Instruction/ maintenance manual of the product LC 22SV2U Sharp
Go to page of 49
LIQUID CR YST AL TELEVISION TÉLÉVISEUR A CL TELEVISOR CON P ANT ALLA DE CRIST AL LÍQUIDO TELEVISOR DE CRIST AL LÍQUIDO LC-22SV2U OPERA TION MANU AL MODE D’EMPLOI MANU AL DE OPERA CIÓN MANU AL D.
LC-22SV2U LIQUID CR YST AL TELEVISION OPERA TION MANU AL ENGLISH ENGLISH IMPOR T ANT INFORMA TION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
2 IMPOR T ANT INFORMA TION (Continued) WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment.
3 DEAR SHARP CUST OMER Thank you for your purchase of the Sharp LCD Color TV product. To ensure safety and many years of trouble-free operation of your product, please read the Safety Precau- tions carefully before using this product.
4 ■ The LCD panel is a very high technology product with 1,229,760 thin film transistors, giving you fine picture details. Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please note that this does not affect the performance of your product.
5 IMPOR T ANT SAFETY PRECA UTIONS (Continued) ■ If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.
6 CONTENTS Page IMPORTANT INFORMATION ....................................................................................................... 1, 2 DEAR SHARP CUSTOMER ....................................................................................
7 Make sure the following accessories are provided with the product. SUPPLIED A CCESSORIES AC Cord Antenna Cable “ AAA ” size (UM/SUM-4) Dry Battery ( × 2) AC Adapter UBATU0026GEZZ QCNWG0003CEPA .
8 PREP ARA TION Batteries for the Remote Control Before using the LCD TV set for the first time, install two ( “ AAA ” size, UM/SUM-4) batteries (supplied). When the batteries become depleted and the remote control fails to operate, replace the batteries with new ( “ AAA ” size, UM/SUM-4) batteries.
9 A V - IN 1 L R A U D IO S - V I D E O A N T . V I D E O P O W E R IN P U T D C 1 3 V Y P B COMPONENT P R L L R AV-IN 2/O UT V ID E O A U D I O R A U D IO H E A D P H O N E 75-ohm coaxial cable 300-o.
10 Power Connection A • Use a commercially available AC plug adapter, if necessary, depending on the design of the wall outlet. • Always turn the MAIN POWER switch of the LCD TV set to off when connecting the AC adapter. • Unplug the AC adapter from the product and power outlet when not using for a long period of time.
11 A • TV/VIDEO , CH ( )/( ) , VOL (–)/(+) , and MENU on the main unit have the same functions as the same buttons on the remote control. Basically, this operation manual provides a description based on operation with the remote control.
12 A V - I N 1 L R A U D IO S - V ID E O A N T . V I D E O P O W E R I N P U T D C 1 3 V Y P B C O M P O N E N T P R L L R AV-IN 2/OUT V ID E O A U D IO R A U D I O HEAD PHONE ANT.
13 Listening with Headphones DISPLA Y AND CONTROL O VER VIEW (Continued) ■ Before connecting cables and cords into the rear terminals, remove the back covers.
14 EZ SETUP Control section of main unit 1 Press MAIN POWER , located on the upper side of the main unit, to turn on the TV. The SELECT LANGUAGE mode will be dis- played. 2 Press a / b to select “ENGLISH”, “ESPAÑOL (SPANISH)” or “FRANCAIS (FRENCH)”.
15 CH VOL POWER MENU VIEW MODE MUTE SLEEP PIC. FLIP BRIGHT DISPLAY TV/VIDEO FLASHBACK REMOTE CONTROL B ASIC OPERA TION This product is factory set to comply with the TV broadcasting system in the United States. For Brazil, Argentina and Uruguay, set the color system according to the country before using this product by following the table below.
16 AV 2 C O MP O N E N T 12 AV 1 B ASIC OPERA TION (Continued) Control section of main unit 1 Press MAIN POWER , located on the upper side of the main unit, to on. 2 The POWER indicator instantane- ously changes from red to green and the main unit is turned on.
17 Sound Volume Standby CH VOL POW ER MENU VIEW MODE MUTE SLEEP PIC. FLIP BRIGHT DISPLAY TV/VIDEO FLASHBACK To mute the sound CH VOL POW ER MENU VIEW MODE MUTE SLEEP PIC. FLIP BRIGHT DISPLAY TV/VIDEO FLASHBACK B ASIC OPERA TION (Continued) 1 Press VOL (+) to increase the sound volume.
18 1 Press the button. 2 Press the 5 button. B ASIC OPERA TION (Continued) Changing Channels Changing channels by using Channel Select on the remote control To select a 1- or 2-digit channel number (e.g., Channel 5): Complete the following procedure within 4 seconds.
19 M EN U SL E EP T I M ER V I DEO AD JUST PRE S E T CLO SED CA P T I O N V – CH I P BLO CK SE T UP SE LE CT ENT ER EX I T MENU SL EE P T I M ER SEL EC T AD J U S T EX I T MENU RE TU RN SL EE P T I .
20 1 Press VIEW MODE to display the VIEW MODE screen. ADJUSTMENTS Adjusting VIEW MODE Settings Selected item Description SIDE BAR Suitable for viewing conventional 4:3 programs in their normal format. SMART STRETCH Suitable for stretching 4:3 programs to fill the screen.
21 Press a / b to move an image on the screen to the desired position. Press c / d to retur n to the initial image position. A • This setting cannot be stored. Once the LCD TV shuts down or enters standby mode , the setting is erased. T o mo ve the picture upw ards or downw ards on the screen again, you must perf or m the abov e procedure again.
22 Directly setting the SLEEP TIMER 1 Press SLEEP to display the SLEEP TIMER screen. 2 Press SLEEP to set the sleep timer (in minutes). The SLEEP TIMER is turned off when --- is displayed. ADJUSTMENTS (Continued) Adjusting SLEEP TIMER Settings CH VOL POWER MENU VIEW MODE MUTE SLEEP PIC.
23 ADJUSTMENTS (Continued) Adjusting BRIGHTNESS Settings You can set the brightness of the screen. Directly setting the BRIGHTNESS 1 Press BRIGHT to display the BRIGHTNESS screen. 2 Press BRIGHT to change the setting. CH VOL PO W E R MENU VIEW MODE MUTE SLEEP PIC.
24 ADJUSTMENTS (Continued) Adjusting PICTURE FLIP Settings You can set the orientation of the picture. Directly setting the PICTURE FLIP 1 Press PIC. FLIP to display the PICTURE FLIP screen. 2 Press PIC. FLIP to change the setting. CH VOL PO W E R MENU VIEW MODE MUTE SLEEP PIC.
25 Adjusting LANGUAGE Settings The language for the On-Screen Display can be ENGLISH, SPANISH or FRENCH. 1 Press MENU to display the MENU screen. 2 Press a / b to move the cursor to SET UP. 3 Press c / d to enter. 4 Press a / b to move the cursor to LANGUAGE.
26 ADJUSTMENTS (Continued) Adjusting VIDEO ADJUST Settings 1 Press MENU to display the MENU screen. 2 Press a / b to move the cursor to VIDEO ADJUST. 3 Press c / d to enter. 4 Press a / b to move the cursor to the desired item. 5 Press c / d to enter.
27 A • TINT is displayed only when N358 or N443 is selected. • In BLUE SCREEN, VIDEO ADJUST settings displayed in magenta cannot be selected. • Selecting RESET will return all settings to the factory settings. (See page 26.) • TV mode This product is factory set to comply with the color system in the United States (NTSC-N358).
28 1 Press MENU to display the MENU screen. ADJUSTMENTS (Continued) Adjusting PRESET Settings Selected item Factory setting Setting options BRIGHTNESS [BRIGHT] Maximum brightness [NORMAL] Brightness 60% → Suitable for viewing in a well-lit area. Saves energy.
29 ADJUSTMENTS (Continued) SET UP ■ CHANNEL SETTING It is necessary to set the receiving mode to AIR or CABLE channels to receive locally broadcast TV programs. 1 Press MENU to display the MENU screen. 2 Press a / b to move the cursor to SET UP. 3 Press c / d to enter.
30 SET UP (Continued) ■ Saving broadcast TV channels in the memory 1 Press MENU to display the MENU screen, press a / b to move the cursor to SET UP, and press c / d to enter. 2 Press a / b to move the cursor to CH-SETTING, and press c / d to enter.
31 ADJUSTMENTS (Continued) ■ BLUE SCREEN Automatically turns the screen blue if no broadcast signal is received. 1 Press MENU to display the MENU screen. 2 Press a / b to move the cursor to SET UP. 3 Press c / d to enter. Adjusting BLUE SCREEN Settings 4 Press a / b to move the cursor to BLUE SCREEN.
32 Adjusting CLOSED CAPTION Settings A • If a broadcast contains Closed Caption data and MUTE is pressed, the set enters CAPTION mode automatically. Pressing MUTE again will return the set to its previous condition. • Closed Caption may malfunction (white blocks, strange characters, etc.
33 Adjusting V-CHIP Settings ■ V-CHIP • This function allows TV programs to be restricted and TV usage to be controlled based on FCC data. It prevents children from watching violent or sexual scenes that may be harmful.
34 ⇐ content based ⇒ FV V S L D (F antasy (Violence) (Sexual (Adult (Sexually Violence) Situation) Language) Suggestive Dialog) TV -Y (All children) TV -Y7 (Directed to Older Children) ✕ TV -G (.
35 [ 1] MPAA RATING ■ SETTING V-CHIP Adjusting V-CHIP Settings (Continued) 2 Press a / b to move the cursor to V-CHIP BLOCK, and press c / d to enter. 3 INPUT SECRET NO. will display. Input a 4-digit secret number by using Channel Select . A • When you input the secret number for the first time, press MENU to register.
36 [2] TV GUIDELINES ● Setting TV GUIDELINES P arent Contr ol (V -CHIP Operation Continued) Adjusting V-CHIP Settings (Continued) 1 Repeat steps 1 to 3 of [1] MPAA RATING . (See page 35.) 2 Press a / b to move the cursor to TV GUIDELINES. 3 Press c / d to enter.
37 [3] A CTIV A TING V -CHIP BLOCK ● Setting ST A TUS Adjusting V-CHIP Settings (Continued) 1 Repeat steps 1 to 3 of [1] MPAA RATING . 2 Press a / b to move the cursor to STATUS. 3 Press c / d to set STATUS to ON. A • If STATUS is set to OFF, V-CHIP BLOCK will not be activated.
38 [5] CHANGING V-CHIP BLOCK SETTINGS Adjusting V-CHIP Settings (Continued) 1 Repeat steps 1 to 2 of [1] MPAA RATING , then INPUT SECRET NO. will be displayed. 2 Input the 4-digit secret number by using Channel Select ; the V- CHIP select mode will be dis- played.
39 CONNECTING EXTERNAL DEVICES You can enjoy picture and sound by connecting a VCR or a home video game system to the terminals located on the rear of the TV set. When connecting an external device, turn off the power of the main unit first to prevent any possible damage.
40 CONNECTING EXTERNAL DEVICES (Continued) Connecting a VCR, DVD player or a video camera (AV-IN1/2/COMPONENT) A • If your VCR (or other external devices) has an S-video terminal, S-VIDEO connection is recommended.
41 AV-IN 1 L R AUDIO S-VIDEO ANT. VIDEO POWER INPUT DC13V Y P B COMPONENT P R L L R A V - I N 2 / O U T V ID EO A U D IO R A U D IO H E A D P H O N E VIDEO AUDIO L Y R COMPONENT AV-IN2/OUT CONNECTING .
42 TROUBLESHOOTING ■ Before calling for repair services, make the following checks for possible remedies to the encountered symptoms. TV set Problem Check item Reference Pages There is no picture. There is no picture from AV-IN1. 10 – 16 16 Sound Picture • Make sure the AC adapter is properly inserted in the power outlet.
43 Antenna Problem Check item • The reception may be weak. • The quality of the broadcast may also be bad. • Make sure the antenna is facing the right direction. • Make sure the outside antenna is connected. The picture is not sharp. TR OUBLESHOO TING (Continued) The picture moves.
44 SPECIFICA TIONS Items LC-22SV2U Model LCD panel 22 ” Advanced Super View & BLACK TFT LCD Number of dots 1,229,760 dots WVGA Video color systems N358, N443, PAL, PAL-M, PAL-N, SECAM, PAL-60 Destination USA/Latin America/Taiwan TV Standard (CCIR) NTSC/PAL-M/PAL-N TV function TV Tuning System PLL 181 ch.
45 DIMENSIONAL DRA WINGS Unit: inch/(mm) L R AUDIO OUT AV-IN 1 RGB AV -IN 2 S-VIDEO VIDEO L R AUDIO POWER INPUT DC13V CH MENU TV/VIDEO 6 33 / 64 (165.4) 9 27 / 32 (250) 1 7 / 32 (31) 4 1 / 4 (108) 3 15 / 16 (100) 1 23 / 32 (43.9) 1 23 / 32 (43.9) 3 15 / 16 (100) 19 5 / 16 (490.
46 SHARP ELECTRONICS CORPORA TION Shar p Plaza, Mahwah, Ne w Jersey 07430-2135 SHARP CORPORA TION LIMITED W ARRANTY END-USER LIMITED W ARRANTY SHARP ELECTRONICS CORPORA TION warrants to the first end .
47 LIMITED W ARRANTY Consumer Electronics Products Congratulations on y our purc hase! Sharp Electronics of Canada Ltd. (hereinafter called “ Sharp ” ) gives the following express warranty to the .
LIQUID CR YST AL TELEVISION TÉLÉVISEUR A CL TELEVISOR CON P ANT ALLA DE CRIST AL LÍQUIDO TELEVISOR DE CRIST AL LÍQUIDO LC-22SV2U OPERA TION MANU AL MODE D’EMPLOI MANU AL DE OPERA CIÓN MANU AL D.
An important point after buying a device Sharp LC 22SV2U (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sharp LC 22SV2U yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sharp LC 22SV2U - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sharp LC 22SV2U you will learn all the available features of the product, as well as information on its operation. The information that you get Sharp LC 22SV2U will certainly help you make a decision on the purchase.
If you already are a holder of Sharp LC 22SV2U, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sharp LC 22SV2U.
However, one of the most important roles played by the user manual is to help in solving problems with Sharp LC 22SV2U. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sharp LC 22SV2U along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
