Instruction/ maintenance manual of the product XL-UH12H Sharp
Go to page of 16
Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. ● XL-UH12H Micro Component System consisting of XL-UH12H (main unit) and CP-UH12H (speaker system).
E-1 WARNINGS: ● When the ON/STAND-BY but ton i s set at STAND-BY pos i t i on, ma i ns voltage i s st i ll present i ns i de the un i t . When the ON/STAND-BY but ton i s set at STAND-BY pos i t i on, the un i t may be brought i nto operat i on by remote control .
E-2 ● Use the un i t on a f i rm, level sur face free from v i brat i on . ● Keep the un i t away f rom d i rect sunl i ght, strong magnet i c f i elds, excess i ve dust, hum i d i ty and electron i c/elect r i cal equ i pment (home computers, facs i m i les, etc .
E-3 After chec k i ng all the connect i ons hav e been made correctly , plug the AC po wer lead of th i s un i t i nto the wall so cket . If you plu g i n the un i t f i rst, the un i t w i ll enter the stand-by mod e . Note: Unplug the A C power lead from the wall soc ket i f the un i t w i ll not be i n use f or a prolonged per i od of t i me .
E-4 Press and hold down (X-B ASS)/EQ button, the un i t w i ll enter the e xtra bass mode wh i ch emphas i ses the bass frequenc i es and “X-BASS” i nd i ca tor w i ll l i ght up . T o cancel the e xtra bass mode , press and hold do wn (X-BASS)/E Q butt on aga i n .
E-5 By us i ng the D i rect Sea rch button s, the des i red trac ks on the current d i sc can b e pla yed . Use the Direct Search buttons on the remote control to select the desired track whilst playing the sele cted disc. ● The D i rect Search butto ns allow you to select up to number 9 .
E-6 Note: If the trac k i s sk i pped dur i ng playbac k, i t means “Cop yr i ght protected WMA f i le” or “Not supported playbac k f i le” i s selected . T o pla y back CD-R/R W . Y ou can choose up to 32 select i ons f or playbac k i n the order you l i ke .
E-7 Y ou can choose up to 32 select i ons f or playbac k i n the order you l i ke . Notes: ● When a d i sc i s ejected, the programme i s aut omat i cally cancelled . ● If you press the ON/STAND-BY button to enter the stand-by mode or change the funct i on fr om CD to another, the programmed select i on s w i ll be cleared .
E-8 Notes: ● SHARP w i ll not be held l i a ble for the loss of data wh i lst the USB memory dev i ce i s connected to the aud i o system . ● F i les compressed i n MP3 and /or WMA format can be played back when connected to the USB term i nal . ● Th i s USB memory’s format supports FAT 16 or FAT 32 .
E-9 To receive an FM stereo transmission: ● Press the FUNCTION button to select FM ST (FM STEREO) mode and “ST” i nd i cato r w i ll be d i splayed . “” w i ll appear when an FM broadcast i s i n stereo . ● If the FM recept i on i s weak, press the FUNCTION button to ext i ng u i sh the “ST” i nd i cator .
E-10 To stop the ASPM operation before it is complete: Press the RDS (ASPM) b utton wh i lst i t i s scann i ng f or stat i ons . The stat i ons wh i ch are already stored i n memo r y w i ll be kept there . Notes: ● Any stat i on wh i ch has th e same frequency as t he one stored i n memory w i ll not be stored .
E-11 In th i s example , the clock i s set f or the 24-hour (00 : 00) d i spla y . To confirm the time display: [When the un i t i s i n the stand-b y mode] Press the (TIMER)/CLOCK b utton . The t i me d i spla y w i ll appear f or about 5 seconds . [When the po wer i s on] Press the (TIMER)/CLOCK b utton .
E-12 Cancelling the timer setting: Press and hold down the (TIMER)/CLO CK button unt i l “ONCE” or “D AIL Y” appears then press MEMOR Y button . The un i t d i spla y shows “OFF” . The rad i o , compact d i sc, USB and AUDI O IN can all be turned off automat i cally .
E-13 The connect i on lead i s not i nclu ded . Purchase a commerc i ally av a i lable lead as shown belo w . Note: T o pre vent no i se i n terf erence, place t he un i t aw ay from the telev i s i on . ● Do not turn the volume on to full at sw i tch on and l i sten to mus i c at moder ate levels .
E-14 Sudden temperat ure changes, stora ge or operat i on i n an ex tremely hum i d env i ronme nt may cause conde nsat i on i ns i de the cab i net (CD p i c kup, etc . ) or on th e transm i tter on the remote contr ol . C onden sat i on can cause the un i t t o malfunct i on .
E-15 As part of our pol i cy of cont i nuous i mprov ement, SHARP reserves the r i ght to mak e des i gn and spec i f i cat i on changes f or product i mpro vement w i thout pr i or not i ce . The perf ormance spec i f i cat i on f i gures i nd i cated are nom i nal value s of product i on un i ts .
An important point after buying a device Sharp XL-UH12H (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sharp XL-UH12H yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sharp XL-UH12H - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sharp XL-UH12H you will learn all the available features of the product, as well as information on its operation. The information that you get Sharp XL-UH12H will certainly help you make a decision on the purchase.
If you already are a holder of Sharp XL-UH12H, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sharp XL-UH12H.
However, one of the most important roles played by the user manual is to help in solving problems with Sharp XL-UH12H. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sharp XL-UH12H along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
