Instruction/ maintenance manual of the product CD-BA2100 Sharp
Go to page of 18
OPERATION MANUAL FOR YOUR RE CORDS For your assistance in reporting this unit in case of loss or theft, please record below the model number and serial numb er wh ich a re lo cat ed o n the r ear o f th e uni t. P l e a s e r e t a i n t h i s i n f o r m a t i o n .
HK <P=001> CONTENTS Page ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 PREPARATION FOR USE . . . . . . . . . . . . . . . . . . . .
<P=002> PRECAUTIONS ■ General ● Do not use oil, solvents, gasoline, paint thinners or insec- ticides on the unit. ● Do not expose the unit to moisture, to temperatures higher than 140˚F (60˚C) or to extreme low temperatures.
<P=003> PREP ARA TION FOR USE ● Unplug the AC power cord from the AC outlet before con- necting or disconnecting any component. 2 1 3 ■ Speaker connection Connect each speaker wire to the SPEAKER terminals as shown. Use speakers with an impedance of 6 ohms or more, as lower impedance speakers can damage the unit.
<P=004> (Continued) 1 2 3 ■ Removing the speaker grilles 1 Remove the lower part of the speaker grille first. 2 Remove the upper part of the speaker grille. ● Only the grills on the woofers are removable. Caution: When the speaker grilles are removed, the speaker diaphragms are exposed.
<P=005> (Continued) ■ Demo mode When the AC power cord is first connected, the unit will enter the demonstration mode. To cancel the demonstration mode: When the unit is in the stand-by mode (demonstration mode), press the X-BASS/DEMO button. ● The demonstration mode will be canceled and the unit will be in the low power consumption mode.
HK <P=001> SETTING THE CLOCK POWER ON/ STAND-BY CLOCK MEMORY/SET TUNING/ TIME ( ) AM 12:00 AM 0:00 0:00 2 3 4 7 6 5 8 9 In this example, the clock is set for the 12-hour (AM 12:00) sys- tem. 1 Press the ON/STAND-BY button to enter the stand-by mode.
<P=002> SOUND CONTROL ■ Volume (Main unit operation) FLAT ROCK POPS JAZZ CLASSIC VOCAL 01 2 29 30 MAXIMUM ..... When the VOLUME control is turned clockwise, the volume will inc r e ase. W hen it is turned coun terclo ckw ise, th e vol ume wil l decrease.
<P=003> COMP ACT DISC OPERA TION ■ CD playback 1 Press the ON/STAND-BY button to turn the power on. 2 Press the CD button. 3 Press the OPEN/CLOSE button to open the disc tray. 4 Place the CD(s) on the disc tray, label side up. ● CDs can be placed on any open position on the disc tray.
<P=004> (Continued) ■ Disc number selection 1 When stopped, press the DISC SKIP button. 2 Press the ( ) button. ● The next disc playback will begin, after which each following disc will be played sequentially. Notes: ● When the D ISC S K IP button is pr essed dur ing playback, playback will begin automatically from the next disc.
HK <P=001> (Continued) ■ APMS (Automatic Programmable Music Selector) You can playback the tracks on the CDs in the disc 1 - 3 positions in any order desired. By specifying the disc numbers from 1 to 3, and the track numbers from 1 to 99, you can choose up to 32 selections for playback in the order you like.
<P=002> 2,3,5,6 1 4 RADIO OPERA TION ■ Tuning 1 Press the ON/STAND-BY button to turn the power on. 2 Press the TUNER (BAND) button. 3 Press the TUNER (BAND) button to select the desired fre- quency band. (FM ST, FM or AM) 4 Press the TUNING/TIME ( or ) button to tune into the desired station.
<P=003> TAPE TAPE 1 TAPE 2 PUSH EJECT PUSH EJECT 1 2,5 6 4 3 1 6 6 3 4 2,5 (Continued) To recall a memorized station: Press the PRESET ( or ) button for less than 0.
<P=004> RECORDING ● When r ecord ing important selections, be sure to make a preliminary test to ensure that the desired material is being properly recorded. ● The VOLU ME, X-BASS and EQUALIZER con trols may be adjusted with no effect on the recorded sig- nal (Variable Sound Monitor).
HK POWER ON/ STAND-BY MEMORY/ SET TUNING/ TIME ( ) CD TUNER (BAND) VIDEO/ AUX TAPE (1 2) TIMER/ SLEEP Timer set indicator <P=001> HOW TO US E THE BUI L T -I N TI ME R 3 4 5 ■ Timer recording 1 Press the ON/STAND-BY button to turn the power on.
<P=002> USING EXTERNAL UNITS ■ Video/Auxiliary (Audio signal) input To listen to or record signals from external sources through this unit: 1 Use a separately available RCA cord to connect the desired external unit to the VIDEO/AUX jacks.
<P=003> MAINTENANCE ■ Internal care ● Dirty heads, capstans or pinch rollers can cause poor sound and tape jams. Clean these parts with a cotton swab mois- tened with commercial head/pinch roller cleaner or isopropyl alcohol. ● After long use, the deck’s heads and capstans may become magnetized, causing poor sound.
TINSE0283AWZZ Printed in Malaysia A9911.HK CONSUMER LIMITED W ARRANTY SHARP ELECTRONICS CORPORA TION warrants to the first consumer purchaser that this Sharp brand product (the “Product”), when sh.
An important point after buying a device Sharp CD-BA2100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sharp CD-BA2100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sharp CD-BA2100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sharp CD-BA2100 you will learn all the available features of the product, as well as information on its operation. The information that you get Sharp CD-BA2100 will certainly help you make a decision on the purchase.
If you already are a holder of Sharp CD-BA2100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sharp CD-BA2100.
However, one of the most important roles played by the user manual is to help in solving problems with Sharp CD-BA2100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sharp CD-BA2100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
