Instruction/ maintenance manual of the product GeoPilot II AvMap
Go to page of 12
QUICK GUIDE.
www .avmap.it.
3 This chapter provides general information about the functions of the keys and entering data (connecting the GeoPilot2 to power). QUICK GUIDE 1.1 THE KEYBO ARD The GeoPilot2 has 7 keys, which access and control features. Some keys perform different tasks based on the operation mode.
4 and hit ‘ENTER’ to remove the item from appearing. Hit ENTER again to check the item so that it will appear on the display when that Cycle is activated. Continue to use this procedure to activate features in Cycles 1 - 3 as desired. T he - k ey Shows less detail of a larger area by changing the chart scale and zooming out on the map display .
5 the list of stored Flight Plans. Auto P osition Mode It is possible to select the Auto Zoom mode, Home Auto mode or deactivate the function. Data Window Mode This window provides navigation information relating to the Flight Plan and GPS data. Setup Data Fields Y ou can select the item to be displayed in each of the elds of the Data Window .
6 1.2.2 Main Menu The Main Menu provides access to the set up of the main features of the GeoPilot. Press and hold for 1 sec ‘MENU’ to display the Main Menu.
7 V ertical Navigation, Wind and Fuel consumption. In addition, clock functions and trip data can be found in this menu. Checklist Provides a checklist of standard procedures for Engine Start, Ground Check, Pre- T ake-off, Cruise in Flight and Landing.
8 Units Setup This sub-menu contains the various options that dene how the Geopilot2 displays units of measurement Date & Time Setup These functions control how the Geopilot2 displays time and date settings. Clear User Data Deletes all Flight Plans, T rack history and User Waypoints.
9 T o increase/decrease the brightness use respectively up/down cursor key . In addition the T ime and the GPS State are shown. 1.5 SELECTING THE LANGU AGE It is possible to select the language in which the information is displayed (for screen labels, menus and options, but it does not affect the map information).
A ppendix A : Conversion table from Aeronautical to T errestrial use A vMap Geopilot II is compatible with the terrestrial Maps of A vMap car navigators (Geosat 4 series), thus adding a new depth to the navigation. In order to use GeoPilot II as a Car navigator please consult the Geosat 4 manual (available on line at www .
.
SA TELLITE NA VIGA TION 133 Falmouth Rd. Suite E Mashpee MA 02649 www .avmap.us A vMap.
An important point after buying a device AvMap GeoPilot II (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AvMap GeoPilot II yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AvMap GeoPilot II - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AvMap GeoPilot II you will learn all the available features of the product, as well as information on its operation. The information that you get AvMap GeoPilot II will certainly help you make a decision on the purchase.
If you already are a holder of AvMap GeoPilot II, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AvMap GeoPilot II.
However, one of the most important roles played by the user manual is to help in solving problems with AvMap GeoPilot II. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AvMap GeoPilot II along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
