Instruction/ maintenance manual of the product LC-32FB500S Sharp
Go to page of 30
E665WJZZ 3 TINS-E665WJZZ 10P05-SP PIN SHARP ELECTRÓNICA ESP AÑA S.A Polígono Industrial Can Sant Joan Calle Sena 2-10 08174 SANT CUGA T DEL V ALLÉS BARCELONA (ESP AÑA) SHARP CORPORA TION http://www .
200.0 143.6 200.0 245 105 76 64 773 699.2 393.8 517 574 57 475.4 326.2 USB MEDIA PLAYER C.I MENU P LC-32FH500E / LC-32FH500S / LC-32FB500E / LC-32FB500S / LC-32FH510E LC-32FH510S / LC-32FB510E / LC-32FB510S / LC-32FS510E / LC-32FS510S SPECIAL NOTE FOR USERS IN THE U.
OPERA TION MANUAL Contents ....................................................................... 1 Introduction ................................................................ 2 Dear SHARP customer ................................................. 2 Important Safety Precautions .
• Cleaning—Unplug the AC cord fr om the AC outlet before cleaning the pr oduct. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners. • Use a soft damp cloth to gently wipe the panel when it is dirty . T o protect the panel, do not use a chemical cloth to clean it.
Introduction Remote contr ol unit 1 B Standby/On Enter standby mode or turn on the power .
TV (Fr ont view) TV (T op and rear view) Remote control sensor B (Standby/On) indicator Introduction WARNING • Excessive sound pressur e from earphones and headphones can cause hearing loss. • Do not set the volume at a high level. Hearing experts advise against extended listening at high volume levels.
1 Confirm that there ar e eight screws with the stand unit. 2 Attach the supporting post for the stand unit onto the base using the four scr ews with the screw driver (supplied) as shown. 3 Inserting the stand. Insert the stand into the openings on the bottom of the TV (Hold the stand so it will not drop fr om the edge of the base area).
Preparation Inserting the batteries Before using the TV for the first time, insert two supplied “AA” size zinc-carbon batteries. When the batteries become depleted and the remote contr ol unit fails to operate, replace the batteries with new “AA” size batteries.
Quick guide 1 2 3 Initial installation overview Follow the steps below one by one when using the TV for the first time. Some steps may not be necessary depending on your TV installation and connection. Connect an antenna cable to the antenna terminal (Page 8).
Quick guide Befor e tur ning on the power In order to r eceive coded digital stations, a Common Interface Module (CI Module) and a CA Card must be inserted in the CI slot of the TV . The CI Module and the CA Card ar e not supplied accessories. They are usually available fr om your dealers.
Initial auto installation When the TV is powered on for the first time after pur chase, the initial auto installation wizard appears. Follow the menus and make the necessary settings one after another . 1 Press a on the TV . • The initial auto installation wizard appears.
W atching TV Selecting language audio E DTV mode: Pressing 2 appear a menu with languages or audio sources availables depending on the r eceived broadcast. Press a / b to select the language and pr ess OK . NOTE • The audio mode screen disappears in thr ee seconds.
E Select a program 1 Select the time span Press c / d to select the time span you want to sear ch, p ress OK. • Continue to press d to display pr ograms in the next time span. 2 Select the desired pr ogram Press a / b to select the desir ed program, p ress OK .
Buttons for teletext operations Buttons Description P r / s Increase or decr ease the page number . Colour (R/G/ Y/B) Select a group or block of pages displayed in the coloured brackets at the bottom of the screen by pr essing the corresponding Colour (R/G/Y/B) on the remote contr ol unit.
Connecting exter nal devices E Before connecting ... • Be sure to turn off the TV and any devices before making any connections. • Firmly connect a cable to a terminal or terminals. • Carefully read the operation manual of each external device for possible connection types.
Connecting external devices HDMI connection The HDMI connections permit digital video and audio transmission via a connection cable from a player/ recor der . The digital picture and sound data ar e transmitted without data compression and ther efore lose none of their quality .
Connecting external devices NOTE • In cases when the decoder needs to receive a signal fr om the TV , make sure to select the appropriate input terminal to which the decoder is connected in “Input Source” (Page 10).
NOTE • The menu options differ in the selected input modes, but the operating pr ocedures ar e the same. • The screens in the operation manual are for explanation purposes (some ar e enlarged, others cropped) and may vary slightly from the actual screens.
Basic adjustment Audio settings When the Sound Mode is set to “User” , the sound can be adjusted according to your pr eferences. See the following setting table.
Basic adjustment This adjustment allows you to set or to display the following functions: Clock, Off / On Timer and Sleep T imer . ● ● Clock This function allows you to display the clock information (day / month / hour/ minute). The time and the date can’t be modified in this option.
● OSD Language Allows you to select the screens language. ● Audio Languages Allows you to select the audio language. ● Subtitle Language Allows you to select the subtitles language. ● Hearing Impaired This function allows you to activate or deactivate the subtitles for the hearing impaired.
Y ou can display the channel information that you are watching at this moment by pressing p on the remote control unit. Information that appears on the screen: Program number Program name .
After selecting Media Player , the TV loads USB device files, and shows the following screen: 1 Pressing ◄ / ► buttons you can change between differ ent modes: PHOTO , MUSIC , MOVIE or TEXT .
Buttons for full screen display operation Viewing photos on full scr een Buttons Description ▲ / ▼ (Cursor) Go to the previous/next photo in the same directory .. ◄ / ► (Cursor) Select / unselect the photos you want to see. END button Go back to the previous scr een.
USB device compatibility USB 2.0 device USB Memory , USB card r eader , HDD (Mass Storage class) File system F A T / F A T32 / NTFS Photo file format JPEG (*.
Other useful features Timeshift function (only F*510 models) Timeshift function allows you to recor d the current digital TV programme and watch it later . T imeshift requir es an exter nal USB 2.0 memory , always connected and previously configur ed to record the information.
Appendix T roubleshooting Problem Possible Solution • No power . • Check if you pressed B on the remote contr ol unit. If the indicator on the TV lights up red, pr ess B . • Is the AC cord disconnected? • Check if you pressed a on the TV . • The TV cannot be operated.
Appendix Environmental Specifications *1 On-Mode (W) (HOME MODE) 86 W *2 Energy-Save-Mode (W) ECO 63 W *3 Standby-Mode (W) 0.20 W *4 Off Mode (W) 0.17 W *5 Annual Energy Consumption (kWh) 126kWh *6 Annual Energy Consumption Energy-Save-Mode (kWh) ECO 92kWh *1 Measured according to IEC 62087 Ed.
Sharp LCD-TV with an EU Eco-label This product has of fi cially been awarded the Eco-label of the European Union, “The Flower” (for details see EU Commission Decision 2009/300/EC - OJ L 82/3 dated 28.3.2009). Sharp is the fi rst company to achieve this Eco-label for TVs thus demonstrating its commitment to improving our environment.
A. Information on Disposal for Users (private households) 1. In the European Union Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin! Used electrical and ele.
An important point after buying a device Sharp LC-32FB500S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sharp LC-32FB500S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sharp LC-32FB500S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sharp LC-32FB500S you will learn all the available features of the product, as well as information on its operation. The information that you get Sharp LC-32FB500S will certainly help you make a decision on the purchase.
If you already are a holder of Sharp LC-32FB500S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sharp LC-32FB500S.
However, one of the most important roles played by the user manual is to help in solving problems with Sharp LC-32FB500S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sharp LC-32FB500S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
