Instruction/ maintenance manual of the product T9 Value Sharkoon
Go to page of 15
Manual.
T9 Cont ent 1 . Features 2. P ac kage content 3. The case at a glance 4. Installation of a mainboard 5. Installation of a PSU 6. Installation of a HDD 7 . Installation of an optical device 8. Installation of a 3.5" device 9. Installation of an add-on card 1 0.
T9 1 . Feat ur es • A TXcase • 9x5.25"drivebays • FrontI/O(V alueedition):1xUSB3.0,3xUSB2.
T9 • Accessorykit: Stand-offs for mainboard W ashers Loc kat tac hment(A)andspeak er(B) MountinganglesforHDDs(decoupled/ A)and 3.5"devices(notdecoupled/B) Quic kfastener sforopticaldrives 5.
T9 3. The case at a glance Front view A – FrontI/O(V alueedition): a – P owerLED b – USB3.0connector c – USB2.
T9 Side view (opened/lef t) A – Drive bays for 5.25" devices B – Mainboardmountingpanelwith: a – Installation opening for CPU cooler s and b – Cable management system.
T9 4. Installation of a mainboard 1 . Open the case by loosening the thumb screws on the case ’ s bac k side and removing the left sidepanel.Laydownthecasesidewiseonanevensurface.
T9 3. Remo ve the mainboard and screw the stand-offs into the respective drillings of the mountingpanel(g.3). (Stand-offs) g.3 4. Press the I/O shield (delivered with the mainboard) into the I/O shield opening in the case’ s bac k side.
T9 6. Plug the connectors of the case ’ s front bezel to the respecti ve connectors of the mainboard (also refer to your mainboard’ s manual for further information).
T9 6. Installation of a HDD 1 . R emove the case ’ s right side panel. 2. At tac hthedecoupledmountinganglestotheHDDfrombothsides(g.
T9 7 . Installation of an optical device 1 . R emovethecase ’ sfrontpanelbygentlydraggingittowardsyou(g.9).
T9 4. At tac htheopticaldevicefrombothsidesusingthequic kfasteners(g.13). g.13 Note: If you intend to transport the case we recommend securing (additionally) the installed dri ves: Screws for 5.
T9 3. Screwthemountinganglestothe3.5"devicefrombothsides(g.1 6). g.16 4. Slide the 3.5" device with at tac hed mounting rails into the case ’ s drive bay (g.
T9 9. Installation of an add-on card 1 . R emovetheslotbezel’ sxationscrewandtak eawaytheslotbez el(g.
T9 1 1 . Installation of additional f ans / optimized airflo w 1 . Place the fan ag ainst the respecti ve brac k et from the inside (e.g. in the side panel).
An important point after buying a device Sharkoon T9 Value (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sharkoon T9 Value yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sharkoon T9 Value - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sharkoon T9 Value you will learn all the available features of the product, as well as information on its operation. The information that you get Sharkoon T9 Value will certainly help you make a decision on the purchase.
If you already are a holder of Sharkoon T9 Value, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sharkoon T9 Value.
However, one of the most important roles played by the user manual is to help in solving problems with Sharkoon T9 Value. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sharkoon T9 Value along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
