Instruction/ maintenance manual of the product AQUOS LC-57D90U Sharp
Go to page of 78
LIQUID CR YST AL TELEVISION TÉLÉVISEUR A CL TELEVISOR CON P ANT ALLA DE CRIST AL LÍQUIDO TELEVISOR DE CRIST AL LÍQUIDO OPERA TION MANU AL MODE D’EMPLOI MANU AL DE OPERA CIÓN MANU AL DE OPERAÇ.
1 ENGLISH LIQUID CR YST AL TELEVISION ENGLISH OPERA TION MANU AL IMPOR T ANT INFORMA TION W ARNING: T O REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NO T EXPOSE THIS PR ODUCT T O RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CA UTION: T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NO T REMO VE COVER (OR BA CK).
2 IMPOR T ANT INFORMA TION W ARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not e xpressly approv ed by the man uf acturer could v oid the user’ s authority to operate this equipment. CA UTION: T O PREVENT ELECTRIC SHOCK, MA TCH WIDE BLADE OF PLUG T O WIDE SLO T , FULL Y INSER T .
3 DEAR SHARP CUST OMER Thank y ou for y our purchase of the Sharp Liquid Crystal T elevision. T o ensure safety and man y year s of tr ouble-free operation of y our product, please read the Important Safety Instructions carefull y bef ore using this product.
4 IMPOR T ANT SAFETY INSTR UCTIONS • W ater and Moisture — Do not use this pr oduct near water – for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. • Stand — Do not place the product on an unstable cart, stand, tripod or table.
5 IMPOR T ANT SAFETY INSTR UCTIONS • Outdoor Antenna Gr ounding — If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to pr ovide some pr otection against voltage surges and built-up static charges.
6 Q UICK REFERENCE ST OP! T o safel y remo ve the A Q UOS tele vision fr om the bo x It’ s best to use two or mor e people to r emove the AQUOS television for stability . 1. Use the cardboar d holders on either side of the AQUOS television to r emove it from the box.
7 QUICK REFERENCE IMPOR T ANT : The POWER indicator on the AQUOS television should light blue indicating you have power to the AQUOS television. If the POWER indicator on the AQUOS television still does not light up, pr ess TV PO WER on the r emote control to turn the power on.
8 Contents IMPOR T ANT INFORMA TION ……………………… 1 DEAR SHARP CUST OMER ………………………… 3 IMPOR T ANT SAFETY INSTRUCTIONS …………… 3 QUICK REFERENCE ………….
9 Contents COPYRIGHT AND LICENSE NO TICE • It is the intent of Sharp that this pr oduct be used in full compliance with the copyright laws of the United States and that prior per mission be obtained fr om copyright owners whenever necessary . • This pr oduct incorporates copyright protection technology that is pr otected by U.
10 Supplied accessories Make sure the following accessories ar e provided with the pr oduct. NO TE • Always use the AC cor d supplied with the LCD-TV .
11 P ar t names TV (Fr ont) *OPC: Optical Picture Contr ol (See page 27.) **DL: DownLoad NO TE • See page 15 for the TV status indicator . POWER indicator OPC sensor Remote control sensor OPC indica.
12 P ar t names TV (Rear) * Press RESET if the TV cannot r eturn to its original state after perfor ming various operations. • A V MODE resets to DYNAMIC (Fixed) • TV channel returns to initial ch.
13 P ar t names Remote contr ol unit 2 31 8 19 20 21 22 23 24 25 26 27 28 29 30 31 11 7 4 5 6 7 8 9 11 12 13 14 15 16 10 1T V PO WER: Switches the Liquid Cr ystal T elevision power on or enters Standby mode. (See page 15.) 2 DISPLA Y : Displays the channel infor mation.
14 Preparation Using the remote contr ol unit Use the remote contr ol unit by pointing it towards the remote contr ol sensor on the TV . Objects between the remote contr ol unit and the r emote control sensor may prevent pr oper operation. Cautions regar ding remote contr ol unit • Do not expose the r emote control unit to shock.
15 “Off” is selected in OPC setting “On” or “On: Display” is selected in OPC setting W atching TV Simple operations for watching a TV pr ogram PO WER T urning on the power TV status indicator (PO WER) POWER indicator Pr ess PO WER on the TV or press TV PO WER on the remote control.
16 W atching TV Initial setup When you turn on the TV for the first time, it will automatically memorize the broadcasting channels wher e you live. Perform the following steps before you press TV PO WER on the remote contr ol unit. 1. Insert the batteries into the remote control unit.
17 Changing channels-Air/Cab le Y ou can change channels in several ways by pressing AIR or CABLE to select the antenna and then following one of the methods below . Method 1 Using CH r / s on the r emote contr ol unit or on the TV . Method 2 1. Press FLASHB A CK to switch to the pr eviously tuned channel.
18 20 W atching TV V olume adjustment Mute ■ Using V OL k k k k k / l l l l l • T o increase the volume, press V OL k k k k k . • T o decrease the volume, pr ess V OL l l l l l .
19 W atching TV NO TE • MTS only operates while in TV mode. Y ou can change MTS as shown below to match the television br oadcast signal. STEREO k SAP mode MONO mode Examples: when receiving MTS and.
20 Connecting Digital Cable Module Digital Cable Module is called CableCARD™. By attaching the CableCARD security module, you can r eceive various digital services provided by your Cable Company . T o obtain and use a CableCARD security module you need to first submit an application.
21 Basic adjustment settings A V input mode men u items List of A V menu items to help y ou with operations OPC ........................................................ Page 27 Backlight ................................................ Page 26 Contrast .
22 Basic adjustment settings EZ Setup Y ou can run EZ Setup again, even after setting up the preset channels. Language setting Select from among 3 languages: English, Fr ench and Spanish. Antenna setting Make sur e what kind of connection is made with your TV when selecting “Air” or “Cable” for ANALOG and DIGIT AL (Cable).
23 Press a / b to select ANALOG, DIGIT AL (Air), DIGIT AL (Cable) or CableCARD, and then press ENTER . 5 Basic adjustment settings Channel memory setting • On: Skips channels. (Channel selection disabled using CH r r r r r / s s s s s .) • Off: Does not skip channels.
24 Press MENU to exit. 5 Basic adjustment settings Press MENU and the MENU scr een displays. Press a / b to select “Antenna Setup - DIGIT AL”, and then press ENTER . • If you alr eady set the Secret No., input the 4- digit secret number her e. See page 54 for setting a secret number .
25 English Español Français Basic adjustment settings Standb y Mode Standby Mode may be set to either start the TV quickly from standby or conserve energy while on standby . Press MENU and the MENU scr een displays. Press c / d to select “Setup”.
26 Adjustments for PC sour ce Basic adjustment settings c button The screen dims For less contrast For less brightness For less color intensity Skin tones become purplish For less sharpness Selected i.
27 Contrast OPC Brightness Color Tint Sharpness Advanced Reset [+30] [ 0] [ 0] [ 0] [ 0] 0 –30 –30 –30 –10 +40 +30 +30 +30 +10 Backlight [+16] –16 +16 Off On On : Display Basic adjustment settings OPC setting Automatically adjusts the brightness of the scr een.
28 Basic adjustment settings 3D-Y/C Provides high quality images with minimal dot crawl and cr oss color noise. Description Normal adjustment For moving images For still images Selected item Standar d Fast Slow NO TE • 3D-Y/C is available for input signal from Composite V ideo and ANALOG IN.
29 MENU [ Audio ... Dolby Virtual ] Audio Power Control Treble Bass Balance Dolby Virtual Reset [Off] – 15 L +15 – 15 +15 R [ 0] [ 0] [ 0] MENU [ Audio ] Audio Power Control Treble Bass Balance Do.
30 Disable Enable Basic adjustment settings No signal off When set to “Enable”, the power will automatically shut down if there is no signal for 15 minutes. Press a / b to select “No Signal Off”, and then press ENTER . Press c / d to select “Enable”, and then press ENTER .
31 Basic adjustment settings Digital Setup This setting allows you to set the image of Digital broadcasting. Video Setup Y ou can adjust the settings for Digital image. Press MENU and the MENU scr een displays. Press c / d to select “Digital Setup”.
32 Using e xternal equipment Y ou can connect many types of external equipment to your TV like a DVD player , VCR, Digital TV tuner , PC, HDMI equipment, game console or camcorder . T o view external source images, select the input sour ce with INPUT on the remote contr ol unit or on the TV .
33 Using e xternal equipment Connecting a D VD play er Y ou can use the INPUT 1, INPUT 2, INPUT 4 or INPUT 5 terminals when connecting to a DVD player and other audiovisual equipment. D VD player Component video cable (commercially available) Audio cable (commercially available) When using component cable.
34.
35 Using e xternal equipment Connecting a Digital TV STB (Air or Cable) Y ou can use the INPUT 1, INPUT 2, INPUT 4 or INPUT 5 terminals when connecting a Digital TV STB (Air or Cable) and other audiovisual equipment.
36 Using e xternal equipment Connecting HDMI equipment Please use the INPUT 4 terminal when connecting HDMI equipment. HDMI equipment HDMI cable (commercially available) Displa ying an image fr om HDMI equipment T o watch an HDMI equipment image, select “INPUT4” from “INPUT SOURCE” menu using INPUT on the remote control unit or on the TV .
37 Using e xternal equipment Connecting a PC Use the INPUT 5 terminal to connect a PC. NO TE • Refer to page 69 for a list of PC signals compatible with the TV . PC with D VI terminal ø 3.5 mm stereo minijack cable (commercially available) DVI cable (commercially available) ø 3.
38 Connecting D-VHS dec ks/A V -HDD recorder/Blu-ra y Disc recorder (i.LINK connection) Using e xternal equipment About i.LINK i.LINK is an interface connection using a serial transfer system and is able to transfer multimedia data, such as digital images and digital sound, between devices that have i.
39 Using e xternal equipment Setting the Recor ding Mode (i.LINK) • The function for automatically adjusting the recor ding mode of connected i.LINK devices can be turned on or off.
40 Using e xternal equipment Selecting an i.LINK device • In or der to control an i.LINK device fr om the TV , you must first choose the i.LINK device to be controlled. • One i.LINK device can be chosen from up to 16 i.LINK connected decks. • All i.
41 Using e xternal equipment Contr olling an i.LINK device • An i.LINK compatible device can be contr olled from the TV using the i.LINK contr ol panel on the scr een. • The steps in “i.LINK Setup” on page 39 need to be completed befor ehand. • Please also refer to the operation manual of the i.
42 NO TE • IEEE1394 is the IEEE’ s inter national standard. • i.LINK and the i.LINK logo are r egister ed trademarks of Sony Electronic, Inc. • A copy protection technology is used on i.
43 Using e xternal equipment Recor ding digital pr ograms with A V -HDD recor der/Blu-ray Disc recor der • Before commencing this procedur e, the steps in “i.LINK Setup” on page 39 need to be completed beforehand. • Please also refer to the operation manual of the A V - HDD recor der/Blu-ray Disc recor der to be used with this TV .
44 Reset H-Pos. –10 +10 V-Pos. –20 +20 [ 0] [ 0] Useful adjustment settings Image position (A V input mode only) For adjusting a pictur e’ s horizontal and ver tical position. Press MENU and the MENU screen displays. Press c / d to select “Setup”.
45 30% MENU [ Setup ... Auto Sync. ] No Yes Useful adjustment settings A uto Sync. adjustment (PC input mode only) For automatically adjusting the PC image. Press MENU and the MENU screen displays. Press c / d to select “Setup”. Press a / b to select “Auto Sync.
46 INPUT SOURCE TV INPUT1 INPUT2 INPUT3 INPUT4 INPUT5 INPUT5 i.LINK MENU [ Option ... Input Select ] Option Input Select Output Select Audio Only Quick Shoot [Fixed] [ANALOG PC] [Off] MENU [ Option .
47 Useful adjustment settings Input Label Lets you set the input terminal displayed when using the INPUT SOURCE menu or channel display . Press MENU and the MENU screen displays. Press c / d to select “Setup”. Press a / b to select “Input Label”, and then press ENTER .
48 Useful adjustment settings A V MODE A V MODE gives you six viewing options to choose from to best match the surr ounding environment of the TV , which can vary due to factors like room brightness, type of program watched or the type of image input from external equipment.
49 Useful adjustment settings View mode (f or PC input mode) Y ou can select the screen size. a View Mode Normal Stretch Dot by Dot Zoom Input signal Normal Zoom Stretch Dot by Dot Keeps the original aspect ratio in a full screen display . Keeps the original aspect ratio in a full screen display .
50 Useful adjustment settings Press MENU and the MENU screen displays. Press a / b to select “Input Signal” and then press ENTER . Press c / d to select “Setup”.
51 Useful adjustment settings Description • Sound via speaker is adjusted with VO L k / l on the remote contr ol unit or VO L l / k on the TV . • Sound via the MONITOR OUT terminal is not adjustable and outputs at a consistent level.
52 Useful adjustment settings Closed Captions and Digital Closed Captions • Y our TV is equipped with an internal Closed Caption decoder . It allows you to view conversations, narration and sound effects as subtitles on your TV .
53 Useful adjustment settings Caption Setup This function allows you to adjust the closed caption screen appearance to suit your pr eferences. Press a / b to select a specific adjustment item.
54 Useful adjustment settings Secret number setting f or parental contr ol (A V input mode onl y) Allows you to use a secret number to pr otect cer tain settings fr om being accidentally changed. IMPOR T ANT : Three conditions must be met to enable the V -Chip (see pages 54 to 59): 1 Secret No.
55 Useful adjustment settings Changing the secret number Allows you to change your curr ent secret number . Repeat steps 1 to 3 in Setting a secret number . • The secret number setting menu displays. Press a / b to select “New Secret No.”, and then press ENTER .
56 Useful adjustment settings P arental control (setting V -CHIP level) V -CHIP is an electronic filtering device built into your TV . This tool gives parents a great degr ee of control over broadcasts accessed by their childr en. It allows parents to select pr ograms judged suitable for child viewing while blocking ones judged not suitable.
57 MPAA TV Guidelines Can. English Ratings Can. French Ratings L S V FV D TV-G TV-PG TV-14 TV-MA NONE TV-Y7 TV-Y MPAA TV Guidelines Can. English Ratings Can. French Ratings L S V FV D TV-G TV-PG TV-14 TV-MA NONE TV-Y7 TV-Y Useful adjustment settings V oluntary movie rating system (MP AA) Press MENU and the MENU screen displays.
58 Useful adjustment settings Canadian Rating Systems • The TV rating systems in Canada ar e based on the Canadian Radio-T elevision and T elecommunications Commission (CRTC) policy on violence in television pr ogramming.
59 MPAA TV Guidelines Can. English Ratings Can. French Ratings E C C8+ G PG 14+ 18+ NONE MPAA TV Guidelines Can. English Ratings Can. French Ratings 8ans+ 13ans+ 16ans+ 18ans+ NONE G E MENU [ Setup ... Parental CTRL ] Setup Option Secret No. – – – – V-Chip V-Chip (DTV Only) Secret No.
60 Other vie wing options NO TE • Sometimes the name of the program is not br oadcast. In that case, the program name will not be displayed. Viewing inf ormation of the program Y ou can view information about a program you ar e currently watching. Press INFO while watching a br oadcast.
61 Press FREEZE . • A moving image displays on the left screen and a still image displays on the right scr een. The still image is one frame captured fr om a moving image at the moment you pr ess FREEZE . Update the still image by pr essing ENTER . • Each time you press ENTER , the image on the right screen updates.
62 Other viewing options Manufacturer codes Akai A udio Broksonic Canon Capehar t Craig Cur tis Mathis Daew oo DBX Dynatech Emerson Fisher Funai G.E. Goldstar Hitachi Instant Replay JC P enney JVC K e.
63 Other viewing options Cable contr ol buttons When the FUNCTION is set to CBL/SA T the cable converter connected to the TV can operate using 1 to 4 . 1 SOURCE PO WER T ur ns the cable converter power on and off. 20 – 9 Press a button (or buttons) that corr esponds to the channel that you wish to watch.
64 Other viewing options VCR control b uttons The remote contr ol unit button will function as follows when the FUNCTION of the remote contr ol unit is set to VCR. • Press INPUT until the input connected to the VCR is selected. The following 1 to 8 can be used to contr ol the VCR.
65 Other viewing options Notice ■ When you c hange your ad dress • If you change your address, please r eturn the CableCARD security module to your Cable Provider Company . • Y ou will need to request a new CableCARD security module from the cable pr ovider at your new location.
.
67 Appendix Removing the stand Befor e detaching (or attaching) stand, unplug the AC cord fr om the AC input ter minal. CA UTION • Do not remove the stand fr om the TV unless using an optional wall mount brac ket to mount it. • Since the TV is very heavy , use tw o or more people to move it.
68 Appendix • No power • Unit cannot be operated. • Remote control unit does not operate. • Picture is cut off/with sidebar screen. • Strange color , light color , or color misalignment • Power is suddenly turned off. • No picture • No sound • Upgrade is displayed continuously .
69 Appendix PC compatibility c har t Apple and Macintosh ar e register ed trademarks of Apple Computer , Inc. DDC is a r egistered trademark of V ideo Electronics Standards Association. Power Management is a register ed trademark of Sun Microsystems, Inc.
70 RS-232C port specifications Return code Command 4-digits Parameter 4-digits PC Control of the TV • When a program is set, the TV can be contr olled from the PC using the RS-232C terminal.
71 Command table • Commands not indicated here ar e not guaranteed to operate. CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS POWER SETTING It shifts to standby. It input-switches by the toggle. (It is the same as an input change key) It input-switches to TV.
72 Appendix Item Model: LC-57D90U TV Function American TV Standar d A TSC/NTSC System VHF/UHF VHF 2-13ch, UHF 14-69ch CA TV 1-125ch Audio multiplex BTSC System T erminals A V in, COMPONENT in INPUT 2 .
73 Dimensional dra wings Unit: inch/(mm) 17 9 / 64 (435) 6 13 / 32 (163) 6 1 / 32 (153) 17 21 / 64 (440) 22 1 / 16 (560) 35 7 / 16 (900) 55 7 / 16 (1408) 49 5 / 16 (1253.8) 25 3 / 4 (654) 32 47 / 64 (831) 37 39 / 64 (955) 4 1 / 2 (114) 42 3 / 32 (1069) 27 53 / 64 (706.
74.
75 LIMITED W ARRANTY Consumer Electronics Products Congratulations on your purchase! Sharp Electronics of Canada Ltd. (hereinafter called “ Sharp ” ) gives the following express warranty to the fi.
76 Note LC-57D90U(E)-068-076 06.1.24, 10:13 AM 76 Black.
LIQUID CR YST AL TELEVISION TÉLÉVISEUR A CL TELEVISOR CON P ANT ALLA DE CRIST AL LÍQUIDO TELEVISOR DE CRIST AL LÍQUIDO OPERA TION MANU AL MODE D’EMPLOI MANU AL DE OPERA CIÓN MANU AL DE OPERAÇ.
An important point after buying a device Sharp AQUOS LC-57D90U (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sharp AQUOS LC-57D90U yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sharp AQUOS LC-57D90U - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sharp AQUOS LC-57D90U you will learn all the available features of the product, as well as information on its operation. The information that you get Sharp AQUOS LC-57D90U will certainly help you make a decision on the purchase.
If you already are a holder of Sharp AQUOS LC-57D90U, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sharp AQUOS LC-57D90U.
However, one of the most important roles played by the user manual is to help in solving problems with Sharp AQUOS LC-57D90U. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sharp AQUOS LC-57D90U along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
