Instruction/ maintenance manual of the product RD-6513 Sherwood
Go to page of 44
A UDIO/VIDEO RECEIVER OPERA TING INSTRUCTIONS RD-6513 cover 2008.8.21 12:21 PM 페이지 2.
ENGLISH 3 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
ENGLISH 4 Introduction : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
ENGLISH 5 CONTENTS • IMPORTANT SAFETY INSTRUCTIONS ............................................................................................... ............................... 3 Introduction • READ THIS BEFORE OPERATING YOUR UNIT ..............
ENGLISH 6 System Connections • Do not plug the AC input cord into the wall AC outlet until all connections are completed. • Be sure to observe the color coding when connecting audio, video and speaker cords. • Make connections firmly and correctly.
ENGLISH 7 2 . CONNECTING VIDEO COMPONENTS • The jacks of VIDEO 1 may also be connected to a DVD recorder or other digital video recording component. For details, refer to the operating instructions of the component to be connected.
ENGLISH 8 4 . CONNECTING EXTERNAL INs • Use these jacks to connect the corresponding analog outputs of 6 CH decoder or DVD player with 6 CH output for Dolby Digital or DTS, etc. (For details, see the operator's manual of the component to be connected.
ENGLISH 9 6. CONNECTING SUBWOOFER PRE OUT • To emphasize the deep bass sounds, connect a powered subwoofer. 7. CONNECTING SPEAKERS • Be sure to connect speakers firmly and correctly according to the channel(left and right) and the polarity(+ and -).
ENGLISH 10 Ideal speaker placement varies depending on the size of your room and the wall coverings, etc. The typical example of speaker placement and recommendations are as follows : Front left and right speakers and center speaker • Place the front speakers with their front surfaces as flush with TV or monitor screen as possible.
ENGLISH 11 Front Panel Controls FLUORESCENT DISPLAY 1. Input, frequency, volume level, operating information, etc. 2. Surround mode indicators 3. AUTO indicator 4. DIGITAL INPUT indicator 5. DIRECT indicator 6. Preset number, sleep time display 7.
ENGLISH 12 • The FRONT AUX IN jack can be connected to additional audio components such as an MP3 player, etc. Note : • When connecting this jack to an MP3 player, etc.
ENGLISH 13 Remote Controls Note : • Some buttons (USB, VIDEO 3, AUX and USB transport buttons) are not available for this receiver. RD-6513(A) 2008.
ENGLISH 14 LO ADING B A TTERIES REMO TE CONTROL OPERA TION RANGE • Use the remote control unit within a range of about 7 meters (23 feet) and angles of up to 30 degrees aiming at the remote sensor. • Remove the batteries when they are not used for a long time.
ENGLISH 15 Operations LISTENING T O A PROGRAM SOUR CE Before operation • Enter the standby mode. • The STANDBY indicator lights up. This means that the receiver is not disconnected from the AC mains and a small amount of current is retained to support the operation readiness.
ENGLISH 16 When CD, VIDEO 1~ 2 is selected as an input source • When playing back the program sources with surround sound, refer to “ENJOYING SURROUND SOUND” on page 19.
ENGLISH 17 • Each time these buttons are pressed, the tone mode is selected as follows : OFF : To listen to a program source without the tone effect. ("DIR" indicator lights up.) ON : To adjust the tone for your taste. ("DIR" indicator goes off.
ENGLISH 18 SURROUND SOUND • This receiver incorporates a sophisticated Digital Signal Processor that allows you to create optimum sound quality and sound atmosphere in your personal Home Theater. DTS Digital Surround DTS Digital Surround(also called simply DTS) is a multi- channel digital signal format which can handle higher data rates.
ENGLISH 19 ENJO YING SURROUND SOUND Notes : • Before surround playback, first perform the speaker setup procedure, etc. on the SETUP menu for optimum performance. (For details, refer to "SETTING THE SPEAKER SETUP" on page 34.) • When the EXTERNAL IN is selected as an input source, the surround modes cannot be selected.
ENGLISH 20 • While playing digital signals from Dolby Digital or DTS program source or listening in Dolby Pro Logic II Music mode, you can adjust their parameters for optimum surround effect. • Then "DRC : ~ " (or "PANO : ~ ") is displayed for several seconds.
ENGLISH 21 • The volume level of each channel can be adjusted easily with the test tone function. Note : When the SPEAKER button is set to off, the test tone function does not work.
ENGLISH 22 Adjusting the current channel level • Each time these buttons are pressed, the corresponding channel is selected as follows: REF 1, 2 (or CAL) FL C FR <DTS or D.
ENGLISH 23 Memorizing the adjusted channel levels • Then "1" of "REF 1" indication flickers for several seconds. • You can memorize the adjusted channel levels into preset memory("REF 1", "REF 2") and recall the memorized whenever you want.
ENGLISH 24 LISTENING T O RADIO BRO ADCASTS Auto tuning • Each time this button is pressed, the band changes as follows ; FM ST FM MONO AM ("ST" lights up) ("ST" goes .
ENGLISH 25 • When using the NUMERIC buttons on the remote control. Examples) For “3” : For “15” : For “30” : Tuning to preset stations 3. Select the desired preset number (1~30) and press the (MEMORY/)ENTER button. 4. Repeat the above steps1 to 3 to memorize other stations.
ENGLISH 26 RECORDING Recording with TAPE Dubbing from video components onto VIDEO 1 • The analog signals from the EXTERNAL INs as well as the digital signals from the coaxial or optical digital input can be heard but cannot be recorded. • When recording the analog signals from CD, VIDEO 1 ~ 2, be sure to select th analog input.
ENGLISH 27 Dubbing the audio and video signals separately onto VIDEO 1 Example) When dubbing the VIDEO 2 video signal and the CD audio signal separately onto VIDEO 1. 1. Select VIDEO 2 as a video recording source. 2. Select CD as an audio recording source.
ENGLISH 28 Operating the sleep timer • The sleep timer allows the system to continue to operate for a specified period of time before automatically shutting off.
ENGLISH 29 System Setup • The setup menu is displayed on the fluorescent display and allows you to perform the setup procedures easily. In most situations, you will only need to set this once during the installation and layout of your home theater, and it rarely needs to be changed later.
ENGLISH 30 Setup menu flow • The setup menu flow is as follows : • When "RETURN" is selected on a sub-menu, it will return to the previous menu. Note : • During setup menu operation, only the (POWER ON/) STANDBY button and the buttons required for system setup will function.
ENGLISH 31 SETTING THE SY STEM When selecting the SUBWOOFER mode 1. Press CURSOR UP( )/DOWN( ) buttons to select the desired item. 2. Press the CURSOR LEFT( )/RIGHT( ) buttons to set the selected item as desired.
ENGLISH 32 OFF : To listen to a program source without the tone effect. ("DIR" indicator lights up.) ON : To adjust the tone for your taste. ("DIR" indicator goes off.) Note : • When the EXTERNAL IN is selected as an input source, the TONE cannot be set to ON.
ENGLISH 33 3. Press the CURSOR LEFT( )/RIGHT( ) buttons to set the selected item as desired. 2. Press the CURSOR UP( )/DOWN( ) buttons to select the desired item. 1. Press the CURSOR UP( )/DOWN( ) buttons to select the desired input source, then press the ENTER button.
ENGLISH 34 SETTING THE SPEAKER SETUP • After you have installed this receiver and connected all the components, you should adjust the speaker settings for the optimum sound acoustics according to your environment and speaker layout.
ENGLISH 35 When selecting the AUTO SETUP • Auto Setup lets you avoid troublesome listening-based speaker setup and achieve good surround sound. You should connect the supplied microphone to the SETU.
ENGLISH 36 • Depending on your speaker type, you can select one of these following speaker types. L(Large): Select this when connecting speakers that can fully reproduce sounds below crossover frequency. S(Small) : Select this when connecting speakers that can not fully reproduce sounds below crossover frequency.
ENGLISH 37 • You can set the distance within the range of 1 ~ 30 feet in 1 feet intervals. When selecting the DISTANCE Note : • You cannot select the speakers set to "N (None)" and the subwoofer. 1. Press the CURSOR UP( )/DOWN( ) buttons to select the DISTANCE, then press the ENTER button.
ENGLISH 38 About the crossover frequency • When speakers are set to "S (Small)", low frequencies in those channels that are below the crossover frequency are to output from subwoofer or front speakers which are set to "L (Large)" (when not using a subwoofer).
ENGLISH 39 SETTING THE CH LEVEL Note : Depending on the speaker settings ("N (None or No)"), some channels cannot be selected. • The LFE level can be adjusted within the range of -10 ~ 0 dB and other channel levels within the range of -15 ~ +15 dB • In general, we recommend the LFE level to be adjusted to 0 dB.
ENGLISH 40 Memorizing the adjusted channel levels • You can memorize the adjusted channel levels into preset memory("REF 1", "REF 2") and recall the memorized whenever you want. • Then "1" of "REF 1" indication flickers.
ENGLISH 41 SETTING THE P ARAMETER When selecting the NIGHT MODE • This function compresses the dynamic range of previously specified parts of Dolby Digital or DTS sound track (with extremely high volume) to minimize the difference in volume between the specified and non-specified parts.
ENGLISH 42 When selecting the DOLBY PLII MUSIC • You can adjust the various surround parameters for optimum surround effect. Note: The parameter settings are valid only when listening in Dolby Pro Logic II Music mode.
ENGLISH 43 T roubleshooting Guide PROBLEM POSSIBLE CAUSE REMEDY No power No sound No sound from the surround speakers No sound from the center speaker Stations cannot be received Preset stations cannot be received Poor FM reception Continuous hissing noise during FM reception, especially when a stereo broadcast is received.
ENGLISH 44 Specifications AMPLIFIER SECTION • Power output, stereo mode, 6 Ω , THD 0.7%, 40 Hz~20 kHz ..................................................................................... 2 100 W • Total harmonic distortion, 6 Ω , 100 W, 1 kHz .
A UDIO/VIDEO RECEIVER RD-6513 5707-00000-118-0S cover 2008.8.21 12:21 PM 페이지 1.
An important point after buying a device Sherwood RD-6513 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sherwood RD-6513 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sherwood RD-6513 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sherwood RD-6513 you will learn all the available features of the product, as well as information on its operation. The information that you get Sherwood RD-6513 will certainly help you make a decision on the purchase.
If you already are a holder of Sherwood RD-6513, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sherwood RD-6513.
However, one of the most important roles played by the user manual is to help in solving problems with Sherwood RD-6513. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sherwood RD-6513 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
