Instruction/ maintenance manual of the product LC-22GA3M Sharp
Go to page of 33
LC-22GA3M/LC-22GA3X OPERA TION MANU AL LCD COLOUR TELEVISION LC-22GA3M LC-22GA3X OPERA TION MANU AL LC-22GA3M LC-22GA3X ENGLISH Printed in Japan TINS-B558WJZZ A 04P10-JKM Printed on 100% post-consumer recycled paper . TINS-B558WJZZ A 04P10-JKM LC-22GA3MX_E_Hyo1_4.
1 ENGLISH Contents LC-22GA3M LC-22GA3 X LCD COLOUR TELEVISION ENGLISH OPERA TION MANUAL Dear SHARP Customer .................................................... 2 Important Safety Precautions ......................................... 2 T rademarks ...
2 Important Safety Precautions Electricity is used to perfor m many useful functions, but it can also cause personal injuries and pr oper ty damage if improperly handled. This pr oduct has been engineered and manufactur ed with the highest priority on safety .
3 • Cleaning—Unplug the AC cord from the AC outlet befor e cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners. • Stand—Do not place the product on an unstable cart, stand, tripod or table.
4 Make sure the following accessories are provided with the LCD TV set. Supplied Accessories LC-22GA3M LC-22GA3X Operation manual Remote control “AAA” size batteries ( × 2) AC adapter pages 5 and 9 page 5 page 6 Antenna cable page 6 AC cord page 6 Cable clamps ( × 2) page 8 *Product shape varies in some countries.
5 Installing Batteries in the Remote Control Before using the LCD TV set for the first time, install the two “AAA” size batteries supplied in the remote control. When the batteries become depleted and the remote control fails to operate, replace the batteries with new “AAA” size batteries.
6 Power Connection Preparation (Continued) Antenna Connection • Using the supplied antenna cable, connect the room antenna terminal to the antenna terminal on the LCD TV set. (Refer to the figure below.) Listening with Headphones Connect to the DC input terminal of the LCD TV set.
7 MAIN PO WER MENU TV/VIDEO CH ( ) / ( ) V OL ( ) / ( ) Upper control panel Part Names of Main Unit Controls NOTE • TV/VIDEO, CH ( )/( ) , VOL (–)/(+) and MENU on the main unit have the same functions as the same buttons on the remote control.
8 Part Names of Main Unit (Continued) Terminals Carrying handle Rear View COMPONENT ANT . (Antenna terminal) PO WER INPUT terminal (DC 13V) Y A UDIO (L) A UDIO (R) P B (C B ) P R (C R ) A UDIO (R) A U.
9 Part Names of Remote Control SUBTITLE Displays the Teletext Subtitle directly. (P. 27) OK (P. 14) HOLD Temporarily holds the current Teletext page. (P. 27) TIMER Displays the Timer functions Menu screen. (P. 23) (Mute) Switches the sound on and off.
10 ● Press MAIN POWER . The POWER indicator instantly changes from red to green and the LCD TV set is turned on. NOTE • The on-screen display disappears after a few seconds. ● To turn off the main power, press MAIN POWER again. Standby To turn off the LCD TV Press POWER .
1 1 Basic Operation (Continued) Changing Channels You can select channels using Channel Select or CH ( )/( ) . • To handle the increasing number of channels available, this LCD TV set allows you to select up to 100 positions (Channels 0 to 99). One-digit and two-digit methods of selection can be used.
12 Preset On-Screen Display Language Selection MENU on the LCD TV set can also be used to select the language. Upper control panel 31 , 2 4 Press MENU (PRESET- 1 ) on the upper part of th e LCD TV set for more than 2 seconds to display the PRESET mode screen.
1 3 Preset (Continued) ■ Setting a channel to a desired TV station Upper control panel 31 , 2 , 6 4 Press MENU (PRESET- 1 ) on the upper part of the LCD TV set for more than 2 seconds to display the AUTO mode screen. AUTO ( B/G ) VHF 1 48.25MHZ Press MENU (PRESET- 1 ) to display the MANUAL mode screen.
14 Preset (Continued) CLOCK SETUP The Timer functions that turn power on at the specified time do not work unless the clock has been adjusted. Be sure to adjust the clock first. Perform steps 1 and 2 in Channel Setting (AUTO) to display the Setup Menu screen.
1 5 Selecting Menu Items MENU MENU [ SOUND ] PICTURE SOUND SETUP FEATURES TREBLE [ TREBLE [ ]– + BASS [ BASS [ ]– + BALANCE [ BALANCE [ ]L R ADVANCED RESET 0 0 0 MENU MENU [ SETUP ] PICTURE SOUND .
16 BOOSTER Picture quality may improve in regions with weak signal strength using this function. Press MENU to display the Menu screen. Press / | to select “FEATURES”. Press ' / " to select “ BOOSTER ”, and press OK . Press ' / " to select “ON”, and press OK .
1 7 Basic Adjustment Settings (Continued) COLOUR SYSTEM (AV1, AV2 or AV3 Mode) Set the system to “AUTO” for normal reception. The “AUTO” mode automatically detects the receiving signal system and changes the reception system of the set.
18 Basic Adjustment Settings (Continued) I/P SETUP Adjusting the image and input signal can give you a more beautiful picture. Press MENU to display the Menu screen. • The Picture Menu screen can be displayed directly by pressing Red . Press / | to select “PICTURE”.
1 9 Sound Adjustments You can adjust the sound quality to your preference with the following settings. Press MENU to display the Menu screen. • The Sound Menu screen can be displayed directly by pressing Green . Press / | to select “SOUND”. Press ' / " to select a specific adjustment item.
20 Useful Features (Continued) WSS (Wide Screen Signalling) WSS allows a television to switch automatically among the different screen formats. Press MENU to display the Menu screen. Press / | to select “SETUP”. Press ' / " to select “WSS”, and press OK .
2 1 Useful Features (Continued) BACKLIGHT You can set the brightness of the screen on the LCD TV set. Press MENU to display the Menu screen. Press / | to select “FEATURES”. Press ' / " to select “BACKLIGHT”, and press OK . Press ' / " to select the desired mode, and press OK .
22 Useful Features (Continued) 1 5 2 4 WIDE MODE You can select the picture display size for the playback image of the DVD player. NOTE •“ WIDE MODE” cannot be set when 720P or 1080 Ι signal is received from the COMPONENT terminals. Press MENU to display the Menu screen.
2 3 Useful Features (Continued) AUTO POWER OFF You can set the power to automatically turn off if there is no signal for 5 minutes. Perform steps 1 and 2 in TIMER FUNCTIONS to display the Features Menu screen. Press ' / " to select “AUTO POWER OFF”, and press OK .
24 To let you enjoy NICAM broadcasting, this LCD TV set receives NICAM stereo system, bilingual, and monaural broadcasts. Stereo The LCD TV set is receiving a stereo broadcast. • Each time you press MPX , the mode changes between “NICAM STEREO” and “MONO”.
2 5 To let you enjoy A2 stereo broadcasting, this LCD TV set receives A2 stereo system and bilingual broadcasts. Stereo The LCD TV set is receiving a stereo broadcast. • Each time you press MPX , the mode changes between “STEREO” and “MONO”.
26 1 ■ Operating instructions in Teletext mode • The FLOF system for teletext is transmitted in Singapore currently. • The TOP system for teletext is transmitted in Australia currently. • If TOP Teletext is broadcast, a control line and TOP line can be displayed on the screen.
2 7 T eletext (Contin ued) [3] Changing subpages If a page has been selected from among several subpages, you can display a control line which contains the subpage numbers. Press SUBPAGE . • The control line with the subpage numbers is displayed on line 24, and the number of the currently selected subpage is displayed in blue.
28 Connecting with External Devices You can enjoy picture and sound by connecting a VCR or a home video game system to the terminals located on the rear of the LCD TV set. When connecting an external device, turn off the power of the LCD TV set first to prevent any possible damage.
2 9 Connecting with External Devices (Continued) Connecting a VCR, DVD P layer or a Camcorder ( COMPONENT/AV-IN1/2/3) NOTE • If your VCR (or other external devices) has an S-Video terminal, S-Video connection is recommended.
30 Problem Check item • Make sure the AC adapter is properly inserted in the power outlet. •R eception other than those of broadcasting stations can be considered. • Make sure the input mode is set to the LCD TV set. • Make sure the MAIN POWER switch of the LCD TV set is on.
3 1 Tr oubleshooting (Continued) Problem Check item • The reception may be weak. • The state of the broadcast may also be bad. •M ake sure the antenna is facing the correct direction. •M ake sure the outside antenna has not been disconnected. •M ake sure the antenna is facing the correct direction.
32 Unit: mm 384 212 567 100 490 (including rubber foot) 175 353 439 496 (including rubber foot) 272 476 244 178 86 63 90 100 43.9 Dimensional Drawings LC-22GA3MX_E_P28-32.
An important point after buying a device Sharp LC-22GA3M (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sharp LC-22GA3M yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sharp LC-22GA3M - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sharp LC-22GA3M you will learn all the available features of the product, as well as information on its operation. The information that you get Sharp LC-22GA3M will certainly help you make a decision on the purchase.
If you already are a holder of Sharp LC-22GA3M, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sharp LC-22GA3M.
However, one of the most important roles played by the user manual is to help in solving problems with Sharp LC-22GA3M. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sharp LC-22GA3M along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
