Instruction/ maintenance manual of the product LC-52X20E Sharp
Go to page of 44
LC-42X20E LC-42X20S LC-46X20E LC-46X20S LC-52X20E LC-52X20S LCD COLOUR TELEVISION LCD-F ARBFERNSEHGERÄT TÉLÉVISEUR COULEUR À ÉCRAN CRIST AUX LIQUIDES (LCD) TELEVISORE A COLORI LCD LCD-KLEURENTELE.
SPECIAL NOTE FOR USERS IN THE U.K. The mains lead of this product is fi tted with a non-rewir eable (moulded) plug incorporating a 13A fuse. Should the fuse need to be replaced, a BSI or AST A approved BS 1362 fuse marked or ASA and of the same rating as above, which is also indicated on the pin face of the plug, must be used.
OPERA TION MANUAL Contents .........................................................................................1 Introduction .................................................................................... 2 Dear SHARP customer .............
• “HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or r egistered trademarks of HDMI Licensing LLC.” Intr oduction • Cleaning—Unplug the AC cord fr om the AC outlet before cleaning the product. Use a damp cloth to clean the pr oduct.
Introduction 15 16 17 18 19 20 21 22 23 24 25 4 3 2 5 6 7 8 9 10 11 12 13 14 1 1 B (Standby/On) (Page 10) 2 Buttons for useful operations m (T eletext) A TV : Display analogue teletext.
Introduction 2 3 4 12 13 16 6 7 8 9 10 11 1 15 14 5 1 AC INPUT terminal 2 EXT 3 terminals 3 EXT 4 (HDMI) terminal 4 Headphones 5 SERVICE socket 6 EXT 1 (RGB) terminal 7 EXT 2 (RGB) terminal 8 EXT 8 (C.
Pr eparation Supplied accessories Attaching the stand unit • Before attaching (or detaching) the stand, unplug the AC cor d from the AC INPUT terminal. • Before performing work spr ead cushioning over the base area to lay the TV on. This will prevent it fr om being damaged.
Preparation Inserting the batteries Before using the TV for the first time, insert two “AAA” size batteries (supplied). When the batteries become depleted and the remote contr ol unit fails to operate, replace the batteries with new “AAA” size batteries.
Quick guide Initial installation overview Follow the below steps one by one when using the TV for the first time. Some steps may not be necessary depending on your TV installation and connection. Pr eparation n Connect antenna cable to the antenna terminal.
Before turning on the power Quick guide Supplying power to the antenna Y ou must supply power to the antenna in order to receive digitally/terr estrially broadcast stations after connecting the antenna cable to the antenna input terminal on the back of your TV .
Quick guide Initial auto installation When the TV powers on for the first time after purchase, the initial auto installation wizar d appears. Follow the menus and make the necessary settings one after another .
W atching TV TV indicator status B indicator Status Off Power off Green Power on Red Standby NOTE • If you are not going to use this TV for a long period of time, be sure to r emove the AC cord from the power outlet. • A small amount of electric power is still consumed even when a is turned off.
W atching TV EPG (Electronic Pr ogramme Guide) EPG (Electronic Pr ogramme Guide) is a programme list that is displayed on the screen. With the EPG, you can check the schedule of DTV/RADIO/DA T A, view detailed information about them, tune to an event currently on-air and set a timer for future events.
Selecting a programme using EPG 3 Check programme information Press a / b / c / d to select the pr ogramme you want to check. Press R . EPG [Mon]16/04 10:57 AM [DTV-TV] T oday (Tue)20 (Wed)21 (Thu)22 (Fri)23 (Sat)24 (Sun)25 (Mon)26 040 10 : 00AM - 1 : 00 AM BBC News 24 BBC News Programme Info.
W atching TV Timer recor ding using EPG Y ou can record TV pr ogrammes using data from the EPG. Press EPG . Press a / b / c / d to select the pr ogramme you want to recor d, and then press OK . Press c / d to select the pr eferred timer setting, and then press OK .
Buttons for teletext operations Buttons Description P ( r / s ) Increase or decr ease the page number . Colour (R/G/Y/B) Select a group or block of pages displayed in the coloured brackets at the bottom of the screen by pr essing the corresponding Colour (R/G/Y/B) on the remote contr ol unit.
Connecting exter nal devices E Before connecting ... • Be sure to turn off the TV and any devices befor e making any connections. • Firmly connect a cable to a terminal or terminals. • Carefully r ead the operation manual of each exter nal device for possible connection types.
HDMI connection Connecting external devices The HDMI connections (High Definition Multimedia Interface) permit digital video and audio transmission via a connection cable from a player/r ecorder . The digital picture and sound data ar e transmitted without data compression and ther efore lose none of their quality .
SCART connection Connecting external devices E When using the EXT 1 (SCART) terminal E When using the EXT 2 (SCART) terminal If your VCR supports TV -VCR advanced A V Link systems, you can connect the VCR using a fully wired SCART cable.
Connecting external devices DIGIT AL AUDIO IN L R AUX1 IN L R AUX OUT Speaker/amplifier connection Connect an amplifier with external speakers as shown below .
Inserting a CA Card In order to r eceive coded digital stations, a Common Interface Module (CI Module) and a CA Card must be inserted in the CI slot of your TV set. (Page 8) The CI Module and the CA Card ar e not supplied accessories. They are usually available fr om your dealer .
Controlling HDMI devices using AQUOS LINK What is AQUOS LINK? Using the HDMI CEC (Consumer Electronics Contr ol) protocol, with AQUOS LINK you can interactively operate compatible system devices (A V amplifier , DVD, Blu-ray Disc device) using a single remote contr ol.
Connecting an AQUOS BD Player/AQUOS Recorder only HDMI cable AQUOS AUDIO speaker system Connecting an AQUOS BD Player/AQUOS Recorder via the AQUOS AUDIO speaker system HDMI cable AQUOS BD Player/ AQUOS Recorder HDMI cable Optical AUDIO cable AQUOS LINK AQUOS LINK Auto power on If this is activated, the One T ouch Play function is enabled.
AQUOS LINK Operating an AQUOS LINK device AQUOS LINK allows you to operate the HDMI- connected device with one remote contr ol. Open the remote contr ol’ s flip cover .
Menu operation What is the Menu? • Y ou need to bring up the On-Screen Display to perform settings for the TV . The On-Screen Display for the settings is called “Menu”. • The Menu enables various settings and adjustments. • The Menu can be operated with the remote contr ol unit.
Action Mode This function improves LCD r esponse and moving picture quality by r educing motion blur . Press ACTION to turn the Action Mode on/off. • The Action Mode screen indicates the curr ent on/off status. • The Action Mode screen goes out after several seconds.
Monochrome For viewing a video in monochrome. Range of OPC The brightness level range of the OPC sensor’ s automatic adjustments can be set according to your prefer ences. The adjustment range of the OPC sensor can be set to a maximum of k 16 and a minimum of l 16.
The TV will automatically enter the standby mode if no operations are performed during the time span you set (“30min.” or “3hr .”). • Five minutes before the TV enters standby mode, the remaining time displays every minute. When set to “Y es” the TV activates the following power saving mode.
Basic adjustment E Sort Channel positions can be sorted freely . Press c / d to select “Y es”, and then press OK . Press a / b / c / d to select the channel you want to move, and then press OK . Press a / b / c / d to move it to the desir ed position, and then press OK .
Basic adjustment Password/Par ental lock settings Child Lock Setup Allows you to use a PIN to protect certain settings fr om being accidentally changed. Change PIN Register a 4-digit password number to use the Child Lock function. Enter the 4-digit number as a PIN using 0 – 9 .
Useful V iewing functions WSS Setup WSS signal 4:3 screen Selecting the WSS picture size automatically 4:3 Mode Setup The WSS signal has 4:3 auto-switching that allows you to select between Panorama and Normal.
Y ou can use this menu to set the appropriate picture size for viewing a 16:9 format TV programme on a 4:3 TV . Selecting the recor ding picture size manually REC Pictur e Size Digital Setup Setting t.
Useful Viewing functions Display Settings Channel display Time Display Option Item On: Display the clock time. On (half-hourly): Display the clock time in 30 minutes increments. Off: Hide the clock time. Time Format Y ou can select the time format (either 24HR or AM/PM) for the clock time.
Other useful featur es Setting when using external devices Input Select Option Item EXT 1: Y/C, CVBS, RGB EXT 2: Y/C, CVBS, RGB EXT 3: Auto, S-VIDEO, VIDEO For setting the signal type of external equipment. Input source settings NOTE • If no (colour) image displays, try changing to another signal type.
Connecting a PC Connecting a PC NOTE • The PC input terminals are DDC1/2B-compatible. • Refer to page 36 for a list of PC signals compatible with the TV .
Connecting a PC Adjusting the PC image manually Ordinarily you can easily adjust the pictur e as necessary to change image position using Auto Sync. In some cases, however , manual adjustment is needed to optimise the image. Press a / b to select the specific adjustment item.
Connecting a PC C1 C2 C3 C4 P1 P2 P3 P4 RS-232C port specifications PC Control of the TV • When a programme is set, the TV can be contr olled from the PC using the RS-232C terminal. The input signal (PC/video) can be selected, the volume can be adjusted and various other adjustments and settings can be made, enabling automatic programmed playing.
Connecting a PC PC compatibility chart Resolution Horizontal Frequency V ertical Frequency Analogue (D- Sub) Digital (HDMI) VESA Standard VGA 640 g 480 31.5 kHz 60 Hz ✔✔✔ SVGA 800 g 600 37.9 kHz 60 Hz ✔✔✔ XGA 1024 g 768 48.4 kHz 60 Hz ✔✔✔ WXGA 1360 g 768 47.
Appendix T roubleshooting Problem Possible Solution • No power . • Check if you pressed B on the r emote control unit. If the indicator on the TV lights up r ed, press B . • Is the AC cord disconnected? • Check if you pressed a on the TV . • Unit cannot be operated.
Appendix Updating your TV via DVB-T T o ensure that your TV softwar e version is always up to date, from time to time SHARP will make updated TV base software and DVB softwar e available. Reset If complex adjustments are made so that the settings cannot be restor ed to normal, you can reset the settings to the factory preset values.
Appendix Specifications Item 42 o LCD COLOUR TV , Model: LC-42X20E, LC-42X20S 46 o LCD COLOUR TV , Model: LC-46X20E, LC-46X20S 52 o LCD COLOUR TV , Model: LC-52X20E, LC-52X20S LCD panel 42 o Advanced .
A. Information on Disposal for Users (private households) 1. In the European Union Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin! Used electrical and ele.
SPECIAL NOTE FOR USERS IN THE U.K. The mains lead of this product is fi tted with a non-rewir eable (moulded) plug incorporating a 13A fuse. Should the fuse need to be replaced, a BSI or AST A approved BS 1362 fuse marked or ASA and of the same rating as above, which is also indicated on the pin face of the plug, must be used.
LC-42X20E LC-42X20S LC-46X20E LC-46X20S LC-52X20E LC-52X20S LCD COLOUR TELEVISION LCD-F ARBFERNSEHGERÄT TÉLÉVISEUR COULEUR À ÉCRAN CRIST AUX LIQUIDES (LCD) TELEVISORE A COLORI LCD LCD-KLEURENTELE.
An important point after buying a device Sharp LC-52X20E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sharp LC-52X20E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sharp LC-52X20E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sharp LC-52X20E you will learn all the available features of the product, as well as information on its operation. The information that you get Sharp LC-52X20E will certainly help you make a decision on the purchase.
If you already are a holder of Sharp LC-52X20E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sharp LC-52X20E.
However, one of the most important roles played by the user manual is to help in solving problems with Sharp LC-52X20E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sharp LC-52X20E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
