Instruction/ maintenance manual of the product LTV-19w3 Sharp
Go to page of 26
19” Widescreen LCD TV Model L TV -19w3.
1 T able of Contents IMPOR T ANT PRODUCT SAFETY INSTRUCTIONS ..................................................................................... 2 Antenna Installation Safety ..........................................................................
2 IMPORTANT PRODUCT SAFETY INSTRUCTIONS Read carefully and follow all warnings and instructions in this User's Manual and those marked on the product before you operate your television. Failure to follow warnings can result in personal injury or damage to product.
3 To assure proper ventilation, do not block the openings by placing the LCD TV on a bed, sofa, rug or other similar surface. Do not place it in a built-in installation, such as a bookcase or an enclosed rack, unless proper ventilation is provided. Other Notices and Precautions Caution : Never remove the rear cover.
4 Antenna Installation Safety Outdoor Antenna Grounding If an outside antenna or cable system is connected to the LCD TV, be sure the antenna or cable system is grounded so as to prevent voltage surges and built-up static charges.
5 Safety Guidelines Warning: This device must be operated with the original power supply, part number: VQ176222:1 CAUTION: The socket-outlet should be installed near the equipment and should be easily accessible. CAUTION: Use a power cable that is properly grounded.
6 Installation Congratulations on your purchase of a Westinghouse 19” wide screen LCD TV. Sleek and practical, this lightweight LCD TV delivers a crisp, vibrant picture and doubles as a superb WSXGA+ computer monitor —making it a practical solution for tight spaces in the office, bedroom, or kitchen.
7 2. Attach Base Stand to LCD TV Attach the base st and to the LCD TV st and neck. Align the holes and tabs, press and snap into place..
8 3. Connect Antenna, Cable, Video, S-Video, YPbPr, DVI, and/or VGA Cables Connect video and audio cables from compatible devices to the back panel of the LCD TV.
9 4. Connect Power Cable Connect the DC power adapter cord to the LCD TV and then connect the female AC power cord to the adapter. Plug the AC power cord into a properly grounded AC outlet. 5. Turn Power On Press the power button on the right side of the LCD TV or on the remote control.
10 6. Programming TV Channels 1. Select TV as the input using the Source button on the remote. 2. Press the Menu button to display the OSD Display Menu. 3. Use the CH Ÿ / ź arrow keys to highlight the TV Menu. 4. Using the Vol Ź arrow keys select the TV sub-menu.
1 1 Controls & Connections This section describes the side panel controls, and remote control in more detail. Front View of the Product Use the buttons on the right side panel control to display and adjust the On Screen Display (OSD). The OSD controls are explained at the bottom of the page and are defined in the “OSD Functions” section.
12 Remote Control The Remote Control should be used within 3 meters of the LCD TV. 1. Mute Switch the sound between on & off 2. MTS(Multi-channel TV Sound) Stereo and Mono selection 3. Sleep Use to shut off TV after a period of time 4. Power Switch the power between on & off 5.
13 OSD Functions This section describes each on-screen display (OSD) command. There are different OSD menus depending on whether you are in TV, Video (AV/S-Video/YPbPr) or PC (D-Sub/DVI) mode.
14 Audio Menu In the Audio Menu use the Vol Ź to select Audio sub-menu. Use CH Ÿ / ź to highlight function then use the Vol Ż / Ź arrow keys to change the values of the functions that are selected in the OSD menu.
15 TV Menu In the TV Menu use the V ol Ź to select TV sub-menu. Use CH Ÿ / ź to highlight function then use the V ol Ż / Ź arrow keys to change the values of the functions that are selected in the OSD menu. Function Name Explanation T uner System Select between STD, HRC, IRC, Air CH.
16 Function Name Explanation Language English, Chinese, François, Español OSD T ransparency Set OSD transparency level OSD Time-out Set the time to turn of f the OSD automatically OSD Position OSD h.
17 Rating Menus Press the V-Chip button on the remote control to access the Parental Control Menu. Enter the PIN code. Use the ź to highlight the Movie (MPAA) or TV (TVPG) menu. Use the Ź to select the sub-menu. Use the Ÿ / ź to highlight the Movie/TV Rating to be blocked or un-blocked.
18 PC OSD Menu Image Menu In the Image Menu use the V ol Ź to select image sub-menu. Use CH Ÿ / ź to highlight function then use the V ol Ż / Ź arrow keys to change the values of the functions that are selected in the OSD menu.. Function Name Explanation Brightness Brightness adjustment.
19 Audio Menu In the Audio Menu use the Vol Ź to select Audio sub-menu. Use CH Ÿ / ź to highlight function then use the Vol Ż / Ź arrow keys to change the values of the functions that are selected in the OSD menu.
20 Miscellaneous Menu In the Misc Menu use the Vol Ź to select Misc sub-menu. Use CH Ÿ / ź to highlight function then use the Vol Ż / Ź arrow keys to change the values of the functions that are selected in the OSD menu.
21 PC DVI OSD Menu PC OSD Menu for DVI Source has the same features as PC D-Sub except, only Brightness, Contrast, and Sharpness can be adjusted in the Image sub-Menu. PIP function Menu Picture In Picture (PIP) is available in D-Sub mode only . When pressing the PIP Menu button on the remote control the following menu appears.
22 If in Analog mode and the Display settings are not compatible with or are out of range of the LCD TV/Monitor the following will be displayed: Appendix Specifications Preliminary Product Specification Panel Size/T ype 19” wide screen Color TFT LCD.
23 Video Features Progressive scan Motion adaptive 3D de-interlacing 3D noise reduction Inverse 3:2 pull down Aspect Ratio Adjustment (Normal/Full/Zoom) Dynamic Luminance Control (DLC) Function Video .
24 improper connection • The red connector for right audio is easily confused with the red Pr connector in YPbPr component video input. Double check that they are correctly attached.
S E-U M-1904-0501 Santa Fe Springs, CA.
An important point after buying a device Sharp LTV-19w3 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sharp LTV-19w3 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sharp LTV-19w3 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sharp LTV-19w3 you will learn all the available features of the product, as well as information on its operation. The information that you get Sharp LTV-19w3 will certainly help you make a decision on the purchase.
If you already are a holder of Sharp LTV-19w3, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sharp LTV-19w3.
However, one of the most important roles played by the user manual is to help in solving problems with Sharp LTV-19w3. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sharp LTV-19w3 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
