Instruction/ maintenance manual of the product XG-E3500U Sharp
Go to page of 38
E-1 Dear SHARP Customer W elcome to the SHARP F amily . We are pleased that y ou are now the owner of a SHARP Color LCD Projector built f or outstanding quality , reliability and performance. Every SHARP Color LCD Projector is adjusted for a proper picture and has passed through the most stringent quality control tests at the factory .
E-2 W ARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not e xpressly approved b y the manuf acturer could v oid the user’ s author ity to operate this equipment.
E-3 14) Lightning – For added protection for this product during a lightning storm, or when it is left unattended and unused f or long periods of time, unplug it from the wall outlet and disconnect the cab le system. This will pre vent damage to the product due to lightning and power-line surges.
E-4 Notes on Operation About the T emperature Monitor Function: • If the projector star ts to ov erheat due to set-up problems or a dir ty air filter , “TEMP .
E-5 MENU ENTER LENS MUTE VOLUME INPUT SELECT BLACK SCREEN MN LN B IN ADJ. EN MENU button ENTER button ADJUSTMENT ( / ,/ ) buttons LENS button MUTE button V OLUME UP- DO WN buttons INPUT SELECT button .
E-6 ON MUTE MN LN BLACK SCREEN/ LENS B R-CLICK/ENTER INPUT SELECT DATA1 CHECK MOUSE LIGHT LCD PROJECTOR ADJ. DATA2 VIDEO1 VIDEO2 LASER/ MENU VOL OFF Operating the Wireless Mouse Remote Control The fun.
E-7 Using the optional cable with the remote control • When the remote control cannot be used due to the range or positioning of the projector (rear projection, etc.), connect the optional cable from the Wired Remote Control Input jack on the remote control to the Wired Remote Input on the side of the projector .
E-8 Wireless Mouse Functions m The wireless mouse functions and laser pointer on the remote control can help y ou create a more prof essional presentation.
E-9 Setting Up the Projector Using the Focus, Zoom and Lens Shift • Lens Shift, Zoom, F ocus and Re v ersed/Inv er ted Image mode functions broaden your options f or projector placement. • See pages 10, 12 and 13 f or details on projector setup . SIDE VIEW Lens Shift Zoom Ceiling setting Invert Image T able setting Zoom 3.
E-10 Height of Pr ojector m This projector is equipped with a lens shift function that lets you adjust the projection height without mo ving the projector .
E-11 Using the Image Invert/Reverse Function ■ This projector is equipped with an image in v er t/re verse function. The projected image can be in ver ted or re v ersed by using the MENU b utton and the ADJUSTMENT / and / buttons . 1 1. Press the MENU button.
E-12 How to set up the pr ojector and screen Cautions: When setting up the pr ojector • F or minimal ser vicing and to maintain high image quality , SHARP recommends that this projector be installed in an area free from humidity , dust and cigarette smoke .
E-13 Example of a ceiling-mount setup Bef ore mounting the projector , be sure to contact y our nearest Authorized Sharp Industr ial LCD Products Dealer to obtain the manuf acturer recommended ceiling mount brac ket (sold separately). (AN-XGCM20 Ceiling Mount Brac ket, AN-EP101AP Extension T ube).
E-14 Adjusting the Height of the Picture ■ When adjustments f or the projector position cannot be made using the Lens Shift alone, or when the projector stand is on an angle, use the adjuster release to adjust the v er tical angle of the projector .
E-15 Connecting the Pr ojector (VIDEO 1, VIDEO 2) ■ T o watch video pla ybac k with the projector connected to audio/video output equipment, such as a VCR, or Laser Disc Pla yer or D VD Play er or to view on a separ ate monitor , make the f ollowing connections .
E-16 Connecting the Pr ojector (RGB 1, 2: Computer) • Please carefully read the manual of the computer y ou will be connecting. • Bef ore connecting, be sure to tur n both the projector and the computer off. After making all connections, turn the projector on first.
E-17 ANALOG RGB OUT OUTPUT INPUT1 RGB COMPUTER Connecting to the Computer RGB Input (RGB 1)/Output (RGB 1, 2) T erminals ■ Y ou can connect your projector to a computer f or easy projection of full-color computer images, and an e xter nal monitor f or simultaneous viewing.
E-18 3. Connecting to other compatible computers When connecting the projector to a compatible computer other than an IBM-PC (V GA/SV GA/XGA/SXGA) or Macintosh series, a separate cab le is needed.
E-19 Connecting the Pr ojector (RGB 2) Connecting to the Computer RGB 2 Input T erminals ■ Pre v ents a deterioration of picture quality to enable 5 BNC computer input. • Bef ore connecting, be sure to tur n both the projector and the equipment off .
E-20 Input Signals (Recommended Timing) For IBM and compatibles Input signals: The video output signal timing of diff erent types of video signals are shown below for reference.
E-21 RGB Adjustment Contr ols ■ When displa ying computer patterns which repeat ev er y other dot (tiling, ver tical stripes, etc.), interf erence ma y occur between the LCD pix els, causing flick er ing, vertical str ipes, or contr ast irregularities in por tions of the screen.
E-22 1 When RGB 1 or 2 is selected. Computer Mode Memory Adjustments • The projector has been preset with diff erent modes f or use with SV GA and other compatible computers . Howe ver , 7 memor y positions are provided to store mode adjustments. • Each memor y position can be used to store mode adjustments to match the computer .
E-23 ON/OFF POWER LAMP TEMP. Basic Operation of the Projector 1 When the power is on, the LAMP REPLACEMENT indicator flashes to show the operating condition of the lamp. Green: Lamp is ready Flashing green: W arming up Red: Change bulb ON A.C.120V C.A.
E-24 On-Screen Display LANGUAGE :SEL. :ENTER ENTER :END MENU NEDERLANDS ESPAÑOL DEUTSCH ENGLISH SVENSKA ITALIANO FRANÇAIS 4. Select one of eight ON-SCREEN DISPLA Y languages.
E-25 6. Select input. Press the INPUT SELECT button on the projector to s witch the picture input. When y ou press the button, the current input mode is display ed f or about 4 seconds. If you press the b utton again while the input mode is displa yed, the mode changes as shown on the left.
E-26 Adjusting the Picture 3 • This projector’ s picture is f actor y preset to standard settings. Howe ver , you can adjust it to suit y our own preferences with the ADJUSTMENT b uttons on the projector and the remote control. • The adjustments can be memorized in RGB 1, RGB 2 or VIDEO separately .
E-27 Adjusting the A udio On-Screen Display AUDIO TREBLE BASS RESET 0 0 0 :SEL. :ADJ. :END MENU R L + - + - BALANCE ADJUSTMENT button Increased audio from the left speaker Weak er treble Weak er bass .
E-28 Setting Up the System ■ Using this function, you can chec k the input signal and lamp usage time, and select the remote mouse and DC 5V output. Checking the system and lamp usa ge time • Press the MENU button. Select “SYSTEM SETUP” with the ADJUSTMENT / buttons.
E-29 Using the Blac k Screen Function ■ This projector is equipped with a Black Screen Func- tion. This function can be used to blac k out the presen- tation image. • Press the BLA CK SCREEN button on the projector or the remote control to displa y the blac k screen.
E-30 On-Screen Displa y Using the Blue Screen Function ■ This projector is equipped with a Blue Screen function that will turn the screen blue when the video input terminal is not connected to anything, or the video component is turned off. • Press the MENU button.
E-31 Air Filter Maintenance ■ The air filter should be cleaned e very 100 hours of use. Clean the filter more often when the projector is used in a dusty or smoky location. ■ Hav e your nearest A uthor ized Sharp Industr ial LCD Products Dealer or Ser vice Center e xchange the filter (PFILD0082CEZZ) when it is no longer possible to clean it.
E-32 Lamp/Maintenance Indicators Lamp ■ The Lamp has a finite operating lif e of 1,500 hours. The lamp lif e may diff er , howe ver , depending on the usage environment. • When the lamp is nearing the end of its operating life , the picture and color quality will deteriorate.
E-33 Connection Pin Assignments Analog RGB 1 Signal Input and Analog RGB 1 and 2 Output T erminal : 15-pin mini D-sub f emale connector Computer Input Analog 1. Video input (red) 2. Video input (green/sync on green) 3. Video input (blue) 4. Reser ve input 1 5.
E-34 1. PC control The personal computer can be used to control the projector by connecting the tw o via an RS-232C cable (cross type) (not supplied). 2. Communication conditions Set the serial por t settings of the computer to match that of the table below .
E-35 Examples: F or the RGB/VIDEO setting, select video and set the P AL mode. Computer → ← O K I V E D — — — 1 → ← O K M E S Y — — — 2 Switch to video screen Set to P AL mode Unit When BRIGHT of VIDEO IMAGE ADJUSTMENT is set to ⳮ 10.
E-36 Wired Remote Contr ol T erminal Specifications 1. Specifications of wired remote contr ol input • 4.4ø minijack • External: +5V (1A) • Internal: GND 2.
E-37 Specifications are subject to change without notice. Specifications Product T ype Model Video system Display method LCD panel Lens Projection lamp Contrast ratio Video input signal S-video input .
E-38 3.7 ⬙ (95) 11.7 ⬙ (296) ø1.8 ⬙ (ø45) 3.5 ⬙ (89) 1.8 ⬙ (46) 8.2 ⬙ (208) 0.2 ⬙ (6) ø4.7 ⬙ (ø120) 4.8 ⬙ (121.1) 3.8 ⬙ (96.9) 0.
An important point after buying a device Sharp XG-E3500U (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sharp XG-E3500U yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sharp XG-E3500U - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sharp XG-E3500U you will learn all the available features of the product, as well as information on its operation. The information that you get Sharp XG-E3500U will certainly help you make a decision on the purchase.
If you already are a holder of Sharp XG-E3500U, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sharp XG-E3500U.
However, one of the most important roles played by the user manual is to help in solving problems with Sharp XG-E3500U. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sharp XG-E3500U along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
