Instruction/ maintenance manual of the product CD-BA120 Sharp
Go to page of 18
OPERATION MANUAL FOR YOUR RE CORDS For your assistance in reporting this unit in case of loss or theft, please record below the model number and serial number which are located on the rear of the unit. P l e a s e r e t a i n t h i s i n f o r m a t i o n .
IMPORT ANT SAFEGUARDS CAUTION All t he safety and op er ating in str uc tions sho uld be read before the appliance is operated, and should be retained for future reference. Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure your personal safety.
<P=002> INTRODUCTION Thank you for purchasing this SHARP product. To o btain the b es t pe rfor ma nc e f rom this p roduc t, ple ase re ad t his m an ua l c are full y. It will guide you in operating your SHARP product. CONTENTS Page ACCESSORIES .
<P=003> PRECAUTIONS ■ General ● Do not use oil, solvents, gasoline, paint thinners or insec- ticides on the unit. ● Do not expose the unit to moisture, to temperatures higher than 140˚F (60˚C) or to extreme low temperatures.
<P=004> PREP ARA TION FOR USE ● Unplug the AC power cord from the AC outlet before con- necting or disconnecting any component. 2 1 3 1 2 3 ■ Antenna connection Connect the antenna wire to the ANTENNA jack. FM antenna Position the FM antenna wire in the direction where the strongest signal can be received.
<P=005> (Continued) ■ Connecting the AC power cord Connect the AC power cord to the AC INPUT jack, then connect the AC power cord plug to an AC outlet. Notes: ● Unplug the AC power cord from the AC outlet if the unit will not be in used for a prolonged period of time.
HK <P=001> SETTING THE CLO CK POWER ON/ STAND-BY CLOCK MEMORY/SET TUNING/ TIME ( ) In this example, the clock is set for the 12-hour (AM 12:00) sys- tem. 1 Press the ON/STAND-BY button to enter the stand-by mode. 2 Press the CLOCK button. 3 Within 5 seconds, press the MEMORY/SET button.
<P=002> SOUND CONTROL ■ Volume Pr es s the VOL UME but to n to i nc rea se the v olum e an d the V O L U M E b u t t o n t o d e c r e a s e t h e v o l u m e .
<P=003> COMP ACT DISC OPERA TION ■ CD playback 1 Press the ON/STAND-BY button to turn the power on. 2 Press the CD button. 3 Press the OPEN/CLOSE button to open the disc tray. 4 Place the CD(s) on the disc tray, label side up. ● CDs can be placed on any open position on the disc tray.
<P=004> (Continued) ■ Disc number selection 1 When stopped, press the DISC SKIP button. 2 Press the ( ) button. ● The next disc playback will begin, after which each following disc will be played sequentially. Notes: ● When th e DISC S KIP bu tt on is p ressed du ring p layba ck, playback will begin automatically from the next disc.
HK <P=001> (Continued) ■ APMS (Automatic Programmable Music Selector) You can playback the tracks on the CDs in the disc 1 - 3 positions in any order desired. By specifying the disc numbers from 1 to 3, and the track numbers from 1 to 99, you can choose up to 32 selections for playback in the order you like.
<P=002> RADIO OPERA TION 4 1 2,3,5,6 ■ Tuning 1 Press the ON/STAND-BY button to turn the power on. 2 Press the TUNER (BAND) button. 3 Press the TUNER (BAND) button to select the desired fre- quency band. (FM ST, FM or AM) 4 Press the TUNING/TIME ( or ) button to tune into the desired station.
<P=003> TAPE TAPE 1 TAPE 2 PUSH EJECT PUSH EJECT 1 2,5 6 4 3 1 6 6 3 4 2,5 (Continued) To recall a memorized station: Press the PRESET ( or ) button for less than 0.
<P=004> RECORDING ● When r eco rding important selections, be sur e to make a preliminary test to ensure that the desired material is being properly recorded. ● The VO LUM E, X-B ASS and EQUALIZER c ontro ls may be adjusted with no effect on the recorded sig- nal (Variable Sound Monitor).
HK TIMER/ SLEEP Timer set indicator POWER ON/ STAND-BY MEMORY/ SET TUNING/ TIME ( ) CD TUNER (BAND) TAPE (1 2) <P=001> HOW TO USE THE BUIL T -IN TIMER 3 4 5 ■ Timer recording 1 Press the ON/STAND-BY button to turn the power on. ● Load a cassette for recording into the TAPE 2 cassette com- partment.
<P=002> HEADPHONES ● Before plugging in or unplugging the headphones, make sure the volume level is reduced. ● Be sure your headphones have a 1/8" (3.5 mm) diameter plug and a re betw een 16 oh ms a nd 50 o hm s impe da nc e. T he recommended impedance is 32 ohms.
<P=003> MAINTENANCE TAPE 1 TAPE 2 ■ Internal care ● Dirty heads, capstans or pinch rollers can cause poor sound and tape jams. Clean these parts with a cotton swab mois- tened with commercial head/pinch roller cleaner or isopropyl alcohol. ● After long use, the deck’s heads and capstans may become magnetized, causing poor sound.
TINSE0299AWZZ Printed in Malaysia A9911.HK CONSUMER LIMITED W ARRANTY SHARP ELECTRONICS CORPORA TION warrants to the first consumer purchaser that this Sharp brand product (the “Product”), when sh.
An important point after buying a device Sharp CD-BA120 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sharp CD-BA120 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sharp CD-BA120 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sharp CD-BA120 you will learn all the available features of the product, as well as information on its operation. The information that you get Sharp CD-BA120 will certainly help you make a decision on the purchase.
If you already are a holder of Sharp CD-BA120, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sharp CD-BA120.
However, one of the most important roles played by the user manual is to help in solving problems with Sharp CD-BA120. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sharp CD-BA120 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
