Instruction/ maintenance manual of the product XL-HF200P(BK) Sharp
Go to page of 16
R R M C G A 2 3 2 A W S A iPhone ® adaptor x 2 (GCO V AA238A WSA - No 12) (GCO V AA239A WSA - No 15) Remote control x 1 (RRMCGA244A WSA) AM loop antenna x 1 (QANTL005A WZZ) FM antenna x 1 (F ANT1535A.
E-1 SPECIAL NO TES CA UTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMO VE COVER (OR B ACK). NO USER-SER VICEABLE P ARTS INSIDE. REFER SER VICING TO QU ALIFIED SERVICE PERSONNEL.
E-2 IMPORT ANT SAFETY INSTR UCTIONS (continued) 11) Only use attachments/accessor ies specifi ed by the manuf acturer . 12) Use only with the car t, stand, tr ipod, brack et, or table specifi ed by the manuf acturer , or sold with the apparatus.
E-3 For U .S. customer only CONSUMER LIMITED WARRANTY SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the "Product"), when ship in its o.
E-4 System connections (continued) Speaker connection Connect the blac k wire to the minus (–) terminal, and the red wire to the plus (+) terminal. Use speakers with an impedance of 4 ohms or more, as low er impedance speakers can damage the unit.
E-5 Muting The volume is muted tempor arily when pressing the MUTE button on the remote control. Press again to restore the volume. X-Bass control When the power is fi rst tur ned on, the unit will enter the extra bass mode which emphasizes the bass frequencies, and “X-BASS” will appear .
E-6 T o remove iP od or iPhone adaptor Inser t the tip of a screwdriver (“-” type, small) into the adaptor hole as shown and lift upward to remov e.
E-7 Listening to a CD or MP3/WMA disc Disc playbac k 1 Press the ON/ST AND-BY button to turn the power on. 2 Press the CD button on the remote control or FUNCTION b utton repeatedly on the main unit to select CD function. 3 Press the OPEN/CLOSE button to open the disc tra y .
E-8 Random play The tracks on the disc can be pla yed in random order automatically . T o random play all tracks: Press and hold down PLA Y MODE button on the remote control until “Random” appears. Press the (CD/USB ) button. T o cancel random play: Press the PLA Y MODE button until “RDM” indicator disappears.
E-9 Listening to USB mass storage device/MP3 pla yer RRMCGA232AWSA Note: This product is not compatible with MTP and AA C fi le systems from USB mass storage de vice or MP3 play er . Procedure to pla yback MP3/WMA disc with folder mode on T o play bac k CD-R/RW .
E-10 Adv anced USB playbac k The following functions are the same as CD operations: Pag e Direct track sear ch .......................................................................................8 Repeat play .......................................
E-11 T o scan the preset stations The stations sav ed in the memory can be scanned automatically . (Preset memory scan) 1 Press the PRESET ( or ) button f or more than 0.5 seconds. The preset number will fl ash and the programed stations will be tuned in sequentially , for 5 seconds each.
E-12 12 When the preset time is reached, playbac k will star t. The volume will increase gr adually until it reaches the preset volume . The timer indicator will blink during timer playbac k. 13 When the timer end time is reached, the system will enter the power stand-b y mode automatically .
E-13 Headphones Do not turn the volume on to full at switch on and listen to music at moderate le vels . Excessive sound pressure from earphones and headphones can cause hear ing loss. Before plugging in or unplugging the headphone , reduce the volume .
E-14 Factory reset, clearing all memory 1 Press the ON/ST AND-BY button to enter the pow er stand-by mode. 2 While pressing down the OPEN/CLOSE button, press the ON/ST AND- BY button until “Clear All” appears. Caution: This operation will erase all data stored in memory including clock, timer settings, tuner preset, and CD program.
E-15 T uner Frequency range FM: 87.5 - 108 MHz AM: 530 - 1,710 kHz Preset 40 (FM and AM station) Speaker T ype 2-way type speaker system 1” (2.5 cm) Dome-T weeter 4-3/4” (12 cm) woofer Maximum input power 100 W Rated input power 50 W Impedance 4 ohms Dimensions Width: 5 - 13/16” (148 mm) Height: 10-1/4” (260 mm) Depth: 8” (203.
An important point after buying a device Sharp XL-HF200P(BK) (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sharp XL-HF200P(BK) yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sharp XL-HF200P(BK) - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sharp XL-HF200P(BK) you will learn all the available features of the product, as well as information on its operation. The information that you get Sharp XL-HF200P(BK) will certainly help you make a decision on the purchase.
If you already are a holder of Sharp XL-HF200P(BK), but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sharp XL-HF200P(BK).
However, one of the most important roles played by the user manual is to help in solving problems with Sharp XL-HF200P(BK). Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sharp XL-HF200P(BK) along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
