Instruction/ maintenance manual of the product R-1872T Sharp
Go to page of 8
2 W ALL CONSTRUCTION This Microwave Oven/Hood should be mounted against and sup- ported by a flat vertical wall. The wall must be flat for proper installation. If the wall is not flat, use spacers to fill in the gaps. W all construction should be a minimum of 2" x 4" wood studding and 3 / 8 " or more thick dry wall or plaster/lath.
3 ELECTRICAL GROUNDING INSTRUCTIONS This appliance must be grounded. This oven is equipped with a cord having a grounding wire with a ground- ing plug. It must be plugged into a wall receptacle that is properly installed and grounded in accordance with the National Electrical Code and local codes and ordinances.
3 6 INST ALLA TION HARDW ARE T he INST ALLA TION HARDW ARE (items 1 - 7 ) packed with the oven should contain the following: I TEM NAME QUANTITY P ART CODE 1 Wood Screw 5 X 30 mm 6 XTSS750P35000 2 T o.
8 PREP ARA TION OF THE OVEN 1. Rest the oven on its side as shown in Figure 7. Place portion (C) of the carton underneath to protect the outercase from being damaged. 2. Remove the two screws which secure the mounting plate to the r ear side of the oven.
5 Figure 1 1 Wire Box C. VERTICAL EXHAUST : Outside V entilation 1 . Remove and save the 4 screws from the Fan Cover Bracket. Remove Fan Cover Bracket by sliding it in the opposite direction of the arrow on the Fan Cover Bracket as shown in Figure 13.
6 10 OVEN INST ALLA TION THIS OVEN CANNOT BE PROPERL Y INST ALLED WITHOUT REFERRING T O THE MOUNTING I NSTRUCTIONS FOUND ON BOTH TEMPLA TES. READ AND FOLLOW MOUNTING INFORMA TION ON BOTH TOP CABINET AND W ALL TEMPLA TES. MOUNTING PLA TE 1 . Separate 4 T oggle Bolts 2 , packed in the INST ALLA TION HARDWARE, from the T oggle Nuts.
4 . Thread the power supply cord through the hole made in the bot- tom of the top cabinet. 5. Hang the oven on the lower edge of the mounting plate. Rotate the unit upward. See Figure 22. T ake care that the power cord is able to clear the edge of the hole as the oven is rotated upward.
8 CHECK LIST FOR INST ALLA TION 1. Make sure the unit has been installed according to all of the Installation Instructions, the T op T emplate and W all T emplate. 2 . Remove all packing material from the oven. 3. Plug in the power cord. 4. Read the Operation Manual.
An important point after buying a device Sharp R-1872T (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sharp R-1872T yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sharp R-1872T - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sharp R-1872T you will learn all the available features of the product, as well as information on its operation. The information that you get Sharp R-1872T will certainly help you make a decision on the purchase.
If you already are a holder of Sharp R-1872T, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sharp R-1872T.
However, one of the most important roles played by the user manual is to help in solving problems with Sharp R-1872T. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sharp R-1872T along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
