Instruction/ maintenance manual of the product PG-C20X Sharp
Go to page of 53
LCD PR OJECT OR OPERA TION MANU AL Important Information Setup & Connections Operation Useful Features Maintenance & T r oubleshooting Appendix MODEL PG - C20XU.
E-1 Important Information IMPOR T ANT For your assistance in r eporting the loss or theft of your Color LCD Pr ojector , please record the Serial Number located on the bottom of the pr ojector and retain this information.
E-2 Important Information PR ODUCT DISPOSAL This product utilizes tin-lead solder , and high intensity discharge lamp (HID lamp) containing a small amount of mercury .
E-3 Important Information Electrical energy can perform many useful functions. This product has been engineered and manufactur ed to ensure your personal safety .
E-4 Important Information Outstanding Features 1. AD V ANCED COMP A TIBILITY WITH HIGH-END W ORKST A TIONS AND PCS Compatible with up to 85 Hz vertical refr esh rate, Sync on Green and Composite Sync signals for use with a wide variety of high-end PCs and Workstations.
E-5 Important Information Important Information Contents IMPOR T ANT SAFEGU ARDS …………………… 3 Outstanding Features …………………………… 4 Contents …………………….
E-6 Important Information T emperature Monitor Function If the projector starts to overheat due to setup pr oblems or a dir ty air filter , “TEMP .” will appear in the lower -left cor ner of the picture.
E-7 Important Information How to Access the PDF Operation Manuals (for Windows and Macintosh) PDF operation manuals in several languages are included in the CD-ROM. T o utilize these manuals, you need to install Adobe Acrobat Reader on your PC (Windows or Macintosh).
E-8 Important Information Pr ojector P ar t Names Numbers next to the part names refer to the main pages in this manual wher e the topic is explained. Fr ont and T op View ON/OFF POWER LAMP TEMP.
E-9 Important Information Fr ont View P ar t Names Rear View Remote Control 22 23 FREEZE button Mouse ( ß ) button MOUSE button INPUT button MENU button KEYSTONE buttons VOLUME buttons POWER button R.
E-10 Setup & Connections Setup & Connections.
E-11 Setup & Connections Power cord CACCU5013DE01 Computer RGB cable QCNWG0002CEZZ Computer audio cable QCNW-4870CEZZ Remote control RRMCG1613CESA T wo AAA size batteries Supplied Accessories CD-R.
E-12 Setup & Connections COMPUTER COMPUTER AUDIO AUDIO OUTPUT (INPUT 1) INPUT 1 RS-232C Connecting the P ower Cor d Plug the supplied power cor d into the AC socket on the back of the projector . Connecting the Pr ojector to a Computer Y ou can connect your projector to a computer for projection of full color computer images.
E-13 Setup & Connections When connecting the pr ojector to a compatible computer other than an IBM-PC (VGA/SVGA/XGA/SXGA) or Macintosh (i.e. Workstation), a separate cable may be needed.
E-14 Setup & Connections COMPUTER COMPUTER AUDIO AUDIO OUTPUT (INPUT 1) INPUT 1 RS-232C Connecting the Projector Connecting a video sour ce (DTV decoder or D VD play er) using the 15-pin input 1 Connect one end of the HD-15/RCA cable or the HD- 15-RGB cable to the COMPUTER INPUT 1 port on the projector .
E-15 Setup & Connections Connecting RS-232C Po r t When the RS-232C port on the projector is connected to a computer with an RS-232C cable (null modem, cr oss type, sold separately), the computer can be used to contr ol the projector and check the status of the pr ojector .
E-16 Operation Operation ON/OFF POWER LAMP TEMP. KEYSTONE INPUT BACK ENTER MENU AUTO SYNC 2 Basic Operations 1 Make the necessary connections before pr o- ceeding. Connect the power cor d to a wall outlet. The POWER indicator illuminates r ed and the projector enters standby mode.
E-17 Operation Basic Operations 4 3 3 Slide the ZOOM knob. The image can be adjusted to the desired size within the zoom range. 4 Rotate the FOCUS ring until the image on the screen becomes clear . 5 Press INPUT to select the desir ed input mode. Press INPUT again to change the mode.
E-18 Operation Position the pr ojector perpendicular to the screen with all feet flat and level to achieve an optimal image. Move the pr ojector forward or backward if the edges of the image ar e distorted. • The projector lens should be centered in the middle of the scr een.
E-19 Operation Setting up the Screen Using the Adjustment Feet Y ou can adjust the height of the image by raising the projector with the foot releases. 1 Press the foot r eleases and lift the projector to the desir ed angle. (Adjustable up to approximately 7° fr om the standard position.
E-20 Operation Setting up the Screen Projector Digital K eystone Correction Remote control • When the image is distor ted due to the projection angle, the digital keystone corr ection function allows you to corr ect it. • The digital keystone correction can be made by pressing KEYST ONE , or by setting “Keystone” correction in the GUI menu.
E-21 Operation Operating the Wireless Mouse from the Remote Contr ol Y ou can use the remote control as a r emote mouse. Connecting the Remote Mouse Receiver 1 Connect one end of the supplied USB mouse control cable to the cor responding terminal on the computer .
E-22 Operation Using the Wireless Mouse Remote Contr ol/Mouse Receiver P ositioning • The remote control can be used to contr ol the projector within the ranges shown below . • The remote mouse r eceiver can be used with the remote control to contr ol the mouse functions of a connected computer within the ranges shown below .
E-23 Operation ON/OFF POWER LAMP TEMP. KEYSTONE INPUT BACK ENTER MENU AUTO SYNC 7 2 , 4 , 6 3 , 5 1 , 8 Using the GUI (Graphical User Interface) Men u Screens (GUI) On-screen Displa y 1 INPUT 1 (RGB) .
E-24 Operation Items on the INPUT 1 (RGB) Mode Men u Bar Using the GUI (Graphical User Interface) Menu Screens Main menu Main menu Sub menu Sub menu Fine Sync Options Signal Info Lamp Timer Language E.
E-25 Operation Items on the INPUT 2 (S-VIDEO) or INPUT 3 (VIDEO) Mode Menu Bar Main menu Sub menu Options Signal Info Lamp Timer Language English PRJ Mode Ceiling Front Ceiling Rear Deutsch Es.
E-26 Operation Selecting the On-screen Displa y Language Projector (GUI) On-screen Displa y English is the preset language for the On-scr een Display . The language can be set to English, German, Spanish, Dutch, French, Italian, Swedish, Portuguese, Chinese, Korean or Japanese.
E-27 Operation ON/OFF POWER LAMP TEMP. KEYSTONE INPUT BACK ENTER MENU AUTO SYNC 2 , 3 , 4 2 , 3 1 , 5 Picture Adjustments Y ou can adjust the projector’ s picture to your prefer - ences with the following picture settings.
E-28 Operation Computer Ima g e Adjustments (INPUT 1 mode onl y) A uto Sync Adjustment • Used to automatically adjust a computer image. • Auto Sync adjustment can be made manually by pressing A UT O SYNC .
E-29 Operation Computer Image Adjustments (INPUT 1 mode only) Adjusting the Computer Image When displaying computer patterns which are very detailed (tiling, vertical stripes, etc.), inter ference may occur between the LCD pixels, causing flickering, vertical stripes, or contrast irregularities in portions of the screen.
E-30 Useful Features Useful Features Freeze Function This function allows you to instantly freeze a moving image. This is useful when you want to display a still image from a computer or video, giving you mor e time to explain the image to the audience.
E-31 Useful Features 2 1 Digital Image Magnification This function allows you to magnify a specific portion of an image. This is useful when you want to display a detailed portion of the image. 1 Press ENLARGE on the remote contr ol. Each time ENLARGE is pressed, the image will be magnified.
E-32 Useful Features Gamma Correction Gamma mode Selected Mode Remote control For a highly defined image emphasizing high contrast and color repr oduction. Most suitable when viewing images in a brightly lit room. For a warm and moist image controlling contrast and brightness.
E-33 Useful Features Selecting the Picture Displa y Mode Remote control This function allows you to modify or customize the picture display mode to enhance the input image. Depending on the input signal, you can choose the picture display mode pr eferred.
E-34 Useful Features ON/OFF POWER LAMP TEMP. KEYSTONE INPUT BACK ENTER MENU AUTO SYNC 2 , 3 , 4 2 , 3 1 , 5 This function allows you to check the current input signal information and the accumulated lamp usage time. 1 Press MENU . 2 Press ∂ / ƒ to select “Options”, and then press ENTER .
E-35 Useful Features Function with toggle switch to contr ol the quantity of projected light. Select “ON” or “OFF” to decr ease or incr ease brightness, power consumption and fan noise.
E-36 Useful Features Rever se/In ver t Image Function This projector is equipped with a r everse/invert image function which allows you to reverse or invert the pr o- jected image for various applications.
E-37 Maintenance & T r oubleshooting Maintenance & T r oubleshooting Air Filter Maintenance • This projector is equipped with an air filter to ensur e the optimal operating condition of the pr ojector . • The air filter should be cleaned ever y 100 hours of use.
E-38 Maintenance & T r oubleshooting Air Filter Maintenance 4 Replace the filter co ver . Insert the tab on the end of the filter cover into the filter cover opening and pr ess the filter cover into position. 3 Clean the air filter . Clean the dust of f the air filter and cover with a vacuum cleaner extension hose.
E-39 Maintenance & T r oubleshooting Lamp/Maintenance Indicator s Maintenance Indicator s POWER LAMP TEMP. ON/OFF KEYSTONE • The war ning lights on the projector indicate pr oblems inside the projector .
E-40 Maintenance & T r oubleshooting Replacing the Pr ojection Lamp ON/OFF or Ta b 46 Remove the air filter . 5 Replace the air filter . 1 3 T urn off the po wer . 2 Disconnect the power cord. Unplug the power cord fr om the AC socket. Remove the filter co ver .
E-41 Maintenance & T r oubleshooting Replacing the Projection Lamp 7 Remove the lamp ca ge cover . T ur n over the projector and loosen the user service screw that secur es the lamp cage cover . Then lift open the cover in the direction of the arr ow .
E-42 Maintenance & T r oubleshooting Using the K ensington Loc k This projector has a Kensington Security Standar d connector for use with a Kensington Micr oSaver Security System. Refer to the information that came with the system for instructions on how to use it to secur e the projector .
E-43 Appendix Appendix Attaching the Lens Cap Put on the lens cap to pr event damage to the lens when transpor ting the projector . A lens cap strap is pr ovided to pr event the loss of the lens cap. 1 Attach the lens cap strap to the lens cap. 2 Attach the lens cap strap to the pr ojector .
E-44 Appendix Connection Pin Assignments COMPUTER INPUT 1 P ort: 15-pin mini D-sub female connector Computer Input Analog 1. Video input (r ed) 2. Video input (green/ sync on gr een ) 3. Video input (blue) 4. Not connected 5. Composite sync 6. GND (red) 7.
E-45 Appendix PC contr ol A computer can be used to contr ol the projector by connecting an RS-232C cable (null modem, cr oss type, sold separately) to the pr ojector . (See page 15 for connection.) Comm unication conditions Set the serial port settings of the computer to match that of the table.
E-46 Appendix CONTROL ITEM COMMAND C1 S S A A T T P P I I I I I I I R R R R R V V V V V V V V V R R R R R R R R R P P P P H H O O R R V V C M M B B B B B A A A A A A A A A A A A A A A A A A M M O O M .
E-47 Appendix Horizontal Frequency: 15–80 kHz V ertical Frequency: 43–85 Hz Pixel Clock: 12–108 MHz Compatible with sync on green and composite sync signals SXGA (1,280 1,024) compatible in .
E-48 Appendix Specifications Pr oduct type Model Video system Display method LCD panel Lens Projection lamp Contrast ratio Video input signal S-video input signal Horizontal resolution Audio output Co.
E-49 Appendix ON/OFF POWER LAMP TEMP. KEYSTONE INPUT BACK ENTER MENU AUTO SYNC FOCUS ZOOM 100-240V COMPUTER COMPUTER AUDIO AUDIO OUTPUT (INPUT 1) INPUT 1 RS-232C LR AUDIO INPUT INPUT 3 INPUT 2 S-VIDEO VIDEO (S-VIDEO, VIDEO INPUT) 6 43 / 64 (169.
E-50 Appendix Active digital keystone correction Corrects keystone distortion caused when the pr ojected image is not perpendicular to the screen. This method pr ovides not only horizontal correction, but vertical as well, thus maintaining the original 4:3 aspect ratio and eliminating jag lines.
E-51 Appendix Index A Active digital keystone correction .................................... 4 AC socket ......................................................................... 12 Adjustment buttons .................................................
SHARP CORPORA TION.
An important point after buying a device Sharp PG-C20X (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sharp PG-C20X yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sharp PG-C20X - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sharp PG-C20X you will learn all the available features of the product, as well as information on its operation. The information that you get Sharp PG-C20X will certainly help you make a decision on the purchase.
If you already are a holder of Sharp PG-C20X, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sharp PG-C20X.
However, one of the most important roles played by the user manual is to help in solving problems with Sharp PG-C20X. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sharp PG-C20X along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
