Instruction/ maintenance manual of the product LC-52HD1E Sharp
Go to page of 64
LC-46HD1E LC-52HD1E LCD COLOUR TELEVISION LCD-F ARBFERNSEHGERÄT TÉLÉVISION COULEUR À ÉCRAN À CRIST AUX LIQUIDES (LCD) TELEVISORE A COLORI LCD ENGLISH DEUTSCH FRANÇAIS SHARP ELECTRÓNICA ESP AÑA S.
SPECIAL NOTE FOR USERS IN THE U.K. The mains lead of this product is fi tted with a non-rewir eable (moulded) plug incorporating a 13A fuse. Should the fuse need to be replaced, a BSI or AST A approved BS 1362 fuse marked or ASA and of the same rating as above, which is also indicated on the pin face of the plug, must be used.
OPERA TION MANUAL ENGLISH Contents .........................................................................................1 Dear SHARP customer .................................................................. 2 Important Safety Precautions .......
• “HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or r egistered trademarks of HDMI Licensing LLC.” Dear SHARP customer • Cleaning—Unplug the AC cord fr om the AC outlet before cleaning the product. Use a damp cloth to clean the pr oduct.
Supplied accessories Pr eparation Attaching the speaker unit • Before attaching (or detaching) the speaker unit, unplug the AC cor d from the AC INPUT terminal. • Before performing work spr ead cushioning over the base area to lay the TV on. This will prevent it fr om being damaged.
Attaching the stand unit • Before attaching (or detaching) the stand, unplug the AC cor d from the AC INPUT terminal. • Before performing work spr ead cushioning over the base area to lay the TV on. This will prevent it fr om being damaged. CAUTION • Attach the stand in the correct dir ection.
Setting the TV Preparation Antenna Connect the antenna cable from your antenna- /cable socket or the (room-/r oof) antenna for antenna input terminal on the back of your TV set to receive digitally/terr estrially broadcast stations. An indoor antenna can also be used under good reception conditions.
Preparation TV (Front view) TV (Rear view) 5 1 2 3 4 6 7 16 17 18 8 9 10 11 12 13 15 19 14 1 EXT 4 terminals * Do not connect S-VIDEO and VIDEO at the same time. 2 USB terminal 3 Headphones 4 COMMON INTERF ACE slot ( g 2) ** Remove the cover when inserting the CI Module.
Preparation Inserting the batteries Before using the TV for the first time, insert two “AAA” size batteries (supplied). When the batteries become depleted and the remote contr ol unit fails to operate, replace the batteries with new “AAA” size batteries.
Preparation Remote control unit NOTE • The symbols 8 , 9 and 0 indicate that the buttons become available in respective operating mode when using as a universal remote contr ol.
Initial installation Initial installation overview Follow the below steps one by one when using the TV for the first time. Some steps may not be necessary depending on your TV installation and connection.
Initial installation Initial installation wizard When the TV powers on for the first time after purchase, the initial auto installation wizar d appears.
Initial installation Positioning/aligning DVB-T antenna If you are r eceiving one or more DVB-T stations with picture and sound interfer ence then you should change the installation location and alignment of the antenna. Ask your dealer to tell you which channels are used to broadcast the DVB-T stations in your r egion.
Switching on/off T ur ning on/of f the power Press a on the TV . Switch it off by pr essing a on the TV . • However , please bear in mind that EPG data (electronic programme guide) will be lost, and pr ogrammed timer recor dings will not be performed by the TV .
With the favourites lists: Y ou can save and select your favourite stations in 6 favourites lists (e.g. for multiple users). Each favourites list can contain up to 99 stations. After initial installation, 10 stations from the station list ar e already stored in the first list.
Connecting exter nal devices The TV’ s integrated Connection wizard helps you connect new external devices and make cable changes. Before actually connecting the external device, run the Connection wizard and register the equipment to be connected. E Before connecting .
Connection wizard The integrated Connection wizard shows you which terminal you should connect your equipment to. Connect the equipment according to the diagram and follow the messages one after the other . NOTE • New devices should not be connected until they have been register ed in the connection wizard.
Connecting external devices HDMI connection The HDMI connections (High Definition Multimedia Interface) permit digital video and audio transmission via a connection cable from a player . The digital picture and sound data ar e transmitted without data compression and ther efore lose none of their quality .
Connecting external devices Audio connection Analogue audio: Connect the analogue audio signal from the PC or the SetT opBox via stereo cable to the AUDIO IN (L/R) jack on the TV set. • The sound is played via the speakers connected to the TV set or a speaker system.
Connecting external devices PC compatibility chart Resolution Horizontal Frequency V ertical Frequency Analogue (D- Sub) Digital (HDMI) VESA Standard VGA 640 g 480 31.5 kHz 60 Hz ✔✔ g SVGA 800 g 600 37.9 kHz 60 Hz ✔✔ g XGA 1024 g 768 48.4 kHz 60 Hz ✔✔ g SXGA 1280 g 1024 64.
Connecting external devices Connecting H DMI device to TV Controlling HDMI devices using AQUOS LINK What is AQUOS LINK? Using the HDMI CEC (Consumer Electronics Contr ol) protocol, with AQUOS LINK you can interactively operate compatible system devices (A V amplifier , DVD, Blu-ray Disc device) using a single remote contr ol.
Connecting external devices AQUOS LINK setup E AQUOS LINK Auto power on If this is activated, the One T ouch Play function is enabled. While the TV is in standby mode, it automatically turns on and plays back the image from the HDMI sour ce. Press MENU and the TV menu scr een displays.
Connecting external devices Operating an AQUOS LINK device AQUOS LINK allows you to operate the HDMI- connected device with one remote contr ol. NOTE • The AQUOS LINK buttons such as B , REV G , PLA Y I , FWD J , STOP H inside the flip cover should not be confused with the buttons used for HDD operation.
Using A V Link function This TV incorporates four typical A V Link functions for smooth connections between the TV and other audiovisual equipment. One T ouch Play While the TV is in standby mode, it automatically turns on and plays back the image from the audiovisual source (e.
Other featur es Picture in Pictur e (PIP) Using the PIP menu Here you can set the PIP type (split scr een or small picture) and the position of the small pictur e. Press PIP to activate the PIP scr een. Make sure the pictur e you want to operate is surrounded in a gr een frame.
Other features Using PhotoViewer This TV is equipped with PhotoViewer , allowing you to view pictures in the standar d JPEG format via a USB stick or a memory card in a car d reader .
W atching Slide show Starting Slide show Press I to start/resume Slide show . NOTE • If no pictures is selected for Slide show , all the pictures in the memory device are played in Slide show . While Slide show is in progr ess (or paused), you can: ✔ Press OK to display Photo Overview .
Other features EPG (Electronic Pr ogramme Guide) EPG stands for Electronic Pr ogramme Guide and provides you with on-scr een programme details. W ith this system, as with a printed programme guide, you can learn about the current programme.
Other features Using EPG menu Press EPG . Press MENU . EPG menu Station selection Data capture on (for DVB + analogue) Items Description Select provider In analogue TV reception, ther e are possibly differ ent providers who br oadcast the EPG data for certain station packages.
Conditional Access Module (CI Module) In order to r eceive coded digital stations, a Conditional Access Module (CI Module) and a CA Card must be inserted in the CI slot of your TV set. (Page 6) The CI Module and the CA Card ar e not supplied accessories.
W atching DVB broadcasts Software update TV base software and DVB softwar e T o ensure that your TV set is always up to date, fr om time to time SHARP will make updated TV base software and DVB softwar e versions available. These updates are br oadcast via satellite (only via ASTRA1).
W atching DVB broadcasts Radio mode Y ou can only receive radio stations via DVB. If you do not have DVB radio reception then you can play audio from an external device via the TV set using the audio/A V inputs. Press RADIO to activate the DVB radio mode.
Info display and index feature We have designed the TV with integrated content- based information text for each item so that you do not have to worry about reading the operation manual each time. In conjunction with the index feature, this makes a convenient control system.
Sound menu V arious sound-related settings can be optimised. Sound TV menu DYNAMIC Treble Bass Loudness Dolby Virtual Speaker Auto volume 0 0 off on off off Balance 0 AV output signal Sound 1+2 Headph.
Recording menu Y ou can set timer programmed recor dings with the integrated HDD Digital Recorder or other connected recor ding devices. Further information on HDD recor ding is provided in the chapter “ HDD Digital Recorder operation ”.
E Manual Y ou may enter the necessary information for recording manually . Select “Manual” instead of “Via EPG” in step 4 in Via EPG . • The station selection screen displays. • Y ou may be routed to the “Time and date” entry screen if the TV does not r ecognise the current time.
Connections menu Use this menu when connecting recor ders, DVD recor der , etc. There is a wizar d which will guide you through the individual steps. TV menu AV setup Sound components Antenna DVB AV-L.
Menu operation Setup menu Y ou can search for stations automatically or manually as well as set the menu language, timer functions, child lock, etc. Setup Εxtended functions Picture Sound TV menu AQU.
Menu operation E Manual tune Use the manual tune option when receiving TV signals whose TV/Colour standard deviate fr om the one specified. However , this requires detailed knowledge. E Change stations Y ou can move stations, enter or change station names, and delete stations.
Menu operation Geometry menu In this menu you can set the geometry values of your connected PC. First connect PC to EXT7 (ANALOG RGB) or to EXT5/6 using HDMI/DVI conversion cable.
Wide modes Y ou can select the picture size. Selectable picture size varies with the type of signal received. Basically , if you set Auto format to “on” in the Setup menu, the optimum Wide mode is automatically chosen for every broadcast. Y ou can however , change the screen format manually as explained below .
Menu operation Using teletext menu While in the teletext mode, press MENU to display the T eletext menu. Newsflash Reveal Recording wizard Setup Teletext menu Items Newsflash Reveal/Conceal Recording .
Important information Hard disk (HDD) This TV set recor ds programmes onto a hard disk drive (HDD). The hard disk is equipped with a safety mechanism to protect data fr om impact, vibration and dust. However , to prevent loss of recor ded data, you should be particularly careful of the following points: • Do not subject the TV set to any impact.
Features About the Digital Recorder system Y our SHARP TV set is equipped with a Digital Recorder that includes a hard disk. Y ou can use this to recor d and playback picture and sound fr om TV programmes, like with a VCR or DVD recor der . HDTV programmes can also be recor ded and played back.
About time shift viewing and archive r ecording/playback HDD Digital Recorder operation 43 Always recor ding... Storing time shift r ecording into an ar chive: Y ou can convert the programme you are curr ently recor ding with a time shift into an archive.
Navigating the Digital recor der menu Y ou can use the Digital Recorder with the default values set at the factory . This section explains how to customise these values to meet your own prefer ence. T o change the settings, first call the Digital Recorder menu scr een as explained below .
HDD Digital Recorder operation Recording with the HDD Time shift recor ding and archive recor ding There ar e 2 ways of recording a TV pr ogramme with the HDD. One is Time shift recording and the other is Archive r ecording. E Time shift recor ding The TV automatically recor ds the programme currently tuned in.
Recording Press E . • If time shift is enabled this operation initiates the conversion of time shifted recor ding into the archive. current programme 30 60 90 120 180 Recording duration (min.
Timer recor ding Y ou can programme the timer using the EPG, teletext or manually . Y ou can programme up to 50 timer r ecordings. If you have programmed timer r ecordings, the TV set may only be switched off into the stand-by mode.
HDD Digital Recorder operation E Deleting programmed timer entries In the TV mode, press MENU to display the TV menu. Select “Recording” with c / d and pr ess b to move down. Select “Timer list” with a / b , and then press OK . Select the entry to delete with a / b .
HDD Digital Recorder operation E Fast forward and r ewind Y ou can fast forward and rewind at 3 dif ferent speeds during time shifted TV viewing or archive playback. No sound is audible during winding. (When viewing HDTV , rewind is not possible.) Press Fast Forwar d J or Rewind G briefly .
HDD Digital Recorder operation E Copying recor dings to an external device This is simple with a VCR or DVD recor der equipped with A V Link. Press RED to display the DR ar chive menu. Press YELLOW (Delete/copy). 31.08. Das Erste da capo 14.09 Phoenix Bon(n) jour Berlin 29.
HDD Digital Recorder operation Bookmark For example, you want to flag interesting scenes and goals of sports programmes in or der to watch them again when playing the recor ding. Y ou can set bookmarks while you are watching the live pictur e with time shift, while recor ding into the archive or playing from the ar chive.
Appendix T roubleshooting Problem Possible Solution • No power . • Check if you pressed B on the r emote control unit. If the indicator on the TV lights up red, press B . • Is the AC cord disconnected? • Check if you pressed a on the TV . • Unit cannot be operated.
C1 C2 C3 C4 P1 P2 P3 P4 00 5 5 10 0 –3 0 0009 0 ???? ? OK ER R RS-232C port specifications PC Control of the TV • When a programme is set, the TV can be contr olled from the PC using the RS-232C terminal.
CONTROL ITEM COMMAND P ARAMETER CONTROL CONTENTS POWER SETTING P O W R 0 _ _ _ POWER OFF INPUT SELECTION A I T V D _ _ _ _ TV (CHANNEL FIXED) I A V D * _ _ _ EXT1 – 7 (1 – 7) I A V D ? ? ? ? 1 to .
Appendix Using the universal remote contr ol Y ou can operate the connected A V products (DVD player/recor der , SetT opBox, VCR and others) by setting up your remote contr ol as a universal remote control unit. NOTE • Some manufacturer code indicated in the operational manual and the universal remote contr ol device do not correspond.
Appendix DVD Manufacturer Code United 001 Voxson 001 Vtrek 159 Wharfedale 104 105 130 Wintel 152 Xbox 167 Xlogic 105 XMS 149 Y akumo 109 Y amada 109 Y amaha 006 013 123 137 164 230 Y amakawa 103 146 Y.
Appendix VCR Manufacturer Code Sony 003 004 013 022 027 044 066 068 082 083 084 085 088 094 096 097 103 113 116 117 118 119 145 146 147 160 168 184 185 186 Soundwave 059 Standard 021 061 Starlite 059 .
Appendix Satellite Manufacturer Code Pye 051 Quadral 049 056 066 080 086 088 094 096 161 311 341 342 343 344 003 039 105 106 Quelle 044 053 079 001 040 Radiola 077 001 139 Radix 009 060 089 097 116 20.
Appendix Specifications Item 46 o LCD COLOUR TV , Model: LC-46HD1E 52 o LCD COLOUR TV , Model: LC-52HD1E LCD panel 46 o Advanced Super View & BLACK TFT LCD 52 o Advanced Super V iew & BLACK TFT LCD Number of dots 6,220,800 dots (1920 g 1080 g 3 dots) Video Colour System P AL/SECAM/NTSC 3.
A. Information on Disposal for Users (private households) 1. In the European Union Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin! Used electrical and ele.
SPECIAL NOTE FOR USERS IN THE U.K. The mains lead of this product is fi tted with a non-rewir eable (moulded) plug incorporating a 13A fuse. Should the fuse need to be replaced, a BSI or AST A approved BS 1362 fuse marked or ASA and of the same rating as above, which is also indicated on the pin face of the plug, must be used.
LC-46HD1E LC-52HD1E LCD COLOUR TELEVISION LCD-F ARBFERNSEHGERÄT TÉLÉVISION COULEUR À ÉCRAN À CRIST AUX LIQUIDES (LCD) TELEVISORE A COLORI LCD ENGLISH DEUTSCH FRANÇAIS SHARP ELECTRÓNICA ESP AÑA S.
An important point after buying a device Sharp LC-52HD1E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sharp LC-52HD1E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sharp LC-52HD1E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sharp LC-52HD1E you will learn all the available features of the product, as well as information on its operation. The information that you get Sharp LC-52HD1E will certainly help you make a decision on the purchase.
If you already are a holder of Sharp LC-52HD1E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sharp LC-52HD1E.
However, one of the most important roles played by the user manual is to help in solving problems with Sharp LC-52HD1E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sharp LC-52HD1E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
