Instruction/ maintenance manual of the product LC-40LE820E Sharp
Go to page of 64
LC-40LE820E LC-40LE810E LC-46LE820E LC-46LE810E LC-52LE820E LCD COLOUR TELEVISION LCD-F ARBFERNSEHGERÄT TÉLÉVISEUR COULEUR À ÉCRAN CRIST AUX LIQUIDES (LCD) TELEVISORE A COLORI LCD LCD-KLEURENTELE.
SPECIAL NOTE FOR USERS IN THE U.K. The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 13A fuse. Should the fuse need to be replaced, a BSI or AST A approved BS 1362 fuse marked or ASA and of the same rating as above, which is also indicated on the pin face of the plug, must be used.
1 OPERA TION MANUAL ENGLISH The illustrations and the OSD in this operation manual are for explanation purposes and may vary slightly from the actual operations. The examples used throughout this manual are based on the LC-46LE820E model. Dear SHARP customer Thank you for your purchase of the SHARP LCD colour TV product.
2 Important safety precautions Cleaning—Unplug the AC cord from the AC outlet befor e cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners. • Use a soft damp cloth to gently wipe the panel when it is dirty .
3 Part name Remote control unit >a (Standby/On) (Page 14) A TV Press to access conventional analogue TV mode. DTV Press to access digital TV mode. SA T This function is not available for the 820 and 810 model series. RADIO DTV : Switch between radio and data mode.
4 TV (front view) 1 3 4 5 8 6 7 2 Yl/k (V olume buttons) !s/r (Programme [channel] buttons) #b (Input source button) @- (Menu button) <a (Power button) OPC sensor Remote control sensor Illumination.
5 What is the Menu? Y ou need to call up the OSD to perform settings for the TV . The OSD for the settings is called “Menu”. The “Menu” enables various settings and adjustments. Basic operation Display the Menu screen Press @ and the “Menu” scr een displays.
6 Introduction Operation without a remote contr ol unit This function is useful when there is no r emote control unit within your reach. Press @- and the “Menu” scr een displays. Press !s/r instead of a/b or Yl/k instead of c/d to select the item.
7 Attaching the stand unit Before performing work, spread cushioning over the surface on which you will be laying the TV . This will prevent it from being damaged. CAUTION Attach the stand in the correct direction. Be sure to follow the instructions. Incorrect installation of the stand may r esult in the TV falling over .
8 Using the remote contr ol unit Inserting the batteries Before using the TV for the first time, insert two supplied “AAA” size alkaline batteries. When the batteries become depleted and the remote contr ol unit fails to operate, replace the batteries with new “AAA” size batteries.
9 Initial installation overview Follow the steps below one by one when using the TV for the first time. Some steps may not be necessary depending on your TV installation and connection. Preparation Connect an antenna cable to the antenna terminal (Page 10).
10 Before turning on the power 2 1 Standard DIN45325 plug (IEC 169-2) 75 q coaxial cable AC cord (pr oduct shape varies in some countries) Check that the MAIN POWER switch on the rear of the TV is turned on ( ; ).
1 1 Initial auto installation When the TV is powered on for the first time after purchase, the initial auto installation wizar d appears. Follow the menus and make the necessary settings one after another .
12 Quick guide Searching for cable br oadcasts T o change each item to the appropriate settings: Press a/b to select the menu, and then press ; . Scrambled stations [Y es] Search method [Channel] Star.
13 Quick guide Checking signal strength and channel strength (DVB-T/C) If you install a DVB-T/C antenna for the first time or relocate it, you should adjust the alignment of the antenna to receive a good r eception while checking the antenna setup screen.
14 Daily operation Switching on/off T urning on/off the power T urn on ( ; ) the MAIN POWER switch on the rear of the TV (Page 4). T o tur n on the TV , press <a on the TV or >a on the remote contr ol unit. T o tur n off the TV , press <a on the TV or >a on the remote contr ol unit.
15 W atching TV Selecting an external video source Once the connection is made, press b to display the “INPUT” screen, and then press b or a/b to switch over to the appropriate external source with ; . NOTE Y ou can also select an external video source from “CH list” > “INPUT”.
16 W atching TV EPG EPG is a programme list that is displayed on the scr een. W ith the EPG, you can check the schedule of DTV/RADIO/ DA TA, view detailed information about them, tune to an event curr ently on-air . Useful settings for using EPG Basic setting View setting EPG If you want to use the EPG for digital stations, select “Y es”.
17 Selecting a programme using EPG Basic operation The illustrations on this page are explained using three digit services. Display/Close the EPG screen Press EPG . E Select Enter Back Exit AM PM Programme info. Search by genre Search by date Timer list NOTE Y ou can also display the EPG screen from “Menu” > “EPG” > “EPG”.
18 W atching TV Display the timer list for TV programmes Press B . Refer to page 18 for the timer setup. Timer setup using EPG Y ou can switch to a programme at a set time. Press EPG . Press a/b/c/d to select the pr ogramme you want to set, and then press ; .
19 T eletext What is teletext? T eletext broadcasts pages of information and entertainment to specially equipped TV . Y our TV receives teletext signals broadcast by a TV network, and decodes them into graphical format for viewing.
20 Before connecting ... Be sure to turn off the TV and any devices before making any connections. Firmly connect a cable to a terminal or terminals. Carefully read the operation manual of each external device for possible connection types.
21 SCART connection Example of connectable devices VCR DVD player/recor der E E VCR Decoder SCART cable (supplied accessory)/Conversion cable SCART cable NOTE In cases when the decoder.
22 VIDEO connection Example of connectable devices VCR DVD player/recor der Game console Camcorder E E E E Y ou can use the EXT 2 terminal when connecting to a game console, camcorder , a DVD player/recorder or other device.
23 Controlling HDMI devices using AQUOS LINK What is AQUOS LINK? Using the HDMI CEC protocol, with AQUOS LINK you can interactively operate compatible system devices (A V amplifier , DVD player/recorder , Blu-ray player/ recor der) using a single remote control unit.
24 Connecting an AQUOS BD player/AQUOS recor der via the AQUOS AUDIO speaker system AQUOS BD player/AQUOS recor der AQUOS AUDIO speaker system HDMI-certified cable Optical audio cable .
25 Operating an AQUOS LINK device AQUOS LINK allows you to operate the HDMI-connected device with a single remote contr ol unit. Press I to start playback of a title. See the section T op menu/title list if you want to start playback using the list of the titles in the AQUOS BD player/AQUOS recorder .
26 Picture settings Go to “Menu” > “Setup” > “Picture”. Setup A V mode Picture OPC [Off] CH list :Back :Enter Menu Backlight Contrast Picture A V mode “A V mode” gives you severa.
27 Picture Advanced This TV provides various advanced functions for optimising the picture quality . Go to “Menu” > “Setup” > “Picture” > “Advanced”. C.M.S.-hue This function adjusts the hue of a selected colour using a six-colour adjustment system.
28 Audio settings Go to “Menu” > “Setup” > “Audio”. Setup Bass Auto volume Audio Treble [Off] ST ANDARD CH list :Back :Enter Menu Balance L30 R30 Audio Auto volume Differ ent sound sources sometimes do not have the same volume level, such as a programme and its commercial br eaks.
29 Power save settings Go to “Menu” > “Setup” > “ECO”. Setup No signal off ECO picture control ECO Energy save CH list :Back :Enter Menu No operation off [Disable] [Disable] [Off] [O.
30 Channel settings Setup Quick start Auto installation View setting Channel settings CH list :Back :Enter Menu Individual setting View setting Auto installation The TV automatically detects and stores all available services in your area.
31 Basic adjustment Manual adjust Configure various settings for each service using the colour ( R / G / B ) buttons. Service no. Lock Service name Lock CH skip Old LCN CH skip Sort Delete Press a/b to select the desir ed service. Press the colour button on the r emote control unit corresponding with the item you want to reconfigur e.
32 Analogue setting Y ou can reconfigure the analogue TV channels settings automatically or manually . Additional search Use this menu to add new services automatically after “Analogue search” in the “Auto installation” menu has been completed.
33 Password/Lock settings View setting PIN Allows you to use a PIN to protect certain settings fr om being accidentally changed. Go to “Menu” > “Setup” > “View setting” > “Individual setting” > “PIN”. NOTE PIN input is required when executing “PIN”.
34 Basic adjustment Language settings View setting Digital audio language Set up to three pr eferred multi audio languages to display if the audio languages are available. Go to “Menu” > “Setup” > “View setting” > “Individual setting” > “Digital audio language”.
35 Time shift This function enables you to pause the digital TV programme you ar e watching and start watching it again from the paused scene. This function is available only for the 820 model series. Press READY . The TV starts temporary recording of the r eal time broadcast in the background.
36 Useful viewing functions Display information regar ding time shift Channel display Channel information displays by pressing p on the remote control unit. Audio (ENG) STEREO Video Subtitle Off >> New information The time shift ready icon shows up when READY is pressed and the TV is r ecording the programme.
37 Selecting the picture size Selecting the WSS picture size automatically Option WSS The “WSS” allows the TV to switch automatically among the differ ent picture size. Go to “Menu” > “Setup” > “Option” > “WSS”. NOTE Use “Wide mode” if an image does not switch to the appropriate picture size.
38 Selecting the recor ding picture size manually Option REC picture size Y ou can use this menu to set the appropriate picture size for viewing a 16:9 format TV programme on a 4:3 TV . Go to “Menu” > “Setup” > “Option” > “T erminal setting” > “REC picture size”.
39 Display settings Channel display Y ou can display the channel information by pressing p on the remote contr ol unit. DTV mode A TV mode Audio (ENG) STEREO Video Subtitle Off >> New information MONO Auto Subtitle Four digit numbers (e.g., 0001) are displayed after selecting the five Nordic countries in the country setting.
40 Setting when using external devices Input source settings Option Input select For setting the signal type of external equipment. Press b to select the input sour ce for setting the input signal (“EXT 1” or “EXT 3”) from the “INPUT” menu, and then pr ess ; .
41 Additional features Option Colour system Y ou can change the colour system to one that is compatible with the image on the screen. Go to “Menu” > “Setup” > “Option” > “Colour system”. NOTE The factory preset value is “Auto”.
42 Connecting a USB device Connect an USB device to the TV as shown below . The TV automatically switches to the USB mode when a USB device is inserted in the USB terminal (this does not work when using the time shift function). Depending on the USB device, the TV may not be able to recognise the contained data.
43 Photo mode Viewing thumbnails This bar is not shown in the “Home network” screen. Buttons for thumbnail operations Buttons Description ; When selecting a folder icon: Enter this directory . When selecting a photo thumbnail: Enlarge the photo. a/b/c/d (Cursor) Select a desired item.
44 Music mode This bar is not shown in the “Home network” screen. Buttons for music mode Buttons Description ; When selecting a music file: Play music. a/b/c/d (Cursor) Select a desired item. 6 Return to the previous operation. R button Select/deselect items ( 4 mark appears on the selected items).
45 Other useful features View setting DivX® setup This is the function to confirm your registration code. Y ou need to register the code at www .divx.com. Go to “Menu” > “Setup” > “View setting” > “DivX® setup”. DivX® VOD registration Y ou can find your registration code on this menu.
46 Connecting a PC HDMI connection PC HDMI 1, 2, 3 or 4 HDMI-certified cable PC HDMI 2* ø 3.5 mm stereo minijack cable DVI/HDMI cable When using the HDMI 2 terminal, you must select the proper item in the “Audio select” menu depending on the type of HDMI cable connected (refer to page 28 for details).
47 Adjusting the PC image automatically Option Auto sync. This function enables the screen to be automatically adjusted to its best possible condition when the analogue terminals of the TV and PC are connected with a commercially available DVI/RGB conversion cable, etc.
48 RS-232C port specifications PC control of the TV When a programme is set, the TV can be contr olled from the PC using the RS-232C terminal. The input signal (PC/video) can be selected, the volume can be adjusted and various other adjustments and settings can be made, enabling automatic programmed playing.
49 RS-232C command list CONTROL ITEM COMMAND P ARAMETER CONTROL CONTENTS POWER SETTING P O W R 0 _ _ _ POWER OFF (ST ANDBY) INPUT SELECTION A I T G D _ _ _ _ INPUT SWITCHING (TOGGLE) I T V D _ _ _ _ T.
50 T roubleshooting Problem Possible solution No power . • T ur n on ( ; ) the MAIN POWER switch on the rear of the TV (Page 4). Is the AC cord disconnected? Check if you pressed <a on the TV . • • • The TV cannot be operated. • External influences such as lightning, static electricity , etc.
51 Updating your TV via DVB-T Ensure that your TV softwar e version is always up to date. From time to time SHARP will make updated TV base software and DVB softwar e available. View setting Download setup Go to “Menu” > “Setup” > “View setting” > “Individual setting” > “Standby search” > “Download setup”.
52 Appendix Updating your TV via USB Information Software update This function allows you to update to the latest software using a USB device. Y ou must update the software through the USB terminal. T o check the software version for the TV , use the URL shown on the back cover .
53 Appendix Information on the software license for this pr oduct Software composition The software included in this product is comprised of various softwar e components whose individual copyrights are held by SHARP or by third parties.
54 Specifications Item LCD COLOUR TV (40 o /81.28 cm), LC-40LE820E, LC- 40LE810E LCD COLOUR TV (46 o /116.84 cm), LC-46LE820E, LC- 46LE810E LCD COLOUR TV (52 o /132.08 cm), LC- 52LE820E LCD panel Advanced Super View & BLACK TFT LCD (40 o /81.28 cm) Advanced Super View & BLACK TFT LCD (46 o /116.
55 Environmental specifications Item 40 inch models 46 inch models 52 inch models I On-Mode (W) (HOME MODE) 71 W 85 W 96 W J Energy-Save-Mode (W) Advanced 69 W 77 W 86 W K Standby-Mode (W) 0.20 W 0.20 W 0.20 W L Off Mode (W) MAIN POWER switch 0.01 W or less 0.
56 Rating table for child lock User -adjusted rating Broadcasted rating AGE 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Universal viewing 4 —————————————— Parental approval pref. 44444 —————————— X-rated 444444444444444 User -adjusted rating Broadcasted rating Universal viewing Parental approval pr ef.
57 Appendix Dimensional drawings LC-52LE820E LC-46LE820E LC-40LE820E ( 1127.0 ) / [ 993.0 ] ( 1127,0 ) / [ 993,0 ] ( 540.0 ) ( 540,0 ) [ 450.0 ] [ 450,0 ] ( 785.0 ) / [ 707.0 ] ( 785,0 ) / [ 707,0 ] ( 400.0 ) / [ 300.0 ] ( 400,0 ) / [ 300,0 ] ( 734.0 ) / [ 659.
58 Appendix ( 1125.0 ) / [ 992.0 ] ( 1125,0 ) / [ 992,0 ] ( 540.0 ) ( 540,0 ) [ 450.0 ] [ 450,0 ] ( 784.0 ) / [ 706.0 ] ( 784,0 ) / [ 706,0 ] ( 400.0 ) / [ 300.0 ] ( 400,0 ) / [ 300,0 ] ( 733.0 ) / [ 658.0 ] ( 733,0 ) / [ 658,0 ] [ 404.0 ] [ 404,0 ] ( 444.
59 End of life disposal Appendix.
60 Memo.
SPECIAL NOTE FOR USERS IN THE U.K. The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 13A fuse. Should the fuse need to be replaced, a BSI or AST A approved BS 1362 fuse marked or ASA and of the same rating as above, which is also indicated on the pin face of the plug, must be used.
LC-40LE820E LC-40LE810E LC-46LE820E LC-46LE810E LC-52LE820E LCD COLOUR TELEVISION LCD-F ARBFERNSEHGERÄT TÉLÉVISEUR COULEUR À ÉCRAN CRIST AUX LIQUIDES (LCD) TELEVISORE A COLORI LCD LCD-KLEURENTELE.
An important point after buying a device Sharp LC-40LE820E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sharp LC-40LE820E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sharp LC-40LE820E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sharp LC-40LE820E you will learn all the available features of the product, as well as information on its operation. The information that you get Sharp LC-40LE820E will certainly help you make a decision on the purchase.
If you already are a holder of Sharp LC-40LE820E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sharp LC-40LE820E.
However, one of the most important roles played by the user manual is to help in solving problems with Sharp LC-40LE820E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sharp LC-40LE820E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
