Instruction/ maintenance manual of the product LC-37AX3X Sharp
Go to page of 50
LCD COLOUR TELEVISION OPERA TION MANU AL LC-32AX3X LC-37AX3X MODEL.
1 LCD COLOUR TELEVISION OPERA TION MANU AL Contents …………………………………………………… 1 T rademarks ………………………………………………… 2 Dear SHARP cu.
2 Contents Useful adjustment settings ……………………………… 30 Password setting for child lock (for TV input mode) ……………………………… 30 Input Label ……………….
3 Impor tant Safety Precautions Electricity is used to perfor m many useful functions, but it can also cause personal injuries and property damage if improperly handled. This pr oduct has been engineered and manufactured with the highest priority on safety .
4 Important Safety Precautions • Cleaning—Unplug the AC cord from the AC outlet befor e cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners. • Stand—Do not place the product on an unstable cart, stand, tripod or table.
5 Supplied accessories Make sure the following accessories ar e provided with the product. Page 7 AC cord Remote control unit “AAA” size battery ( g 2) Page 13 Page 6 Operation manual Cable clamp Page 7 Safety restraints Page 8 Restraining band Screw for band Clamps Screws for clamps NO TE • Always use the AC cord supplied with the TV .
6 1 Open the battery cover . 2 Insert two supplied “AA A” size batteries. • Place batteries with their ter minals corresponding to the ( e ) and ( f ) indications in the battery compar tment. 3 Close the battery cover . CA UTION Improper use of batteries can r esult in chemical leakage or explosion.
7 Cable clamp Insert the cable clamp in the hole on the TV as shown. TV (rear view) Setting the TV Notes on installing the TV • Avoid dir ect sunlight and place the TV in a well-ventilated location.
8 Pr otection against o ver turning There is a danger of the pr oduct over tur ning in the case of a disaster or sudden collision. Carry out the following tip-resistant measur ement for your safety . Anchoring the TV to the wall or a pillar Preparation Fix the TV to the wall using extra strong ties (commer cially av ailable).
9 Preparation Simple operations for watching a TV programme Basic connection Connecting to an antenna T o enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for coaxial cable.
10 Preparation Removing the stand For wall mounting with the optional bracket, r emove the stand. Before attac hing/detaching stand • Before detaching (or attaching) stand, unplug the AC cor d from the AC outlet. • Remove all terminal covers and connected cables.
11 P ar t names TV (Fr ont) POWER indicator OPC sensor PO WER (On/Off) button TV/VIDEO button V olume up (+)/down (–) buttons Channel up ( r )/down ( s ) buttons Remote control sensor *OPC: Optical Picture Contr ol (See page 25.) SLEEP timer indicator OPC indicator* LC-AX3X(E)-a 05.
12 * Press RESET if the TV cannot r etur n to its original state after per forming various operations. This will reset the TV as shown below . • “A V MODE” r esets to “USER”. • TV channel resets to channel 1. • Sound volume is initialised.
13 P art names 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 17 16 22 19 18 20 21 NO TE • When using the remote contr ol unit, point it at the TV . Remote contr ol unit 1 m (TELETEXT) Select the TELETEXT mode. (all TV image, all TEXT image, TV/TEXT image) (See pages 39 and 40.
14 W atching TV PO WER indicator Power off The TV is in standby mode. The TV is on. Off Red Green T urning on the power Press PO WER on the TV . • POWER indicator (Green): The TV is on.
15 W atching TV Simple b utton operations for changing c hannels Y ou can change channels in several ways. Using CH r / s on the remote contr ol unit • Press CH r to increase the channel number . • Press CH s to decrease the channel number . NO TE • CH r / s on the TV operates the same as r / s on the remote contr ol unit.
16 W atching TV In the NICAM TV broadcasts When receiving a stereo signal Each time you press MPX , the mode switches between NICAM STEREO and MONO. In the TV mode of A2 TV broadcasts When receiving a stereo signal Each time you press MPX , the mode switches between STEREO and MONO.
17 W atching TV Simple b utton operation for c hanging v olume/sound NO TE • “TV”, “INPUT1”, “INPUT2”, “INPUT3” and “INPUT4” modes can store volume adjustment values separately . Using e (Mute) on the remote contr ol unit e mutes the current sound output.
18 Basic adjustment settings Menu operation b uttons Use the following buttons on the remote contr ol to operate the menu. On-Screen Displa y Example MENU: Press to open or close the menu screen. a / b / c / d : Press to select a desir ed item on the screen or adjust a selected item.
19 Basic adjustment settings Menu items List of menu items to help y ou with operations A V Mode ......................................... P age 25 OPC ................................................ P age 25 Backlight ...............................
20 Basic adjustment settings A uto installation Y ou can run auto installation again, even after setting up the preset channels. Press MENU and the MENU screen displays.
21 Basic adjustment settings Press a / b to select “Manual Adjust”, and then press ENTER . 4 Next 01 SAT.1 02 PR07 03 KABEL Programme Setup “Manual Adjust” menu Press MENU and the MENU screen displays. Press c / d to select “Setup”. 1 2 3 5 Press c / d to select “Y es”, and then press ENTER .
22 Basic adjustment settings 3 Press a / b / c / d to select the channel you want to edit, and then press ENTER . • The selected channel information displays. 1 2 Press a / b to select the optimum colour system, and then press ENTER . MENU [ Setup .
23 Basic adjustment settings 3 Press a / b / c / d to select the channel you want to edit, and then press ENTER . • The selected channel information will be displayed. Press a / b to select “Skip”, and then pr ess ENTER . • Skip menu displays.
24 Basic adjustment settings Erase Programme The individual programme can be erased. Erase programme men us 01 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 SAT.1 01 SAT.1 Pro7 02 KABEL 03 04 05 Next 02 Pro7 Next 01 SAT.1 03 KABEL Pro7 02 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 04 05 Next 01 SAT.
25 Basic adjustment settings OPC (Optical Picture Contr ol) setting Y ou can set the TV to automatically adjust the screen to suitable backlight brightness according to the lighting conditions. Press c / d to select “Pictur e”. 2 Press MENU and the MENU screen displays.
26 Basic adjustment settings Picture adjustments Y ou can adjust the picture to your pr eference. Follow the steps to adjust the picture. Press MENU and the MENU screen displays. 1 2 3 4 Press a / b to select a specific adjustment item. Press c / d to adjust the item to your desired position.
27 Basic adjustment settings Colour temperature Adjusts the colour temperature to give the best white image. Press a / b to select “Colour T emp.”, and then press ENTER . Description White with bluish tone White with reddish tone Selected item High Mid-High Middle Mid-Low Low Press a / b to select the desired level, and then press ENTER .
28 A udio adjustment For each A V position, you can adjust the following thr ee items: T reble, Bass, and Balance; to your pr eferred setting. After choosing the A V position you want to adjust, next carry out audio adjustment. Press c / d to select “Audio”.
29 Basic adjustment settings No Signal off When set to “Enable”, the power will automatically shut down if no signal inputs for 15 minutes. Press a / b to select “No Signal Off”, and then press ENTER .
30 Useful adjustment settings P asswor d setting for c hild lock (for TV input mode) Allows you to use a password to pr otect cer tain settings from being accidentally changed. Setting a passw ord Register a 4-digit password number to use the Child Lock function.
31 Useful adjustment settings 1 2 Image position For adjusting a pictur e’ s horizontal and vertical position. Press MENU and the MENU screen displays. Press c / d to select “Setup”. Description Centres the image by moving it to the left or right.
32 Useful adjustment settings Wide Screen Signalling (WSS) WSS allows a television to switch automatically among the differ ent screen formats. Press MENU and the MENU screen displays. 1 2 Press a / b to select “WSS”, and then press ENTER . 3 Press c / d to select “Setup”.
33 Useful adjustment settings 4:3 Mode set to “Normal” 4:3 Mode set to “Panorama” Selected item Normal Zoom 14:9 P anorama Full Cinema 16:9 Cinema 14:9 Description For 4:3 “standard” pictur es. A side bar appears on each side. For 14:9 letterbox pictures.
34 Rotate Y ou can set the image orientation to Mirror , Rotated or Upside down image. Press MENU and the MENU screen displays. 1 2 Press c / d to select “Setup”. Press a / b to select “Rotate”, and then pr ess ENTER . 3 [Normal]: nor mal image.
35 4 Press c / d to select “On”, and then press ENTER . Press MENU and the MENU screen displays. Press c / d to select “Option”. Press a / b to select “Audio Only”, and then press ENTER . 1 2 3 A udio Only When listening to music from a music pr ogramme, you can set the display off and enjoy audio only .
36 Useful adjustment settings 1 2 3 Press MENU and the MENU screen displays. Press c / d to select “Option”. Press a / b to select “Quick Shoot”, and then press ENTER . 4 Off On Press c / d to select “On”, and then press ENTER . NO TE • Quick Shoot may cause image noise.
37 Useful adjustment settings Colour system setting Yo u can change the colour system to one that is compatible with the image on the screen. Press MENU and the MENU screen displays. 1 2 4 3 Press c / d to select “Option”. Press a / b to select “Colour System”, and then press ENTER .
38 Useful features 4 Press a / b to select receivable teletext broadcasting language in your country . Press MENU and the MENU screen displays. 1 2 Press c / d to select “Setup”. 3 Press a / b to select “T ext Language”, and then press ENTER .
39 Useful features T eletext function What is T eletext? T eletext broadcasts pages of information and entertainment to specially equipped television sets. Y our TV receives T eletext signals broadcast by a TV network, and decodes them into graphical format for viewing.
40 Useful features Displaying Subtitle Y ou can display several subtitles as they are transmitted. Press [ to display the subtitle. • Subtitle is updated by information sent by the broadcasting station. • T o stop updating subtitle automatically , press 3 .
41 Using e xternal equipment CA UTION • T o protect all equipment, always turn off the TV befor e connecting to a VCR, DVD player , HDTV tuner , game console, camcorder or other external equipment. NO TE • See pages 41 to 43 for external equipment connection.
42 HDMI L-A UDIO-R Y P B P R (C B )( C R ) Using external equipment D VD player Component cable (commercially available) Connecting a D VD player Y ou can use the INPUT 1 or INPUT 4 (HDMI) terminal when connecting to a DVD player and other audiovisual equipment.
43 L-A UDIO-R Y P B P R (C B )( C R ) Using external equipment HDTV tuner Component cable (commercially available) Connecting an HDTV tuner Y ou can use the INPUT 2 terminal when connecting to an HDTV tuner and other audiovisual equipment.
44 Appendix T roubleshooting Cautions regarding use in high and low temperature environments • When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.
45 Appendix Item Video Colour System P AL/SECAM/NTSC 3.58/NTSC 4.43/P AL 60 TV Function P AL: B/G, D/K, I SECAM: B/G, D/K, K/K 1 NTSC: M TV -Standard Specifications Number of dots 3,147,264 dots (1366.
46 Dimensional dra wings 200 ( 200 ) 200 ( 200 ) 115 ( 104 ) 700.4 ( 822.6 ) 395.1 ( 463.8 ) 395 ( 429.4 ) 640.4 ( 708.4 ) 579 ( 647 ) 61.4 ( 61.4 ) 290 ( 306 ) 432 ( 453 ) 631 ( 671 ) 804 ( 926 ) 116 ( 116 ) 87 ( 102 ) 108 ( 108 ) LC-32AX3X, LC-37AX3X NO TE • Figures within par entheses are for LC-37AX3X.
47 HO W T O SET THE F A CT OR Y PRESETS T urn off the TV by pressing PO WER on the TV . After waiting for about 1 minute, pr ess and hold down RESET and press PO WER on the TV to turn on the TV . All setting items (except TV channel) return to the factory presetting.
FOR LOCATION ENQUIRIES WITHIN NEW ZEALAND REGARDING YOUR LOCAL SHARP CORPORATION OF NEW ZEALAND LIMITED VISIT OUR WEBSITE AT SHARP CUSTOMER SERVICES TELEPHONE: 09 573 0111 FACSIMILE: 09 573 0113 FOR LOCATION ENQUIRIES WITHIN AUSTRALIA REGARDING YOUR LOCAL SHARP APPROVED SERVICE CENTRE VISIT OUR WEBSITE AT www.
Printed in Japan TINS-C159WJZZ 05P12-JA-MG IMPOR T ANT NO TICE: This warranty applies only to products sold in A ustralia & New Zealand This Shar p product is warranted against f aults in mater ials and manuf acture f or a period of twelv e (12) months from the date of original purchase.
An important point after buying a device Sharp LC-37AX3X (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sharp LC-37AX3X yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sharp LC-37AX3X - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sharp LC-37AX3X you will learn all the available features of the product, as well as information on its operation. The information that you get Sharp LC-37AX3X will certainly help you make a decision on the purchase.
If you already are a holder of Sharp LC-37AX3X, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sharp LC-37AX3X.
However, one of the most important roles played by the user manual is to help in solving problems with Sharp LC-37AX3X. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sharp LC-37AX3X along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
