGNED IN USA SPEAKERS AC INPUT 120V~60Hz 2.5A SER. NO TV/AUX CD VCR TAPE This device complies with Part 15 of the FCC Rules.
6 ANTENNA IN OUT IN OUT MODEL NO. RX - 4100 STEREO RECEIVER MADE IN CHINA DESIGNED IN USA SPEAKERS AC INPUT 120V~60Hz 2.5A SER. NO TV/AUX CD VCR TAPE This device complies with Part 15 of the FCC Rules.
7 Front Panel & Remote Controls VOLUME STANDBY ON/STANDBY AM/FM STEREO RECEIVER RX - 4100 PHONES SPEAKER AB FM/AM CD TAPE TV/AUX VCR TONE DIRECT TUNING/PRESET T/P MODE MEMORY BALANCE TONE REMOTE SENSOR DISCRETE AMPLIFIER STAGE DA S ENGLISH POWER A SPEAKER B 123 4 567 8 90 FM MODE MEMORY DISPLAY SLEEP P.
ENGLISH 8 POWER BUTTON Press this button to turn the power on, then the STANDBY indicator goes off. Press again this button to turn the power off, then the STANDBY indicator lights up. STANDBY INDICATOR HEADPHONE JACK Stereo headphones with a standard 1/4 inch plug can be plugged into this jack for private listening.
ENGLISH 9 7m 30 30 VOLUME STANDBY ON/STANDBY AM/FM STEREO RECEIVER RX - 4100 PHONES SPEAKER AB FM/AM CD TAPE TV/AUX VCR TONE DIRECT TUNING/PRESET TUNING/PRESET T/P MODE MEMORY BALANCE TONE REMOTE SENSOR DISCRETE AMPLIFIER STAGE DAS POWER A SPEAKER B 1234 5678 90 FM MODE MEMORY DISPLAY SLEEP P.
ENGLISH 10 LISTENING TO A PROGRAM Operations Operate the selected component for playback. 4 Adjust the volume to a comfortable listening level. 5 The unit is turned on and enters the operating mode. To turn the power off, press the POWER button. Then it enters the standby mode and the STANDBY indicator lights up.
ENGLISH 11 “T-DIR” is displayed and the sound that bypasses the tone circuitry will be heard. To cancel the tone direct function, press this button again to display “D-OFF”.
ENGLISH 12 LISTENING TO RADIO Presetting radio stations Auto tuning Each time this button is pressed, the mode changes as follows: Tuning mode : “CH” goes off. Preset mode : “CH” lights up. Then “AUTO” appears on the display. The tuner will now search until a station of sufficient strength has been found.
ENGLISH 13 Repeat the above steps 1 to 3 to memorize other stations. 4 After selecting the tuner as an input source, select the preset mode. 1 Listening to FM stereo broadcasts When using the NUMERIC buttons on the remote control. Examples) For “3” : For “15” : For “30” : The station has now been stored in the memory.
ENGLISH Operating the sleep timer The sleep timer allows the receiver to continue to operate for a specified period of time before automatically shutting off.
15 T roubleshooting Guide PROBLEM POSSIBLE CAUSE REMEDY If a fault occurs, run through the table below before taking your receiver for repair. If the fault persists, attempt to solve it by switching the receiver off and on again. If this fails to resolve the situation, consult your dealer.
16 AMPLIFIER SECTION Power output, stereo mode, 8 Ω , THD 0.9 %, 50 Hz~20 kHz ................................................................................. 2 105 W Total harmonic distortion, 8 Ω , 105 W, 1 kHz .................................
RX-4100 AM/FM STEREO RECEIVER OPERATINGINSTRUCTIONS 5707-21054-003-0.
An important point after buying a device Sherwood RX-4100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sherwood RX-4100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sherwood RX-4100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sherwood RX-4100 you will learn all the available features of the product, as well as information on its operation. The information that you get Sherwood RX-4100 will certainly help you make a decision on the purchase.
If you already are a holder of Sherwood RX-4100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sherwood RX-4100.
However, one of the most important roles played by the user manual is to help in solving problems with Sherwood RX-4100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sherwood RX-4100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
