Instruction/ maintenance manual of the product AF-R100CX Sharp
Go to page of 20
ROOM AIR CONDITIONER INSTALLATION AND OPERATION MANUAL PAGE CONTENTS This INSTALLATION AND OPERATION MANUAL explains the proper use of your new Sharp Air Conditioner. Read these instructions carefully before installing or operating your air conditioner.
2 To aid in answering questions if you call for service or for reporting loss or theft, please record below the model and serial number located on the right side of the unit.
3 SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the "Product"), when shipped in its original container, will be free from defective wo.
4 INST ALLA TION INSTRUCTIONS Before beginning installation, read these instructions carefully. Use the enclosed MOUNTING KIT for proper installation. The mounting kit is designed for wooden sill double or single hung sash-type windows.
5 7 6 5 4 3 2 1 ITEMS P ACKED WITH THIS UNIT No. Accessories Q'ty Right closure assembly Left closure assembly Window sash foam seal 1 1 1 SUGGESTED T OOLS 1. Screw driver (medium size Phillips) 2. Tape measure or ruler 3. Knife or scissors INST ALLA TION INSTRUCTIONS 13 Screws(L=1", 25.
6 INST ALLA TION INSTRUCTIONS Open the window sash and place the cabinet on the sill. Close the window sash securely behind the top angle. If there is space between the bottom channel and the sill, fill the gap with a thin board or other hard filler.
7 Indoor side INST ALLA TION INSTRUCTIONS Closure assembly (Left) 6 Jamb (Left) Top angle Sill 1/2 inch (13mm) Closure assembly (Left) Stool Insert the closure assemblies on both sides into the rails of the jamb. Secure the cabinet to the window stool with 3 screws (L=1", 25.
8 PRECAUTIONS 3-Pronged receptacle 3-Pronged plug Grounding prong Grounded receptacle box Grounding adapter Grounded receptacle box Screw Tab for grounding screw Grounding wire IMPORTANT: Points to keep in mind when using your air conditioner.
9 PRECAUTIONS • Allow 3 minutes for the compressor to restart cooling. If you turn the air conditioner off and immediately restart it, allow three minutes for the compressor to restart cooling. There is an electronic device in the unit that keeps the compressor off three minutes for protection.
10 HIGH COOL MED COOL LOW COOL FAN ONLY SELECTOR ENERGY SAVER POWER ON/OFF TEMP F hr TIMER ON/OFF 1 2 3 4 5 6 7 8 9 10 11 8 12 1 2 3 4 5 6 7 9 10 11 2 1 SELECTOR indicator Receiver window for remote control signal Display SELECTOR pad TIMER ON/OFF pad TIMER indicator P ARTS NAMES UNIT CONTROL P ANEL TEMPERATURE setting pad ---- Lower temp.
11 F hr POWER ON/OFF POWER ON/OFF F hr TEMP OPERA TION INSTRUCTIONS --- Lower temp. --- Raise temp. COOLING OPERA TION Display / Indicator Touch POWER ON/OFF pad. To turn off the unit, touch POWER ON/OFF pad again . • POWER indicator and SELECTOR indicator (HIGH COOL) will light.
12 LOW COOL MED COOL HIGH COOL SELECTOR SELECTOR T O CHANGE F AN SPEED Procedure • SELECTOR indicator will light in order as you touch. NOTES ON F AN SPEED Display / Indicator Pad Fan operates at medium speed; cooling power at medium. F AN ONL Y OPERA TION Cooling for sleeping comfort with low fan speed.
13 CLOSED OPEN EXHAUST Lever ENERGY SAVER ENERGY SAVER HOW TO OPERA TE ENERGY SA VER T O CHANGE AIR FLOW DIRECTION During normal operation, the thermostat automatically controls cooling and the fan runs continuously.
14 0.5h 1.0h 1.5h 10h Preset(0.5h) Previous setting 11h 12h CL(cancel) F hr TIMER ON/OFF HOW TO OPERA TE ON TIMER OPERA TION • After setting the ON TIMER, change the temperature and fan speed settings as shown on pages 11 and 12.
15 0.5h 1.0h 1.5h 10h Preset(0.5h) Previous setting 11h 12h CL(cancel) F hr TIMER ON/OFF HOW TO OPERA TE OFF TIMER OPERA TION • This unit has a built-in timer that can be programmed to shut the unit off up to 12 hours in advance. • You can set the timer to stop in increments of 30 minutes (0.
16 Insert the batteries in the compartment, making sure the and polarities are properly aligned. HOW TO OPERA TE USING THE REMOTE CONTROL INST ALLING BA TTERIES Use two size-AAA (R03) batteries. Battery compart- ment cover NOTES: • The battery life is approximately one year with normal use.
17 HIGH COOL MED COOL LOW COOL FAN ONLY • The time setting will change as you push the button. The display will change as follows; • The last OFF time setting is memorized by the unit and will appear on the display when the button is pushed. • The timer will be set, 5 seconds after the SET TIMER / OFF button is pushed for the last time.
18 ENERGY EFFICIENCY TIPS CLEANING AND MAINTENANCE CLEANING THE FIL TER If the filter is clogged with dust, the amount of air flow will be reduced, resulting in poor cooling performance.
19 BEFORE CALLING FOR SER VlCE IF YOUR AIR CONDITIONER DOES NOT OPERATE PROPERLY, PLEASE CHECK THE FOLLOWING ITEMS BEFORE CALLING FOR SERVICE. AIR CONDITIONER DOES NOT OPERATE AT ALL • Is the unit p.
20 SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07430-2135 SHARP CORPORATION Osaka, Japan Printed in Thailand TINSEA297JBRZ 01LO TL 1.
An important point after buying a device Sharp AF-R100CX (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sharp AF-R100CX yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sharp AF-R100CX - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sharp AF-R100CX you will learn all the available features of the product, as well as information on its operation. The information that you get Sharp AF-R100CX will certainly help you make a decision on the purchase.
If you already are a holder of Sharp AF-R100CX, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sharp AF-R100CX.
However, one of the most important roles played by the user manual is to help in solving problems with Sharp AF-R100CX. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sharp AF-R100CX along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
