Instruction/ maintenance manual of the product HT-SL72 Sharp
Go to page of 16
SHARP Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. • HT-SL72 SOUND BAR HOME THEATER SYSTEM consisting of TX-SL72 (Amplifier System), CP-SW72 (Active Subwoofer System) and HT-SL72 (Sound Bar).
The following accessories are included, This )roduct has no remote control, RCA to Headphone Cable (1pin - 2 pins) x 1 (QCNWGA081 AWPZ) Wall Mount Angle x 2 (LANGKA225AW01) Screw for Brackets x6 (XEBY.
CAUTION _lk CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS NSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and/or fire.
CONSUMER LiMiTED WARRANTY SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the "Product"), when ship in its original container, will be f.
• Do not expose the unit to moisture, to temperatures higher than 140°F (60°C) or to extremely low temperatures. • If your system does not work properly, disconnect the AC power cord from the AC outlet and replug. • In case of an electrical storm, unplug the unit for safety.
FRONT VIEW 1 2 REAR VIEW 1. Left Front Speaker 2. Right Front Speaker 3. Bass Reflex Duct Reference page 4. Right Front Speaker Terminal (Red/Black) .... 10 5. Left Front Speaker Terminal (White/Black) .... 10 FRONT VIEW --3 Reference page 1. Power/Pairing Indicator .
Make sure to unplug the AC power cord before I 1 installing the unit or changing the position. 1 Select from three installation methods according to the preferred position. For 52" 60" or 70" TV Sound Bar assembly Use Sound Bar cover joint 7-13/32" (188 mm) for 52" TV.
3. Slot in the Sound Bar to the base stand according to your TV size. 60" TV { _ _ _J} 70 II TV __N _ Groove to neatly _ the wire in. Caution: • Be very careful to prevent the Sound Bar and Amplifier from falling when mounting on the wall. • Before mounting, check the wall strength.
4 Screw the wall mount angle to the wall as shown in the illustration. (Total screw is 4 pieces) • Make sure that the screw and the wall can support a load of 45 Ibs (20 kg). Wall mount angle "_ ..... E. Wall ws x 2) / ' "_ mount /- ,,,,/ ang e Wall surface ( _ .
Installation image: Notes: l As the sound from the system is omni-directional, you can place the speaker anywhere you like. However, it is TV recommended to place it as close to the TV as possible.
Caution: • Turn off all other equipment before making this connection. Notes: • Setthe TV at lowvolume before turning on the system. • GAIN knob is invalidduring DIGITAL(HDMI) function. • Make sure to set the correct inputselectoron the Amplifier to a preferred connectionbefore using any of these methods.
Switch the input selector to ANALOG. (For HT-SL77) Connect to the TV using an audio cable. 1. Method 1 TV l ToHEAOPHONEtermna -- Audio cable Amplifier Notes: • Connecting via this method may disable TV internal speakers. • In some cases, a small background noise could emit from the Sound Bar, when you use the headphone connection with a TV-Set.
I Make sure to enable the HDMI CEC when making HDMI connection. For details, refer to the operation manual I ] of the TV. (HT-SL77) 1 Plug the AC power cord into a AC outlet, the stand-by indicator turns RED. The Amplifier will automatically power on if: DIGITAL (HDMI) function: TV or similar component which supports HDMI CEC, is turned on.
Many potential problems can be resolved by the owner without calling a service technician. If something is wrong with this product, check the following before calling your authorized SHARP dealer or service center. Symptom • No sound is heard from Sound Bar/ Subwoofer.
As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production unit. There maybe some deviations from these values in individual unit.
An important point after buying a device Sharp HT-SL72 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sharp HT-SL72 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sharp HT-SL72 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sharp HT-SL72 you will learn all the available features of the product, as well as information on its operation. The information that you get Sharp HT-SL72 will certainly help you make a decision on the purchase.
If you already are a holder of Sharp HT-SL72, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sharp HT-SL72.
However, one of the most important roles played by the user manual is to help in solving problems with Sharp HT-SL72. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sharp HT-SL72 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
