Instruction/ maintenance manual of the product AL-1631 Sharp
Go to page of 100
DIGITAL LASER COPIER DIGITAL MULTIFUNCTIONAL SYSTEM OPERATION MANUAL Page INTRODUCTION SETTING UP THE UNIT LOADING PAPER MAKING COPIES SPECIAL FUNCTIONS MAINTENANCE TROUBLESHOOTING THE UNIT 4 7 14 46 .
FOR YOUR PROTECTION... To aid in reporting this unit in case of loss or theft, please record below the model number and serial number located on the back of the unit. We also suggest you record all the information listed and retain for future reference.
1 CAUTIONS Caution label on t he unit The label ( ) in the fusing a rea of t he uni t indicate s the followi ng: : Caut ion, ri sk of dan ger : Caut ion, ho t surface Cautions on using Follow the cauti ons be low when using thi s uni t. Warning: • The fusi ng area is hot.
2 Cautions on handling Be careful in handl ing the unit as f ollows to mainta in the perf ormanc e of this unit. Do not drop the unit, subj ect it to s hock or strike it against a ny object .
3 1 2 4 3 5 6 8 7 9 1 INTRODUCTIO N USING THE MANUALS ... .............. 4 PART NAMES ..... ............ ........... ... 5 OPERATION PANEL ....... ........... ... 6 2 SETTING UP THE UNIT SETUP PROCEDURE ................ ... 7 CHECKING PACKED COMPONENTS AND ACCESSORIES .
4 This ch apter pro vides ba sic i nformatio n for us ing the u nit. USING THE MANUAL S In addition to this printed manual an online manual is also provided. (The AL-1631 does not have an online manual.) To get full use of all features and functions of this product, be sure to familiarize yourse lf with both manuals.
5 1 PART NAMES Interface (AL-1641CS) TD cartridg e Drum cartridg e SPF Exit area 2 3 4 1 5 7 6 8 9 10 11 13 14 15 USB connector P arallel connector Original guide Document f eeder tra y Document f eed.
6 OPERATION PANEL AL-1641CS Origin al to copy ke y and indic ators (AL-164 1CS) Two-sid ed copies from one-sided orig inals. Turn on Lon g Edge or Turn on Sho rt Edge can be sel ected. Exposure mode selector k ey and indicators Use to seq uentially s elect the ex posure modes: AUTO, MANUAL or PHOTO.
7 2 Foll ow th e inst all ation proc edure below to us e the u nit pr oper ly. SETUP PROCEDURE When usi ng the unit for the first t ime, setup t he unit followi ng the pro cedure shown below. * If you are only using the unit f or copyin g, skip t his step.
8 CHECKING PACKED COMPONENTS AN D ACCESSORIES Open the carton and che c k if the follow ing com ponents and accessori es are include d. If anythi ng is not inclu ded or is dam aged, co ntact our Techni cal Assistanc e Department at 1-(630)378-3590 in the USA or 905 -568-7140 i n Canad a.
9 2 2 Remove all pieces of tape shown in the illustration below. T hen open the SP F and remo ve protect ive materials . After that , take out the bag containing th e TD cartridge. 3 Release the scan head locking sw itch. The scan hea d locking switc h is under th e docume nt glass.
10 INSTALLING THE TD CARTRIDGE 1 Open the multi-bypass tray, and then open the s ide cover. 2 Remove the CA UTION tape from the fr ont cover and remov e the two protective pins from the fus ing unit by pulling the strings upward one at a time. 3 Push gently on both s ides of th e front co ver to ope n the cove r.
11 2 5 Gently insert t he TD cartridge until it locks in place while pushing the lock release button. 6 Close the fro nt cover and t hen the side cover by press ing the round projections nea r the side cover open but ton. When closing the covers, be sure to clo s e the front cover securel y and the n close the side c over.
12 POWER ON Ensure that th e power switch of the u nit is in the OFF posi tion. Plug the other end of the power c o rd int o the neare s t out let. Turn the power s witch on th e left side of th e unit to th e "ON" position .
13 2 Initial settings of operation panel When the unit power is o n, the ope ration panel wi ll revert to the in itial settings when the time set with the "Au to cle ar time" settin g (p.55) ela pses after a cop y or scanner job is fi nished, or when the clear ( ) key is pressed twice.
14 Follow the steps below t o load pa per into the tray. PAPER For best re sults, use onl y paper recommend ed by SHARP. * Do not use non-stand ard envelop es, and envelopes that h ave met al clasps, p lastic snappers , strin g closu res, window s, lini ngs, self-adhes ive, patches o r syntheti c material s.
15 3 LOADING TH E PAPER TRAY 1 Raise the handle of the paper tray and pull the paper tray out un til it stops. 2 Remove the pressure p late lock. Rotate th e pressure p late lock in the direction of the arrow to remove it while press ing down the pres sure plat e of the pap er tray.
16 5 Fan the paper and insert it into the tray. Make sure the edges go under the corner hooks. 6 Gently push the paper tray back into th e unit. Do not l oad pape r above the max imum height line ( ).
17 3 BYPASS FEED (including speci al paper) The multi -bypass tray c an be u sed to feed s tandar d paper, t ransparenc y film, label s, envelop es, and other special purpose p aper. Paper measu ring from 3 -1/2" x 5-1/2" to 8-1/2" x 14" and in the w eight range of 14 lbs.
18 2 Set the paper guides to t he paper width. Insert the paper (print face down) all the way into the multi- bypass tray. 3 Press the tray sele ct ( ) key to sele ct the multi- bypass tray .
19 4 This ch apter explains h ow to in stall the software that a llows the AL -1641CS to be used as a printer an d scanner, and the p rocedures for us ing the prin ter and scanner function s. The followi ng term is used in this chapter. CD-ROM Means t he supplied CD- ROM with th e SHARP Perso nal MFP series sof tware.
20 HARDWARE AND SOFTW ARE REQUIREMEN TS Check the following hardware and sof tware require ments in ord er to insta ll the so ftware. * 1 Compat ible wi th Wind ows 9 8, Wind ows Me , Wind ows 2 000 Pro fessional , Wind ows X P Professi onal or Windo ws XP Home Edi tion preins talled mod el with USB interf ace equipp ed as stand ard.
21 4 Flow of installation Refer to the follow ing tabl e and then begin installation. INSTALLING THE SOF TWARE The follo wing term is use d in this section.
22 3 Double-clic k the "setu p" ( ) icon. 4 Select t he software packag es to be installed, and then cli ck the "Nex t" button. The software packages with c heckmark ( ) on the l ist on the scre en will be instal led. Clic k the "D isplay R EADM E" but ton to sho w the i nformatio n on the select ed package.
23 4 3 Click the "Nex t" button in the dialog box to install th e MFP driver or Canc el to quit the installation. The s etu p progr am wi ll sta rt to copy the fi les. If the foll owing screen app ears while the fil es are being co pied (the messa ge may appear m ore than once ), click "Contin ue Anyway".
24 10 Make sur e that the p ower of t he MFP is turned on , and then connect t he USB inter face cable or parallel in terface ca ble. (p.4 5) Window s will de tect the MFP and the Plug and Play screen will appe ar. If you are using Wi ndows XP with the parallel interface, go to s tep 12.
25 4 Installing onto Windows 98/Me/2000 (USB interface) Before sta rting the inst allation, make sure the USB inte rface cab le is not connected to the MFP. 1 Insert the supplied CD -ROM into your CD-ROM drive. 2 Double-click "My Computer" ( ), and then double-click the CD-ROM ( ) icon.
26 6 Copying files for MFP driver i nstallation. 1 After confir ming the m essage in the "Wel come" window, c lick the "Next" button. 2 A dialog b ox appear s asking y ou to verify that the interface cable is not conne cted to the MFP.
27 4 8 Begin installa tion of the Shar pdesk (Th is step will start if it wa s sel ected i n step 4). 1 After confir ming the m essage in the "Wel come to Sharpdesk installation" window, click th e "Next" but ton. 2 Read the m essage in the "Information" win dow, and then cl ick the "Next" button.
28 Installing onto Windows 95/98/Me/NT4.0/2000 (Parall el interface ) Before sta rting the inst allation, make sure the USB o r parallel in terface ca ble is no t connect ed to the MFP. 1 Insert the supplied CD -ROM into your CD-ROM drive. 2 Double-click "My Computer" ( ), and then double-click the CD-ROM ( ) icon.
29 4 7 Copying f iles for MFP driver i nstalla tion and parall el inte rface setup (Thi s step wil l start if it was selec ted in step 4 ). 1 After confir ming the m essage in the "Wel come" window, c lick the "Next" button.
30 8 Begin installa tion of the Shar pdesk (Th is step will start if it wa s sel ected i n step 4). 1 After confir ming the m essage in the "Wel come to Sharpdesk installation" window, click th e "Next" but ton. 2 Read the m essage in the "Information" win dow, and then cl ick the "Next" button.
31 4 INDICATORS ON THE OPERATION PANEL The ONLIN E ind icator an d the start ( ) indica tor indica te the st ate of the prin ter or scanner. Start indicator On: Indicates the unit i s ready for copy ing or sc anning is bein g performed. Blinking : The ind icator blinks i n the fo llowing situatio ns: • When a p rint job is in terrupted.
32 USING THE PRINTER MODE Opening the printer driver from the start menu Open the printer dri v er se tup scree n by the method sh own below. 1 Click the "start" button. 2 Click "Control Panel", select "Printers and Other Hardware", and then click "Prin ters and F axes".
33 4 How to print 1 Make sure that the paper of the desi red size and type is loaded in the tray. The pr ocedure f or loading paper i s the same as f or loading copy paper. See "LOADING PAPER" (p.14). 2 Open the document you intend to print, and select "Print " from the application's "File " menu.
34 USING THE SCA NNER MODE The scan ner driver for this unit inc ludes an STI (Still i m age) d river and WIA (Window s Image Acqu isition) driver. You can insta ll software that supports th e STI driver an d WIA driver to e nable sc anning using t he operation p anel of th e unit.
35 4 Windows 98/Me/2000 To scan directly int o an appli cation using th e Button Manager on Windows 98 , Window s Me and Windows 20 00. Set the Eve nt Manage r proper ties to se nd only t o Button Manager a s sho wn below.
36 Scan Button Destination Setting Dia log Box After you h ave completed the Button Manag er setting s in Window s, configure the sc an settings in Button Manage r. To config ure the scan settin gs in Button Manager, right cli ck the ( ) icon in the Task bar and select " Setting" from the menu tha t appears.
37 4 Flow of the Button Manager setting The But ton Manag er can direct ly handl e an AL-1641CS de vice event and start y our selecte d application accordin g to the scan setting made on the AL-1641C S operat ion panel (SC1, SC2, SC3, SC4, SC5, SC6) .
38 All About The Windows Event Mana ger and scanner events in Windows 98, Windows Me, Windows 2 000 and Windows XP. Windows Pl atforms provide a mecha nism for s oftware to h andle externa l events for a scann er device like the SHARP AL-1 641CS products .
39 4 Using the SCANNER key to begin scanning 1 Press the SCANNER ( ) key. The uni t enters scan m ode. 2 Place the original you wish to scan on the docum ent glass/SP F. For the p rocedure for plac ing the ori ginal, see "OR IGINAL PL AC EMENT" (p.
40 4 Press the start ( ) key. Scannin g will start an d the sca nned data will be transferre d to the applic ation. Opening the scanner driver and scanning from your computer Follow the steps b elow to open the s canner dri v er set up screen. As an ex ample, this instruct ion is give n using Sh arpdesk as an i m age capture applica tion.
41 4 3 Select " SHARP P ersonal M FP series", an d click t he "Select " button. 4 Select " Acquire Imag e" from the "File" me nu, or click the "Acquire" but ton ( ) . 5 Set the configuration f or scanning (refer to the online manual and help file), and click the "Scan" button.
42 Scanning with the "Scann er and Camera Wizard" in Windows XP Window s XP inclu des as a standard f eature an ima ge scann ing function. Th e procedure for scanning w ith the " Scanner and Cam era Wiza rd" is explaine d here. 1 Place the original you wish to scan on the docum ent glass/SP F.
43 4 HOW TO USE THE ONLINE MANUAL The onli ne manual p rovides detail ed instru ctions for opera ting the unit as the p rinter or scann er and a list of m ethods for deal ing with printi ng or scan ner problems. To acces s the on line manual, y our comput er must h ave Acrobat R eader 5.
44 USING OTHER INSTALL ED DRIVERS If you us e another GDI printer or a Windows Printin g System printer, interferenc e between printers m ay occ ur and prin ting may not be performed properly .
45 4 CONNECTING THE IN TERFACE CABLE This uni t includes both USB and parallel i nterface connec tors. Interface cables for conn ecting the unit to your comp uter are no t included wit h this unit. Plea se purchase the approp riate cable f or your co mputer.
46 This ch apter explains b asic and other copying functi ons. The unit is equipped w ith a o ne-page memory buffer. This m emory a llows the unit t o scan an original once o nly and make u p to 99 c opies.
47 5 About interrupt copying If you pre s s the start ( ) key to begin a copy job wh ile a pr int job u s ing t he paper tray or mul ti-bypass tray is in progress, th e copy job will be gin automa tically after the print data in the unit's mem ory is p rinted (interrupt c opying).
48 Using the SPF The SPF is designed to hol d up to 30 orig inals m easuring from 5-1/2" x 8-1/ 2" to 8-1/2" x 14" and weight ing from 14 lbs. to 23.9 lbs. (52 g /m 2 to 90 g /m 2 ). 1 Make sure that no original is left on the document glass .
49 5 SET THE COPY QUANTITY Set the num ber of copies us ing the two copy qu antity ( , ) keys when copyin g from the d o cument glass or copyi ng from SPF. • Press the ri ght copy q uantity key to se t the unit digit from 0 to 9. This key will not change the tens digit.
50 Automat ic exposure a djustment The autom atic expo sure lev el ca n be a dju sted t o sui t yo ur c opyin g ne eds. This leve l is set f or copyi ng from the d ocume nt glass and copyi ng from the SPF respec tively.
51 5 REDUCTION/ENLARGEMENT/ZOOM Three pr eset reduction rati os and two enlarg ement ratio s can be selected . The zoom function enables co py ratio s election from 2 5% to 400% in 1% increm ents. 1 Set the or iginal an d check th e paper size. 2 Use the co py ratio se lector key and/or ZOOM ( , ) keys to select t he desired c opy ra tio.
52 This ch apter describ es the sp ecial function s of th is unit. U se thes e functions as needed. ABOUT THE SPECIAL FUNCT IONS OF AL-1641CS Two sided copying When cop ying from one-s ided originals to two-sided copies, copy ing orientati on can be selec ted between Tu rn on Long Edge and Turn on Sh ort Edge.
53 6 Making two-sided c opies 1 Place the o riginal(s) on the do cument gla ss or in t he SPF. (s ee "ORIGINAL PLACEMENT" (p.47 ). 2 Select two-side d copy mode.
54 DESCRIPTION OF SPECIAL FUNCTIONS Toner save mode (page 54) Reduce s toner c onsumption by approxim a tely 10%. Power s ave modes ( page 55) The unit h as two power save mo des of operation : preheat mod e and auto power shut-off m o de.
55 6 2 Press and hold dow n the exposure mode selector key for approximately 5 seconds. The MANUAL ( ) indicator w ill go out and the PHOTO ( ) indicator will begin to blink. The light an d dark indicator marked "5" will light up, indi cating the standard toner mode is active.
56 * Factory d efault se ttings are indic ated with a n asteris k (*). 5 Press the start ( ) key. Th e right -hand numbe r in the dis play will be steadily lit and the entered v alue will be stored . 6 Press the light ( ) or dark ( ) key to ret urn to th e normal copy mode.
7 57 This c hapter de scribes how to repla ce the TD cart ridge and d rum cartr idge and how to clean the unit. TD CAR TRIDGE R EPLAC EMENT The TD cart ridge replaceme nt required ( ) indicato r will light up whe n toner is needed. F or more informati on on purc hasing the TD cartridge, see "ABOUT SUPPLIES AND OPTIO NS" (p.
58 4 Close the f ront cover and then th e side cover by pressi ng the round projections near the side cov er open button. The indicator ( ) will go out and the start ( ) indicator will light up. DRUM CARTRIDGE REPL ACEMENT The usefu l life of the drum cartridge is ap proximately 18,000 copies .
59 7 4 Gently inst all the TD cartridge. To install the TD car tridge, see "INSTALLING THE TD CARTRID GE" (p.10). 5 Close the front cover and then the side co ver by p ressing th e round projectio ns near the side cover open butto n. The drum replacement required ( ) indicator will go out and the start ( ) indic ator will light up.
60 Transf er charge r If copies start bec oming streaky or blotchy, the transfer c harger may be di rty. Clea n the charg er using the foll owing procedu re. 1 Tu rn th e pow er switch off. (p .13) 2 Ensure that the multi-bypas s tray is open and then open the side cover while pr essing the side cover open butto n.
61 8 This ch apter describ es misfe ed removal and troubleshoot ing. For prob lems with the printer functio n or the scanner f unction, see the online manual or the He lp file fo r the printe r/scanner driver. TROU BLESHOOT ING If any pro blem occurs, c heck the list bel ow before conta cting our Technical Assi stanc e Depa rtment .
62 STATUS INDICA TORS When the foll owing indicato rs light up or blink on the operati on panel or the follo wing alphanum eric codes ap pear in the display, solv e the problem i m med iately ref erring to bot h the table below and the relevant page. Be sure to use only genui ne SHARP pa rts and supplies .
63 8 MISF EED REMO VAL When t he misfe ed ( ) in dicator b links or blin ks in the disp lay, the unit will stop because of a misfeed. If a misfeed occu rs when using the SPF, a number may appear in the display af ter a minus s ign. This indicates the number of the orig inals that mus t be returne d to the docume nt feeder tray after a misfee d.
64 A: Misf eed in the paper feed a rea 1 Gently re move the misf ed paper f rom the pa per feed are a as shown in the illustration. W hen the misfeed ( ) indicator blinks, and the misfed paper is not se en from the paper feed area, pull out the paper tray and remove the misfed paper.
65 8 B: Misf eed in the fusing are a 1 Lower th e fusing un it releas e lever. 2 Gently re move the misfed paper from under the fusin g unit as shown in the illustration. If t he paper cannot be removed, proceed to "C: Misf eed in the trans port area".
66 C: Mi sfeed in th e transport area 1 Lower th e fusing un it releas e lever. See "B: M isfeed in the fu sing ar ea" (p.65). 2 Open the front cover .
67 8 D: Mi sfeed in th e SPF An original m i sfeed may occur at on e of three locat ions: if the misfed orig inal is seen from the docum ent feeder t ray, (A) in the docume nt feeder tray; if the misfed orig inal is not s een from th e docum ent feeder t ray, (B) in the exit area or (C) un der the doc ument feed er cove r.
68 SPE CIF ICAT IONS Mode l AL-1631 AL-1641CS Type Digital laser copier, desk-top type Digital multifunctional system, desk-top type Copy/printer system Dry, electrostatic transfer Originals Sheets, b.
69 9 * 1 Feed paper lengthwise only. * 2 Leading and trailing edges. * 3 Along the other edges in totals. * 4 Data transmission time is not included. (Only for printer) * 5 Not includes TD an d drum cart ridges. Scanning spee d Max. 2.88ms /line Memory 8 MB Power supply 120V, 60Hz, 9.
70 ABOUT SUPPLIES AND OPTIONS When or dering su pplies, ple ase use the cor rect part nu mbers as liste d below. Supply list * Based on copying onto l etter-type paper at 5% toned area (The life of the TD cartrid ge which has be en included in the unit at the factory i s approxim ately 2,000 sheets.
71 9 MOVING AND STORING THE UNIT Moving instructions When mov ing the u nit, follow the procedure below. 1 Turn the pow er switch of f and remo ve the power co rd f rom t he outl et. 2 Open the side cover an d front co ver, in tha t order. Remo ve the TD cartridge and close the front cover and side cover , in that ord er.
72 SOFTW ARE LICENSE PLEASE READ THIS LICENSE CAREFULL Y BEFORE US ING THE SOFTW ARE. BY USING THE SOFTW ARE, YOU ARE A GREEING T O BE BOUND BY THE TERMS OF THIS LICENSE.
73 6. Limit ed W arrant y on Med ia. SHARP wa rrants the d isks o n which the Softwa re is re corded to be free from defect s in materi als and workmans hip und er nor mal u se for a perio d of ni nety (90) days f rom the date o f purch ase as evidenced by a copy of the r eceipt.
74 IMPOR T ANT SER VICE INFORMA TION (U.S.A. only) If a Problem Occurs Most op erationa l quest ions can be a nswer ed by referr ing to the Operati on Manua l or Onli ne Manu al. Also, fo r your co n ven ience, yo u will find answ ers to frequen tly asked que stion s on our w ebsite at www .
75 END-USER LIMITED W ARRANTY (V alid in U .S.A. only) SHARP ELECTR ONICS CORPORA TION warrants to the first end-use r purchaser that this Sharp brand product (the "Product"), when shipped i.
MATERIAL SAFETY DATA SHEET Data Revised: Jul. 31, 2002 Data Issued: Jun. 1, 199 8 MSDS NO. F-00831 76 1. PRODUCT AND COMPANY IDENTIFICATION Product Name : AL-100TD / DM-150TD / AL-110TD / AL-110DC (Black Toner) Supplie r Identif ication : Sharp Corpor ation 22-22 Nagaike-cho, Abeno-ku, Osaka, Japan Local suppliers are listed below.
MATERIAL SAFETY DATA SHEET Data Revised: Jul. 31, 2002 Data Issued: Jun. 1, 199 8 MSDS NO. F-00831 77 3. HAZARDS IDENTIFICATION Most Imp ortant Hazards an d Effects of the Products Human Health Effects : There are no anticipated carcinogenic effects from exposure based on animal tests perform ed using toner.
MATERIAL SAFETY DATA SHEET Data Revised: Jul. 31, 2002 Data Issued: Jun. 1, 199 8 MSDS NO. F-00831 78 8. EXPOSU RE CONTROL / PERSONA L PROTECTION Eng inee ring M eas ures Ventilation : None required with intended use.
MATERIAL SAFETY DATA SHEET Data Revised: Jul. 31, 2002 Data Issued: Jun. 1, 199 8 MSDS NO. F-00831 79 Chronic E ffect : In a study in rats of chronic inhalation exposure to a typical toner, a mild to .
MATERIAL SAFETY DATA SHEET Data Revised: Jul .31, 2002 Data Issued: Jun. 1, 199 8 MSDS NO. F-30831 80 1. PRODUCT AND COMPANY IDENTIFICATION Product N ame : AL-100TD / DM-150TD / AL-110TD / AL-110DC (Black Develope r) Supplie r Identif ication : Sharp Corpor ation 22-22 Nagaike-cho, Abeno-ku, Osaka, Japan Local suppliers are listed below.
MATERIAL SAFETY DATA SHEET Data Revised: Jul .31, 2002 Data Issued: Jun. 1, 199 8 MSDS NO. F-30831 81 3. HAZARDS IDENTIFICATION Most Imp ortant Hazards an d Effects of the Products Human Health Effects : There are no anticipated carcinogenic effects from exposure based on animal tests perform ed using toner.
MATERIAL SAFETY DATA SHEET Data Revised: Jul .31, 2002 Data Issued: Jun. 1, 199 8 MSDS NO. F-30831 82 Personal Prot ective Equipment Respiratory Protection : Not required under intended us e. Hand Protection : Not required under intended us e. Eye Protect ion : Not r equired under intended use.
MATERIAL SAFETY DATA SHEET Data Revised: Jul .31, 2002 Data Issued: Jun. 1, 199 8 MSDS NO. F-30831 83 12. ECOLOGICAL INFORMATION No data are available. 13. DISPOSAL CONSIDERATION Waste from residues : Waste material may be dumped or incinerated under conditions which meet all federal, state and local environmental regulations.
MATERIAL SAFETY DATA SHEET Date Issued : Sep . 1, 2003 MSDS No. F-01231 84 1. PRODUCT AND COMPANY IDENTIFICATION Product Name : AL-1651CS/AL-1661CS/AL-1631/ AL-1641CS/AL-1 217D/AL-1457D (Black Toner) Supplie r Identif ication : Sharp Corporation 22-22 Nagaike-cho, Abeno-ku, Osaka, Japan Local suppliers are listed below.
MATERIAL SAFETY DATA SHEET Date Issued : Sep . 1, 2003 MSDS No. F-01231 85 3. HAZARDS IDENTIFICATION Most Imp ortant Hazards an d Effects of the Products Human Health Effects : There are no anticipated carcinogenic effects from exposure based on animal tests perform ed using toner.
MATERIAL SAFETY DATA SHEET Date Issued : Sep . 1, 2003 MSDS No. F-01231 86 8. EXPOSU RE CONTROLS / PERSONAL PROTECTION Eng inee ring M eas ures Ventilation : Not required und er intended use.
MATERIAL SAFETY DATA SHEET Date Issued : Sep . 1, 2003 MSDS No. F-01231 87 Chronic E ffect : In a study in rats of chronic inhalation exposure to a typical toner, a mild to moderate degree of lung fib.
MATERIAL SAFETY DATA SHEET Date Issued : Sep . 1, 2003 MSDS No. F-31231 88 1. PRODUCT AND COMPANY IDENTIFICATION Product N ame : AL-1651CS/AL-1661C S/AL-1631/AL-1641C S/AL-1217D/AL-1457D (Black Developer) Supplie r Identif ication : Sharp Corpor ation 22-22 Nagaike-cho, Abeno-ku, Osaka, Japan Local suppliers are listed below.
MATERIAL SAFETY DATA SHEET Date Issued : Sep . 1, 2003 MSDS No. F-31231 89 3. HAZARDS IDENTIFICATION Most Imp ortant Hazards an d Effects of the Products Human Health Effects : There are no anticipated carcinogenic effects from exposure based on animal tests perform ed using toner.
MATERIAL SAFETY DATA SHEET Date Issued : Sep . 1, 2003 MSDS No. F-31231 90 8. EXPOSU RE CONTROLS / PERSONAL PROTECTION Eng inee ring M eas ures Ventilation : Not required und er intended use.
MATERIAL SAFETY DATA SHEET Date Issued : Sep . 1, 2003 MSDS No. F-31231 91 Chronic E ffect : In a study in rats of chronic inhalation exposure to a typical toner, a mild to moderate degree of lung fib.
92 INDEX A Acrobat Rea der ......... ................. ....... 43 Alar m in dicat or - Drum replacem ent require d indicator ................ .............. 6, 58, 62 - Misfe ed indic ator ........ ........ 6, 62, 6 3 - TD ca rtridge replacem ent require d indicator .
93 M Making copies ...... ........... ................. . 46 MFP d river - Print Status Window .............. ....... 19 - Printer driver ............... .................. 19 - Scanner drive r ...... ........................ 19 Misfeed indicator .. .
94 U USB interfac e cable ..................... 45, 7 0 Using other inst alled drivers ....... ....... 44 Using the manua ls ...................... ......... 4 Using the printer mo de ..................... . 32 Using the scanner mode . ...............
95 MEMO.
96 MEMO.
For users in the USA This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
PRINTED IN CHINA KS TINSE1161QSZZ 2003J Printed on 100% post-consumer recycled paper SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07430-1163.
An important point after buying a device Sharp AL-1631 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sharp AL-1631 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sharp AL-1631 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sharp AL-1631 you will learn all the available features of the product, as well as information on its operation. The information that you get Sharp AL-1631 will certainly help you make a decision on the purchase.
If you already are a holder of Sharp AL-1631, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sharp AL-1631.
However, one of the most important roles played by the user manual is to help in solving problems with Sharp AL-1631. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sharp AL-1631 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
