Instruction/ maintenance manual of the product OnSite 441 Avocent
Go to page of 2
Cyclades OnSite Branch Office Appliance Advanced Out-of-Band Management for Branch and Remote Offices Cyclades ® OnSite branch office appliance provides both remote sites and branch offices with a compact, cost-effective solution for managing IT assets.
Corporate Headquarters 4991 Corporate Drive, Huntsville, AL 35805 TEL 866.277.1924 FAX 256.430.4030 www.avocent.com Avocent, the Avocent logo, The Power of Being There and Cyclades are trademarks or registered trademarks of Avocent Corporation or its affiliates.
An important point after buying a device Avocent OnSite 441 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Avocent OnSite 441 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Avocent OnSite 441 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Avocent OnSite 441 you will learn all the available features of the product, as well as information on its operation. The information that you get Avocent OnSite 441 will certainly help you make a decision on the purchase.
If you already are a holder of Avocent OnSite 441, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Avocent OnSite 441.
However, one of the most important roles played by the user manual is to help in solving problems with Avocent OnSite 441. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Avocent OnSite 441 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center