Instruction/ maintenance manual of the product XL-HF301PH(S) Sharp
Go to page of 22
E-1 ● XL-HF201PH(S) Hi Fi Component Syst em consisting of XL-HF201PH(S) ( main unit) and CP-HF200H (spe aker system). ● XL-HF201PH(BK) Hi Fi Component System con sisting of XL-HF201PH(BK) (main u nit) and CP-HF200H (speak er system).
E-2 Precautions ● Use the unit on a firm, le vel surface free from vibrati on. ● Place the speak ers at least 30 cm (12") awa y from any CRT TV t o av oid colour variations across the TV screen. If the v ariations persist, move the speakers further awa y from the TV .
E-3 Controls and indicators (contin ued) Page 1. Re mote Control T rans mitter . . . . . . . . . . . . . . . . . 5 2. O n/Stand-by Button . . . . . . . . . . . . . . . . . 6, 8, 9, 18 3. Num eric Button s . . . . . . . . . . . . . . . . . . . . . . . .
E-4 System connections Supplied FM aerial: Connect the FM aerial wire to t he FM 75 OHMS sock et and position the FM aerial wire in the directi on where the strongest signal can be receiv ed. External FM aerial: Use an e xter nal FM aerial (75 ohms coaxial cable) f or better reception.
E-5 System connections (continued) Y ou can connect a subwoo fer with an amplifier to the SUBWOOFER PRE OUT soc ket. Notes: ● No sound i s heard f rom the subw oof er without a built -in amplifier. ● Subwoofer Pre-out (audio signal): 200mV / 10k ohms at 70 Hz.
E-6 General control Press the ON/ST AND-BY b utton to turn the power on. T o dim the disp lay brightness, press th e DEMO/DIMM ER button on the remote control. If you turn off and on the ma in unit wit h the v olume set to 27 or higher , the volu me starts at 16 and fades in to the last set lev el.
E-7 Setting the clock (Remot e control only) (continued) T o confirm the time displa y: Press the CLOCK/TIMER button. The time display will appear f or about 5 seconds. Note: When power supp ly is restored aft er unit is plug ged in again or after a power failure, reset the cl ock (pages 6-7).
E-8 Listening to the iPod, iPhone or iPad (continued) Note: Docking statio n is not recommended f or iPad connection. Adaptor for iPod and iPhone connecti on Notes: ● Please use the adaptor supplied with y our iPod or iPh one unit. ● Y ou can use an au dio cable to conn ect your iPod to the A UD IO IN sock et if: 1.
E-9 Listening to the iPod, iPhone or iPad (continued) Note: When navigating the iPod, iPhone or iPad menu with remote control, do not operate any of the buttons on the iP od or iPho ne unit. The volume lev el is adju sted by pressing the V OL (+ or –) button on the main unit or the remote contro l.
E-10 Listening to a CD or MP3/WMA disc (continued) Caution: ● Do not place two di scs in one disc tray. ● Do not play discs of speci al shapes (heart, octagon , etc). It may cause malfunctions. ● Do not push the d isc tray whilst it is moving. ● If the power fai ls whilst the tray is open, wait until the power is restored.
E-11 Advanced CD or MP3/WMA disc playback (continued) The tra cks o n the disc can be pla yed in ran dom order automatically . To random play all tracks: Press RANDOM butto n on the remote control until “Random” appears . Press the / (CD/USB / ) button.
E-12 MP3/WMA folder mod e (only for MP3/WMA files) To play back MP3/WMA (Windows Media Audio) file There are many m usic sites on the internet that yo u can download MP3/WMA (Win dows Media A udio) music files. Fol low the instructions f rom the website on how to download the music fil es.
E-13 Listening to USB ma ss storage device /MP3 player Note: This product is not compatib le with MTP and AAC file systems from USB mass stor age device or MP 3 pla yer .
E-14 Advanced USB playback The following functions are the same as CD operations: Pag e Direct tr ack search . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Random play .
E-15 Listening to the radio (continu e d) Y ou can store 40 FM stations in memory and recall them at the push of a button. (Preset tuni ng) Note: The backup function protects t he memorised stations f or a fe w hours should there be a power f ailure or the A C power lead become disconnect ed.
E-16 Using the Radio Da ta System (RDS) (continued) Whilst in the ASP M operation mod e, the t uner will automatically search f or new RDS stations . Up to 40 stations can be stored. If yo u hav e already stored some st ations in memor y , the number of ne w stations you can stor e will be less.
E-17 Using the Radio Da ta System (RDS) (continued) Descriptions of the PTY (Programme Type) codes, TP (Traffic Programme) and TA (Traffic Announcement) Y ou can search for and receiv e the follo w ing PTY , TP and T A signals. NEWS Short accounts of f acts, e vents and publi cly e xpressed vie ws, repor tage and actuality .
E-18 Timer and sleep operation (Remote control only) Timer playback: The unit turns on and pla ys the desired source (CD , TUNER, USB, iP od, A UDIO IN, LINE IN) at a preset time. This unit has 2 types of timer: ONCE TIMER and DAILY TIMER. Once timer: Once timer pla y works for one ti me only at a preset time.
E-19 Timer and sleep operation (Remote control only) ( continued) Notes: ● When performing ti mer playback using anot her unit connected to the USB t erminal or AUDIO IN ja ck, select “USB” or “AUD IO IN” or “LINE IN” in step 5. ● This unit will turn on or enter the power stan d-by mode automatically.
E-20 Enhancing your system The connection lead is no t includ ed. Purchase a commercially av ailable lead as sho wn below . Note: T o prevent noise interference , place the unit awa y from the television. ● Do not turn the volume on to full at swit ch on and listen to music at moderate levels .
E-21 Troubleshooting c hart (continued) Sudden temper ature changes, stor age or oper ation in an extr emely humid en vironment may cause condensation inside the cabinet (CD pic kup , etc.) or on the transmitter on the remote control. Con densation can cause the unit to malfunction.
E-22 Specificati ons As part of our policy of continuous improv ement, SHARP reserves the right to make design an d specification changes f or product improv ement without prior notice. The perf or mance specification figures indi cated are nominal values of pro duction units.
An important point after buying a device Sharp XL-HF301PH(S) (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sharp XL-HF301PH(S) yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sharp XL-HF301PH(S) - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sharp XL-HF301PH(S) you will learn all the available features of the product, as well as information on its operation. The information that you get Sharp XL-HF301PH(S) will certainly help you make a decision on the purchase.
If you already are a holder of Sharp XL-HF301PH(S), but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sharp XL-HF301PH(S).
However, one of the most important roles played by the user manual is to help in solving problems with Sharp XL-HF301PH(S). Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sharp XL-HF301PH(S) along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
