Instruction/ maintenance manual of the product GI465D Shark
Go to page of 6
1500 Watt Iron OWNER'S MANUAL Model GI465D 120V., 60 Hz., 1500 Watts For infor mation or assistance : U.S.: EURO-PRO Oper ating LLC Canada: EU RO-PRO Operati ng LLC 94 Main Mill S treet, Doo r 16 4400 Bois Fran c Plattsbu rgh, NY 12901 St. Laurent, QC H4S 1A7 Tel.
Model GI46 5D IMPORTANT SAFETY INSTRUCTIONS OWNERSHIP REGISTRATION CARD ONE (1) YEAR LIMITED WARRANTY EURO-PRO Operati ng LLC war rants this product to be free fro m defects in materia l and workman s.
TROUBLESHOOTING ADDITIONAL IMPORTANT SAFEGUARDS PROBLEM POSSIBLE REASONS & SOLUTIONS Iron does not heat Thermostat ready light goes On and Off Some odor or small particles come out of steam vents of new iron Iron does not steam Water droplets coming from steam vents • Iron should be plugged into a 120V AC elect rical outlet only.
GETTING TO KNOW YOUR IRON IRONING CHART Before using your 1500 Watt Iron, remove any labels, stickers or tags that may be attached to the body or soleplate of the iron. When turned on for the first time, your new iron may emit an odor for up to 10 minutes.
OPERATING INSTRUCTIONS USER MAINTENANCE INSTRUCTIONS STEAM IRONING Fig. 9 Fig. 2 All marked settings on the temperature dial can be used for dry ironing. Slide the variable steam control lever to the “0” position as shown in Figure 1. This will cut off the steam flow if water is in the tank.
OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS 2. Set the temperature dial to the "Max" position. Place the iron on its heel (on a stable, prot ected surface) and allow it to heat for approximately 2 minutes. 3. With the iron in a horizontal position, press the burst of steam button several times to prime the pump.
An important point after buying a device Shark GI465D (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Shark GI465D yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Shark GI465D - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Shark GI465D you will learn all the available features of the product, as well as information on its operation. The information that you get Shark GI465D will certainly help you make a decision on the purchase.
If you already are a holder of Shark GI465D, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Shark GI465D.
However, one of the most important roles played by the user manual is to help in solving problems with Shark GI465D. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Shark GI465D along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
