Instruction/ maintenance manual of the product LC-46LB700X Sharp
Go to page of 104
MODEL LC-46LB700X LCD COLOUR TELEVISION OPERA TION MANUAL Cover_LC-46LB700X.indd 1 Cover_LC-46LB700X.indd 1 12/2/2009 8:48:34 AM 12/2/2009 8:48:34 AM.
Cover_LC-46LB700X.indd 2 Cover_LC-46LB700X.indd 2 12/2/2009 8:48:35 AM 12/2/2009 8:48:35 AM.
1 OPERATION MANUAL Dear SHARP customer Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Precautions carefully before using this product.
2 Contents Watching TV (Continued) Programme title display ................................................................................................. 31 Key lock ..................................................................................
3 Contents Disc Playback Loading a Disc ............................................................................................................................. 56 Removing a Disc ..................................................................
4 Contents Connecting a PC HDMI Connection ........................................................................................................................ 77 Analogue Connection ................................................................
5 Important Safety Precautions • Cleaning — Unplug the AC cord from the AC outlet before cleaning the product. Use a soft damp cloth to clean the product. Do not use liquid cleaners, aerosol cleaners or chemical cloth to clean it, as such materials may damage the product.
Supplied accessories Stand base Short screws ( g 4) Long screws ( g 4) Stand post Make sure the following accessories are provided with the product. Remote control unit “AAA” size battery ( g 2) AC cord Used with batteries inserted. Always use the AC cord supplied with the TV.
7 Preparation Attaching the stand • Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal. • Before performing work, spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
8 Preparation Part names TV (Front/Side) Remote control sensor Power indicator** OPC sensor OPC indicator* Blue illumination Emblem*** *1 *2 Disc slot POWER (On/Off) button MENU button TV/VIDEO button.
9 Preparation TV (Rear) *2 *1 *3 *1 NOTE *1 See pages 14 and 15 for external equipment connection. *2 The Disc Drive has an ETHERNET terminal. You will be able to enjoy additional contents by downloading them via the Internet. (For the BD-VIDEO discs compatible with BD-LIVE.
10 Preparation Remote control unit 13 1 2 11 12 14 15 16 17 23 22 18 21 20 19 3 4 5 6 7 10 9 8 24 25 29 31 28 27 30 26 1 POWER (STANDBY/ON): To switch the power on and off. (See page 18.) 2 0 – 9: Set the channel. (See page 23.) TELETEXT mode: Set the page.
Preparation 11 Before turning on the power Notes on installing the TV • Avoid direct sunlight and place the TV in a well-ventilated location. • Place the TV in a level location. • Do not turn on the power of the TV before connecting the AC cord.
Preparation Supplying electric power to the antenna When you set-up the DTV antenna for the fi rst time, or connect the antenna to a community antenna, you need to proceed to set the antenna by following this manual. 1 Press DTV to access DTV mode. 2 Press MENU and the MENU screen displays.
Checking signal strength and channel strength If you install a DVB-T antenna for the fi rst time or relocate it, you should adjust the alignment of the antenna to receive a good reception while checking the antenna setup screen. 1 Press MENU and the MENU screen displays.
14 Preparation Connecting external devices You can connect many types of external equipment to your TV, like a VCR, game console, camcorder, DVD player, Digital TV STB (Set Top Box) and PC. To view input source images, select the input source from TV/VIDEO on the remote control unit or TV/VIDEO on the TV.
15 Preparation Connecting a STB (Satellite, Cable, etc.) You can use the INPUT 1/INPUT 2/ INPUT 3 (HDMI) or INPUT 4/INPUT 6 terminals when connecting to a STB (Satellite, Cable, etc.
16 Preparation Connecting to the ETHERNET terminal • You can enjoy a variety of contents with interactive functions by connecting to the internet when playing BD- LIVE compatible discs. Refer to pages 59 and 65 regarding further information on BD-LIVE functions.
17 Preparation Inserting the batteries Before using the TV for the fi rst time, insert two “AAA” size batteries (supplied). When the batteries become depleted and the remote control fails to operate, replace the batteries with new “AAA” size batteries.
18 Preparation Turning the TV on/off Turning on the power Press POWER on the TV. • POWER indicator (Green): The TV is on. (After a few seconds, an image appears with sound.) • After turning the power “ON” by pressing POWER on the TV, you can turn the power ON/OFF by pressing POWER on the remote control.
19 Preparation H Using the control panel of the TV You can also operate the Menu using the control panel of the TV. Button operations on the control panel correspond to the ones on the remote control as shown below.
20 Preparation Picture OPC .............................................................................. Page 36 Backlight ..................................................................... Page 36 Contrast ........................................
21 Preparation Picture OPC .............................................................................. Page 36 Backlight ..................................................................... Page 36 Contrast ........................................
22 Watching TV Setting channels automatically You can run auto installation again, even after setting up the preset channels. 1 Press MENU and the MENU screen displays. 2 Press c / d to select “Setup”. 3 Press a / b to select “Auto Installation”, and then press ENTER .
23 Watching TV Selecting programmes You can change channels in several ways. Using CH r / s on the remote contr ol unit • Press CH r to increase the channel number. • Press CH s to decrease the channel number. NOTE • CH r / s on the TV operates the same as CH r / s on the remote control unit.
24 Watching TV Setting channels to your preference You can run the auto search procedure again at any time by accessing the Setup menu and Programme setup. Channels can be tuned automatically or manually. Digital Settings You can reconfi gure DTV services settings automatically or manually.
25 Watching TV Manual setting for each channel (Analogue) You can set some channel items manually. They are Search, Fine (TV frequency), Colour sys., Sound sys., Label (Network name), Skip and Lock (Child Lock). 1 Press MENU and the MENU screen displays.
26 Watching TV Manual setting for each channel (continued) Sound system (Broadcasting system) 1 Press a / b / c / d to select the channel you want to edit, and then press ENTER . • The selected channel information displays. 2 Press a / b to select “Sound sys.
27 Watching TV Sorting programmes Channel positions can be sorted freely. 1 Press MENU and the MENU screen displays. 2 Press c / d to select “Setup”. 3 Press a / b to select “Programme setup”, and then press ENTER . If you have already set the password, enter it here.
28 Watching TV Useful viewing functions Returning to the previously selected channel Press A to switch the currently tuned channel to the previously tuned channel. Press A again to switch back to the currently tuned channel. Press A to toggle between the currently selected input source and the previously selected one.
29 Watching TV Switching the analogue audio format You can switch between multiple audio modes when watching a multiple audio or stereo broadcast programme. In the NICAM TV broadcasts When receiving a stereo signal Each time you press MPX , the mode switches between NICAM STEREO and MONO.
30 Watching TV Password setting for the child lock (for TV input mode) Allows you to use a password to protect certain settings from being accidentally changed. Setting a password Register a 4-digit password number to use the Child Lock function. 1 Press MENU and the MENU screen displays.
31 Watching TV Parental rate This function allows TV channels to be restricted. It prevents children from watching violent or sexual scenes that may be considered inappropriate. 1 Repeat steps 1 to 3 in Setting a password . 2 Press a / b to select “Parental rating”, and then press ENTER .
32 Watching TV Energy conservation settings Auto power-off at a designated time This function is conveniently used when, for instance, going to bed while watching TV. 1 Press SLEEP . • Remaining time displays when sleep timer has been set. Sleep Timer: Remain 2 hr .
33 Watching TV Auto power-off after the end of broadcast You can set the TV to automatically power off in about 15 minutes after the TV goes into a state of receiving no programme signals, such as the end of a broadcast day. 1 Press MENU and the MENU screen displays.
34 Watching TV Selected item Description Normal For 4:3 “standard” pictures. A side bar appears on each side. Zoom 14:9 For 14:9 letterbox pictures. A thin side bar appears on each side, and you may also see bars on the top and bottom with some programmes.
35 Watching TV Selecting a preset AV MODE The AV MODE function enables you to select appropriate settings for audio and video to account for the system environment which can vary due to factors like room brightness, type of programme watched or the type of image input from external equipment.
36 Watching TV Manual picture settings Picture adjustment You can adjust the picture to your preference. Follow the steps to adjust the picture. 1 Press MENU and the MENU screen displays.
37 Watching TV H Film Mode Automatically detects a fi lm-based source (originally encoded at 24/25 frames/second, depending on the vertical frequency), analyses it then recreates each still fi lm frame for high-defi nition picture quality. Selected item Description Advanced (High) Display moving picture more smoothly with high quality.
38 Watching TV H Range of OPC The brightness level range of the OPC sensor’s automatic adjustments can be set according to your preferences. The adjustment range of the OPC sensor can be set to a maximum of +16 and a minimum of -16. Selected item Description Max.
39 Watching TV Indicating time on the screen H Time display This function allows you to display the clock time on the lower right screen. 1 Press MENU and the MENU screen displays. 2 Press c / d to select “Option”. 3 Press a / b to select “Time display” and then press ENTER .
40 Watching TV Audio adjustment You can adjust the audio of the selected AV mode. 1 Press MENU and the MENU screen displays. 2 Press c / d to select “Audio”. MENU [ Audio ] Audio ECO T reble Bass Balance SRS TS HD Bass enhancer Reset [Off] [On] [ 0] [ 0] –15 L +15 [ 0] –15 +15 R DYNAMIC 3 Press a / b to select the desired menu item.
41 Watching TV Automatic volume adjustment Different sound sources sometimes do not have the same volume level, such as a programme and its commercial breaks. The Automatic volume control (Auto volume) reduces this problem by equalizing levels. 1 Press MENU and the MENU screen displays.
42 Watching TV Using Digital Audio Output It is possible to output audio through the DIGITAL AUDIO OUTPUT terminal. PCM audio outputs from the terminal. NOTE • The DIGITAL AUDIO OUTPUT terminal usually outputs the same audio from the speakers. (The audio of the content you are viewing is output from the terminal.
43 Watching TV ATV (Analogue)/DTV/RADIO buttons Use the following buttons on the remote control to operate the menu. ATV: Press to switch to ATV (Analogue TV) mode. After switching from DTV, radio or external input mode to analogue mode, the TV jumps to the most recently viewed analogue channel.
44 Watching TV EPG What is an EPG? An “EPG (Electronic Programme Guide)” is a programme schedule, which is displayed on the TV screen. The EPG is broadcasted together with DTV. The TV screen shows the EPG when the viewer presses EPG on the remote control, provided that the TV is receiving the digital broadcasting signal.
45 Watching TV Selecting a programme using EPG Basic Operation H Display the EPG screen Press EPG . EPG [DTV-TV] 002 9:23 – 9:29 ABC TV Sydney Global Grover 9 10 11 12 13 14 TEN Digital ABC TV Sydne.
46 Watching TV 4 Search a pr ogramme in a category 1 Press G . 2 Press a / b to select the desired genre, and then press ENTER . 3 Press a / b to select a programme you want to watch, and then press ENTER .
47 Watching TV Timer setting using EPG You can select TV programmes using data from the EPG. 1 Press EPG . 2 Press a / b / c / d to select the programme you want to set, and then press ENTER . 3 Press c / d to select the timer setting, and then press ENTER .
48 Settings when using external devices Settings when using HDMI output devices HDMI terminals can carry audio and visual signals to the TV with an HDMI certifi ed cable. When you want to output the audio and picture from an HDMI output device on the TV, select “INPUT1”, “INPUT2” or “INPUT3” by switching the input source.
49 Settings when using external devices Selecting the input source and signal type Selecting input source Can use for selecting the input source. Using TV/VIDEO on the remote control unit or on the TV. TV/VIDEO allows you to choose from the available input sources.
50 Settings when using external devices Skipping HDMI/RGB input This setting allows you to skip the HDMI or RGB input on the input source selection operation. 1 Press MENU and the MENU screen displays. 2 Press c / d to select “Setup”. 3 Press a / b to select “Input skip”, and then press ENTER .
51 Settings when using external devices Setting display colour You can change the background colour of the OSD (menu screen), channel display and programme information, etc. to the blue, gray, red or green. 1 Press MENU and the MENU screen displays. 2 Press c / d to select “Option”.
52 Blu-ray Disc Blu-ray disc is the ultimate next generation optical media format, offering the following key features: • Largest capacity (25 GB single layer – 50 GB dual layer) – with over 5 t.
53 About Discs BD-VIDEO • Enjoy Final Standard Profi le functions (see page 59), such as picture-in-picture. The available functions differ depending on the disc. This is a new function of BD-VIDEO that plays the primary video and secondary video simultaneously.
54 About Discs Icons Used on DVD-VIDEO Disc Cases The back of the case of a DVD that is commercially available usually contains various information about the contents of the disc.
55 W ar nings about dew formation • Condensation may form on pick up lens or disc in the following conditions: – Immediately after a heater has been turned on. – In a steamy or very humid room. – When the TV is suddenly moved from a cold environment to a warm one.
56 Disc Playback This section explains playback of commercially available BD-VIDEO and DVD-VIDEO discs (like movies), CDs, and recorded DVD-RW/R discs. Loading a Disc Insert the disc into the disc slot. • The label side of the disc must face towards the front of the TV (towards you).
57 Disc Playback BD/DVD-VIDEO Playback BD-VIDEO DVD-VIDEO BD-RE BD-R 1 Load a disc. • Playback may begin automatically, depending on the disc. 2 Press d . • Playback begins from the fi rst title. • The menu may be displayed fi rst, depending on the disc.
58 Disc Playback Using the Disc Menu DVD-VIDEO Example: Select “SUBTITLE LANGUAGE”. 1 Press TOP MENU . • The disc menu screen is displayed. 2 Press a / b to select “SUBTITLE LANGUAGE”, and then press ENTER . • The screen for selecting the subtitle language is displayed.
59 Use of Picture in Picture Function (Secondary Audio/Video Playback) BD-VIDEO BD-VIDEO that includes secondary audio and video compatible with Picture in Picture can be played back with secondary audio and video simultaneously as a small video in the corner.
60 Disc Playback Audio CD Playback AUDIO CD Playback from the Beginning 1 Load an audio CD. • Playback may begin automatically, depending on the disc. • Press d . • Playback begins from the fi rst track. 2 Press H to stop playback. Selecting a Track for Playback 1 Load an audio CD, and then press DISC MENU .
61 Repeat Playback of a Title or Chapter (Repeat Playback) 1 Play back the title or chapter you want to repeat. 2 Press DISC MENU . • The DISC MENU control screen is displayed. BD-VIDEO 2 English 1 Off 00 : 20 : 30 1 1/3 5.1 c h Return Select Enter 5/2 5 RETURN ENTER 3 Press a / b to select “ ”, and then press ENTER .
62 Disc Playback Partial Repeat Playback (Repeat Playback of a Specifi ed Part) DVD-VIDEO DVD-R DVD-RW AUDIO CD NOTE • Some operations in the following playback function cannot be performed depending on the specifi cations of the disc. 1 Press DISC MENU during playback.
63 Settings During Playback DISC MENU Control This allows you to adjust various settings at once, like subtitles, angle settings and the title selection for Direct Playback. You can adjust the video and audio to suit your preferences. The operations are the same for BD and DVD.
64 Disc Playback DISC MENU Operation Procedure 1 Press DISC MENU during playback. • The DISC MENU control screen is displayed. 2 Press a / b to select the desired setting, and then press ENTER . • For a description of each setting, see “DISC MENU Which Can Be Set”.
65 Playback Setting H Parental Control This lets you set the Parental Control depending on the disc content. The available Parental Control Levels are shown below. The 4-digit PIN code number needs to be entered before the Parental Control Levels and the Country Code are set.
66 Blu-ray disc Setup Communication Setup This allows you to perform and/or change the communication setting. This setting is required to use BD-LIVE functions that connect to the internet. NOTE • Make sure that the ETHERNET cable is connected to this TV.
67 Blu-ray disc Setup Communication Setup (continued) 12 For the advanced setting (the setting of the Ethernet connection speeds), press c / d to select “Yes” or “No”, then press ENTER . • Normally select “No”, then press ENTER . (Go to the step 14.
68 Blu-ray disc Setup Selected by pressing a / b Selected by pressing c / d 3 Press c / d to select a number/character, then press ENTER . 4 Repeat the step 3 to display all of the desired characters/numbers in the input fi eld. Example : The screen for inputting numeric characters 123 Numeric 123 4 567 890 Edit NOTE • Press RETURN (Del.
69 Blu-ray disc Setup Country Code List USA / CANADA / JAPAN / GERMANY / FRANCE / UK / ITALY / SPAIN / SWISS / SWEDEN / HOLLAND / NORWAY / DENMARK / FINLAND / BELGIUM / HONG KONG / SINGAPORE / THAILAN.
70 Blu-ray disc Setup 5 Press a / b to select “Erase” or “Format”, and then press ENTER . Erase: Deletes only BD-VIDEO data contents. Format: Deletes all contents. Erase Erases BD-VIDEO data on USB memory. Erase all contents on USB memory including protected contents.
71 Blu-ray disc Setup • If the USB memory device is not properly installed or the correct update fi le cannot be found on the USB memory device, an error message is displayed. Check the fi le on the USB memory device, and then reinsert the USB memory device correctly.
72 AQUOS LINK Controlling HDMI devices using AQUOS LINK What is AQUOS LINK? Using the HDMI CEC protocol, with AQUOS LINK you can interactively operate compatible system devices (AV amplifi er, DVD player/recorder, Blu-ray player/ recorder) using a single remote control unit.
73 AQUOS LINK AQUOS LINK connection First connect the AQUOS AUDIO speaker system or an AQUOS BD Player/AQUOS Recorder that supports the HDMI CEC protocol.
74 AQUOS LINK Auto power on If this is activated, the One Touch Play function is enabled. While the TV is in standby mode, it automatically turns on and plays back the image from the HDMI source. 1 Repeat steps 1 to 3 in AQUOS LINK control . 2 Press a / b to select “Auto power on”, and then press ENTER .
75 AQUOS LINK Listening with the AQUOS AUDIO speaker system You can choose to listen to the TV sound only from the AQUOS AUDIO speaker system. 1 Open the remote control unit’s fl ip cover, and then press OPTION . 2 Press a / b to select “By AQUOS AUDIO SP”, and then press ENTER .
76 AQUOS LINK Selecting media type for CEC-compatible recorder If your recorder has multiple storage media, select the media type here. 1 Open the remote control unit’s fl ip cover, and then press OPTION . 2 Press a / b to select “Media change”, and then press ENTER .
77 Connecting a PC Use the PC terminals to connect a PC. HDMI Connection * When using the INPUT 1 terminal, you must select the proper item in the “PC audio select” menu depending on the type of HDMI cable connected. (See page 78.) NOTE • The PC INPUT terminals are DDC1/2B-compatible.
78 Connecting a PC PC audio select When using the INPUT 7 terminal or INPUT 1 terminal, you must select which terminal uses the AUDIO (R/L) jack for analogue audio input.
79 Connecting a PC Adjusting the PC image automatically This function enables the screen to be automatically adjusted to its best possible condition when the analogue terminals of the TV and PC are connected with a commercially available DVI/D-sub conversion cable, etc.
80 Connecting a PC PC Control of the TV • When a programme is set, the TV can be controlled from the PC using the RS-232C terminal. The input signal (PC/video) can be selected, the volume can be adjusted and various other adjustments and settings can be made, enabling automatic programmed playing.
81 Connecting a PC PC compatibility chart Resolution Horizontal Frequency V ertical Frequency Analogue (D-Sub) Digital (HDMI) VESA Standard VGA 640 g 480 31.5 kHz 60 Hz ✔✔ ✔ SVGA 800 g 600 37.9 kHz 60 Hz ✔✔ ✔ XGA 1024 g 768 48.4 kHz 60 Hz ✔✔ ✔ WXGA 1360 g 768 47.
82 Teletext function About Teletext What is Teletext? Teletext broadcasts pages of information and entertainment to specially equipped television sets. Your TV receives Teletext signals broadcast by a TV network, and decodes them into graphical format for viewing.
83 Teletext function Teletext language setting If Teletext information does not display correctly, perform the procedure below. Select from among 4 kinds of language tables: West Europe, East Europe, Greek/Turkish, Cyrillic. Each table is compatible with the Teletext languages listed below.
84 Teletext function Displaying Subtitles You can display subtitles as they are transmitted. 1 Press [ to display the subtitle. • Subtitle is updated by information sent by the broadcasting station. 2 Press [ to exit the subtitle screen. NOTE • Subtitle will not be displayed when the service does not contain subtitle information.
Troubleshooting The problems described below are not always caused by malfunctions. Check the TV again before having the TV serviced. Problem Possible Solution • No power. • Check if you pressed POWER on the remote control unit. (See page 18.) If the indicator on the TV lights up red, press POWER .
Troubleshooting-Disc Playback Problem Possible Solution • No picture. • Take out the disc and clean it. • Video stops. • Has the TV been subjected to shock or impact? Are you using it in an unstable location? The TV will stop if it senses shock or vibration.
Troubleshooting-Disc Playback (continued) Problem Possible Solution • Still image playback or frame advance playback does not work properly. • Frame advance playback on discs other than DVD-RW/R (VR format) may not work properly.
Troubleshooting-Network Problem Possible causes and solutions • Cannot connect to the Internet. • Is the ETHERNET cable connected properly? • Is the wrong cable such as a modular cable used? Connect a ETHERNET cable to the ETHERNET terminal.
89 Error messages about recording using AQUOS LINK The example of an error message displayed on a screen Error code Possible Solution Failed to record Cannot record the broadcast. S05 Check the content (broadcast or programme) or the recording medium such as HDD or DVD.
90 Appendix Reset If complex adjustments are made and the settings cannot be restored to normal, you can reset the settings to the factory preset values. 1 Press MENU and the MENU screen displays. 2 Press c / d to select “Setup”. 3 Press a / b to select “Reset”, and then press ENTER .
91 Appendix Specifi cations Item Model LC-46LB700X LCD panel 46 o (1170 mm) Advanced Super View & BLACK TFT LCD Resolution 2,073,600 pixels (1920 g 1080) Video Colour System PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60 TV Function TV- Standard Analogue PAL: B/G, D/K, I SECAM: B/G, D/K, K/K 1 Digital DVB-T Receiving Channel VHF/UHF 44.
Appendix 92 Dimensional drawings Unit: mm 103.5 52.5 142.5 357 741 688 400 174.5 400 1023.5 575.5 470 241 1100 418 LC46LB700X_EN.indb 92 LC46LB700X_EN.
Appendix Mounting the TV on the wall Removing the stand For wall mounting with the optional bracket (AN-52AG4), remove the stand. Before detaching/attaching the stand • Before detaching (or attaching) the stand, unplug the AC cord from the AC outlet.
94 Appendix Handling and precautions with the wall-mounted TV • You can mount the TV on the wall using the optional AN-52AG4 bracket. • For details, refer to the instructions supplied with the optional bracket. CAUTION • This TV should be mounted on the wall only with the AN-52AG4 (SHARP) wall mount bracket.
95 Appendix CAUTION • As this product is heavy, use a table that is wide enough to support the product and capable of withstanding the product’s weight. The table should be set where it will not be overturned. Protection against overturning There is a danger of the product overturning in the case of a disaster or sudden collision.
Appendix The Password is . NOTE • As a precautionary measure, make a note of your password and PIN code above, remove it from this manual, and keep it in a familiar place. CLEARING THE PASSWORD If you forget the password, clear the password using the following procedure.
Appendix 97 Information on the software license for this product Software composition The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by third parties.
Memo LC46LB700X_EN.indb 98 LC46LB700X_EN.indb 98 12/2/2009 8:49:57 AM 12/2/2009 8:49:57 AM.
Memo LC46LB700X_EN.indb 99 LC46LB700X_EN.indb 99 12/2/2009 8:49:57 AM 12/2/2009 8:49:57 AM.
Memo LC46LB700X_EN.indb 100 LC46LB700X_EN.indb 100 12/2/2009 8:49:57 AM 12/2/2009 8:49:57 AM.
LC46LB700X_EN.indb 101 LC46LB700X_EN.indb 101 12/2/2009 8:49:57 AM 12/2/2009 8:49:57 AM.
Printed in Malaysia TINS-E519WJZZ 10P01-MA-NP LC46LB700X_EN.indb 102 LC46LB700X_EN.indb 102 12/2/2009 8:49:57 AM 12/2/2009 8:49:57 AM.
An important point after buying a device Sharp LC-46LB700X (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sharp LC-46LB700X yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sharp LC-46LB700X - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sharp LC-46LB700X you will learn all the available features of the product, as well as information on its operation. The information that you get Sharp LC-46LB700X will certainly help you make a decision on the purchase.
If you already are a holder of Sharp LC-46LB700X, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sharp LC-46LB700X.
However, one of the most important roles played by the user manual is to help in solving problems with Sharp LC-46LB700X. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sharp LC-46LB700X along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
