Instruction/ maintenance manual of the product XG-NV4SU Sharp
Go to page of 40
G. K. Associates, T okyo XG-NV4SU (Hyoushi)-ami nashi; 1998/10/14/18:00 XG - NV4SU SHARP CORPORA TION OSAKA, J AP AN Printed in Japan Imprimé au Japon Impreso en J apón TINS - 6505CEN1 T1970 - A 8P0.
E-1 Important Information IMPOR T ANT For your assistance in r eporting the loss or theft of your Color LCD Pr ojector , please r ecord the Serial Number located on the bottom of the pr ojector and r etain this information.
E-2 Important Information Important Safeguards ……………………………………………………… 3 Usage Guidelines ………………………………………………………… 4 For SHARP Assistance (U.
E-3 Important Information Impor tant Safeguar ds Electrical energy can perfor m many useful functions. This product has been engineer ed and manufactur ed to ensur e your personal safety . But IMPROPER USE CAN RESUL T IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD.
E-4 Important Information Cautions Concerning the Laser P ointer The laser pointer on the remote contr ol emits a laser beam from the laser light window . This is a Class II laser which may impair your sight if dir ected into the eyes. The three marks shown on the right ar e caution labels for the laser beam.
E-5 Important Information The SHARP LCD Projector enables easy pr ojection of large scr een, full-color computer and video images that can be pr ojected directly onto a video scr een or white wall. This lightweight, convergence-fr ee system allows for easy installation.
E-6 Important Information P ar t Names For details on the use of each contr ol and terminal, refer to the page number indicated in the brackets. Pr ojector Fr ont View Focus knob [p. 11] Zoom knob [p. 11] Remote contr ol sensor [p. 8] Carrying handle [p.
E-7 Important Information Wireless Mouse Remote Contr ol Fr ont View ON MUTE BLACK SCREEN R-CLICK ENTER COMPUTER MOUSE LIGHT LCD PROJECTOR ADJ. VIDEO CHECK AUTO SYNC MENU LASER VOL OFF TRANSMIT indicator MOUSE/ ADJUSTMENT buttons ( ∂ / ƒ / ß / © ) [pp.
E-8 Important Information T ransmission range Reception range Remote control and remote mouse receiver positioning The remote contr ol can be used to contr ol the projec- tor in the ranges shown on the left. The remote mouse r eceiver can be used with the remote contr ol in the ranges shown to contr ol the mouse functions of a connected computer .
E-9 Important Information c. Moving the mouse cur sor Press ∂ / ƒ / ß / © on the remote contr ol to move the mouse cursor on the screen. • The amount of pr essure applied to the ∂ / ƒ / ß / © buttons determines the speed the mouse cursor travels.
Operation E-10 Setting Up the Pr ojector (Standar d Setup) Optimal image quality can be achieved when the pr ojector is positioned perpendicular to the scr een with all feet flat and level. • Position the scr een so that it is not in direct sunlight or r oom light.
Operation E-11 Basic Operations a b c d When the main power is on, the POWER indicator lights up red. When the power is on, the LAMP REPLACE- MENT indicator flashes to show the operating condition of the lamp. Green: Lamp is ready . Flashing green: W arming up.
Operation E-12 Basic Operations g. Selecting the Video Input System Mode The video input system mode is set to “AUTO” at the factor y; however , it can be changed to a differ ent system mode, if the selected system mode is not compatible with the connected audiovisual equipment (such as when a color image appears in black and white, etc.
Operation E-13 i Basic Operations i. Checking the Input Mode Press INPUT SELECT on the pr ojector or IN- PUT CHECK on the remote contr ol. The curr ent input mode will be displayed on the screen for 4 seconds. j. Adjusting the V olume Press V OLUME (V OL) ` / 1 on the pr ojector or the remote contr ol.
Operation E-14 (When using the remote contr ol to operate the menu screens, slide the MOUSE/ADJUSTMENT switch to the ADJ . position.) 1. Press MENU on the pr ojector or the remote contr ol to displa y the RGB1, RGB2 or VIDEO mode menu screen.
Operation E-15 Picture Adjustments This pr ojector’ s picture is factory pr eset to standard settings. However , you can adjust it to suit your own prefer - ences by adjusting the four pictur e modes: “PICTURE”, “BRIGHT”, “RED” and “BLUE”.
Operation E-16 Computer Adjustments When displaying computer patterns which repeat every dot (tiling, vertical stripes, etc.), inter ference may occur between the LCD pixels, causing flickering, vertical stripes, or contrast irregularities in portions of the screen.
Operation E-17 • When connecting thir d party video cards and other Macintosh computers, set “MODE” to “ON” or “OFF” to select the correct display mode. • When the input signal is automatically detected or when there is no input signal, “MODE(---)” appears on the screen and the display mode cannot be changed.
Operation E-18 A udio Adjustments This pr ojector’ s audio is factory preset to standard settings. However , you can adjust it to suit your own prefer - ences by adjusting “TREBLE” and “BASS”. On-screen Display a. Displa ying the “A UDIO” screen Press MENU to display the menu scr een.
Useful Features E-19 On-screen Display RGB1 ADJ. RGB1 INPUT ADJ. IMAGE ADJ. AUDIO SYSTEM SETUP LANGUAGE :SEL. :NEXT ENTER :END MENU Chec king the System Setup This function allows you to check the curr ent input signal and lamp usage time. a. Displa ying the “SYSTEM SETUP” screen Press MENU to display the menu scr een.
Useful Features E-20 Presentation Image Blac k Screen Function This function can be used to superimpose a black screen over a pr esentation image. a. Blacking out the ima ge Press BLA CK SCREEN on the projector or the remote contr ol to black out the image.
Useful Features E-21 On-screen Display VIDEO ADJ. BACKGRND LVL IMAGE ADJ. AUDIO SYSTEM SETUP LANGUAGE :SEL. :NEXT ENTER :END MENU Blue Screen Function (VIDEO mode onl y) This function can be used to d.
Useful Features E-22 Using the Re ver se/In ver t Image Function This pr ojector is equipped with a reverse/invert image function which allows you to r everse or invert the pro- jected image. • This function is useful for the r eversed image and ceiling-mount setups.
Setup & Connections E-23 90˚ 90˚ • The zoom lens enables adjustment of the picture size within the adjustment range. • For optimum picture adjustment, the projector should be placed at a distance fr om the screen according to the desired pictur e size (see the table below).
Setup & Connections E-24 Rever sed Image and Ceiling-mount Setups Using the Reverse/Invert Image Function makes the following setups possible. See page 22 for use of this func- tion.
Setup & Connections E-25 Connecting a Computer Y ou can connect your projector to a computer for easy pr ojection of full color computer images. See page 26 for details on the connections.
Setup & Connections E-26 a a. Connecting an IBM-PC (V GA, SV GA, XGA) Series computer 1,024 @ 768 maximum resolution Plug one end of the supplied computer cable into the COMPUTER INPUT port on the pro- jector and the other end into the RGB signal output port (Monitor Out) on the computer , and secure the plugs by tightening the thumb screws.
Setup & Connections E-27 Connecting Video Equipment Y ou can connect your projector to a VCR, laser disk player or external audio components. CAUTION • Always turn off the pr ojector while connecting to video equipment, in or der to protect both the pr ojector and the equip- ment being connected.
Maintenance & T roubleshooting E-28 Air Filter Maintenance • This projector is equipped with two air filters to ensur e the optimal operating condition of the projector . • The air filters should be cleaned ever y 100 hours of use. Clean the filters more often when the pr ojector is used in a dusty or smoky location.
Maintenance & T roubleshooting E-29 Lamp/Maintenance Indicator s Lamp The lamp in this projector operates for appr oximately 2,000 cumulative hours, depending on the usage environ- ment. When the lamp has been used for 1,900 hours, the LAMP REPLACEMENT indicator will light r ed and “LAMP” will flash in yellow on the scr een.
Maintenance & T roubleshooting E-30 Replacing the Pr ojection Lamp The lamp in this pr ojector operates for approximately 2,000 cumulative hours, depending on the usage envir onment. When the lamp has been used for 1,900 hours, the LAMP REPLACEMENT indicator will light r ed and “LAMP” will flash in yellow on the screen.
Maintenance & T roubleshooting E-31 Replacing the Projection Lamp Using the K ensington Loc k This projector has a Kensington Security Standar d connector for use with a Kensington MicroSaver Security System. Refer to the information that came with the system for instructions on how to use it to secure the pr ojector .
Appendix E-32 T ranspor ting the Pr ojector When transporting the projector , carr y it by the carr ying handle on the side of the pr ojector . A soft-side carr ying bag is also pr ovided to transpor t the projector .
Appendix E-33 Connection Pin Assignments Analog Computer 1 and 2 Signal Input P or ts: 15-pin mini D-sub female connector Computer Input Analog 1. Video input (red) 2. Video input (green) 3. Video input (blue) 4. Reserve input 1 5. Composite sync 6. Ear th (red) 7.
Appendix E-34 Commands EXAMPLE • When “BRIGHT” of RGB 1 IMAGE ADJUSTMENT is set to 1 10. • If a dash (_) appears in the parameter column, enter a space. If an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL CONTENTS.
Appendix E-35 The computer output signal timing of differ ent types of computer signals are shown below for refer ence. For IBM and compatibles Input Signals (Recommended Timing) For Macintosh Series .
Appendix E-36 Specifications Product type Model Video system Display method LCD panel Lens Projection lamp Brightness (ANSI lumen) Contrast ratio Video input signal S-video input signal Horizontal res.
Appendix E-37 Dimensions Rear View 10 9 / 32 (261) 2 13 / 32 (61) 5 19 / 32 (142) 9 11 / 32 (237.5) 1 5 / 16 (33.5) 12 13 / 64 (310) 5 3 / 64 (128) 5 / 8 (16) 7 / 16 (11) 1 5 / 64 (27.5) 13 17 / 64 (337) 2 13 / 32 (61) 4 49 / 64 (121) 3 21 / 32 (93) 3 1 / 32 (77) 15 / 16 (24) 9 19 / 32 (243.
Appendix E-38 Notes XG-NV4SU (E)-f 98.10.19, 5:44 PM 38.
G. K. Associates, T okyo XG-NV4SU (Hyoushi)-ami nashi; 1998/10/14/18:00 XG - NV4SU SHARP CORPORA TION OSAKA, J AP AN Printed in Japan Imprimé au Japon Impreso en J apón TINS - 6505CEN1 T1970 - A 8P0.
An important point after buying a device Sharp XG-NV4SU (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sharp XG-NV4SU yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sharp XG-NV4SU - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sharp XG-NV4SU you will learn all the available features of the product, as well as information on its operation. The information that you get Sharp XG-NV4SU will certainly help you make a decision on the purchase.
If you already are a holder of Sharp XG-NV4SU, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sharp XG-NV4SU.
However, one of the most important roles played by the user manual is to help in solving problems with Sharp XG-NV4SU. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sharp XG-NV4SU along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center