Instruction/ maintenance manual of the product SK 500 G2 Sennheiser
Go to page of 29
SK 500 G2 Instructions for use 33 ew500_SK.book Seite 33 Dienstag, 4. November 2003 4:02 16.
34 Thank you for choosing Sennheiser! W e have designed this product to give you reliable operation over many years. Over half a century of accumulated expertise in the design and manufacture of high-quality electro-acoustic equipment have made Sennheiser a world-leading company in this field.
35 Contents The SK 500 G2 bodypack transm itter ................................. 36 The channel bank system ..... ........................ ................... 36 Safety instructions ................ ........................... .......................
36 The SK 500 G2 bodypack transmitter The SK 500 G2 bodypack transmitter is part of the evolution wireless series ew 500 G2. With this series, Sennheiser offers high-quality state-of-the-art RF transmission systems with a high level of operational reliability and ease of use.
37 Safety instructions Never open an electronic unit! If units are opened by customers in breach of this instruction, the warranty becomes null and void. Use the unit in dry rooms only. Use a damp cloth for cleaning the unit. Do not use any cleansing agents or solvents.
38 Areas of application The transmitter can be combined with receivers of the ew 500 G2 series (EM 500 G2 rack-mount receiver or EK 500 G2 bodypack receiver). The receivers are available in the same five UHF frequency ranges and are equipped with the same channel bank system with factory-preset frequencies.
39 The operating controls Microphone/line input (MIC/LINE), 3.5 mm jack socket Antenna Red LED for operation and battery status indication (ON/LOW BAT) Yellow LED for audio peak (AF PE.
40 Indications and displays LC display panel Alphanumeric display “B.CH“ – appears when the channel bank and the channel number are displayed “MHz“ – appears when the frequency.
41 “MUTE” display The “MUTE” display appears on the display panel when the transmitter is muted (see “Muting the transmitter” on page 46). Modulation display The level display for audio signal “AF” shows the modulation of the transmitter.
42 Preparing the bodypack transmitter for use Inserting and replacing the batteries For powering the transmitter, two 1.5 V AA size batteries are required. Press the two unlocking buttons and open the battery compartment cover . Insert the two batteries as shown above.
43 displays, the transmission of transmitter battery status information to the rack-mount receivers and the switch-off thresholds at the end of the operating time are corrected correspondingly. Due to the missing sensor, individual rechargeable battery cells will not be identified as accupacks.
44 Positioning the microphones The ME 3 and ME 4 microphones are directional microphones, i.e. their sound inlet should always be directed towards the sound source (e.g. mouth). The ME 2 with omni-directional pick-up pattern picks up sound equally from all directions.
45 Using the bodypack transmitter Switching the transmitter on/off The transmitter can only be switched off when the standard display is shown on the di splay panel. When in the operating menu, briefly pressing the ON / OFF button will cancel your entry (ESC function) and return you to the standard display with the last stored settings.
46 Muting the transmitter The transmitter has a MUTE switch that noiselessly mutes the transmitter’s audio signal without switching the transmitter off. Set the MUTE switch to the position ’MUTE’. The “MUTE” display appears on the display panel.
47 The operating menu A special feature of the Sennheiser ew 500 G2 series is the similar, intuitive operation of transmitters and receivers. As a result, adjustments to the settings can be made quickly and “without looking” – even in stressful situations, for example on stage or during a live show or presentation.
48 W orking with the operating menu By way of example of the “ TUNE ” menu, this section describes how to use the operating menu. Af ter switching the transmitter on, the standard display is shown on the display panel. Getting into the operating menu Press the SET button to get from the standard display into the operating menu.
49 Storing a setting Press the SET button to store the setting. “STORED” appears on the display, indicating that the setting has been stored. The display then returns to the top menu level. With most menus, new settings become effective immediately without having to be stored.
50 Operating menu of the transmitter BANK Changing the channel bank BANK 1 BANK U SET Current channel bank / : 1...8, U (User Bank) SET : Stores the setting STORED STORED CHAN 1. 03 B.CH SET Current channel (display depends on "DISPL Y" setting) Changing the channel / : Channel 01.
51 DISPL Y PILOT Activating/deactivating the pilot tone transmission SET Pilot tone transmission activated or deactivated / : ON, OFF SET : Stores the setting PL T . ON ON PL T . OFF OFF LOCK Activating the lock mode SET SET Lock mode activated or deactivated LOC.
52 Adjustment tips for the operating menu Switching between channel banks – BANK Via the “ BANK ” menu, you can switch between the transmitter’s nine channel banks. Each of the channel banks “1” to “8” has up to 20 switchable channels that are factory-preset to a transmission frequency (see “The channel bank system” on page 36).
53 Use the / rocker button to select the desired transmission frequency. Transmission frequencies are tunable in 25-kHz steps within a switching bandwidth of 36 MHz max. For interm odulation-free frequencies, please refer to the enclosed frequency table.
54 Selecting the standard display – DISLPY Via the “ DISPL Y ” menu, you can select the standard display: Entering a name – NAME Via the “ NAME ” menu, you can enter a freely selectable name for the transmitter. You can, for example, enter the name of the performer for whom the adjustments have been made.
55 remains unchanged. Af ter the reset, the transmitter is restarted and the standard display is shown on the display panel. Activating/deactivating the pilot tone transmission – PILOT Via the “ PILOT ” menu, you can activate or deactivate the pilot tone transmisssion.
56 T roubleshooting Error checklist If problems occur that are not listed in the above table or if the problems cannot be solved with the proposed solutions, please contact your local Sennheiser agent for assistance.
57 Recommendations and tips ... for the ME 2 and ME 4 clip-on microphones y T o reduce level variations to a minimum when the user turns his or her head away from the microphone, attach the microphone as centrally as possible. y T o protect the microphone against excessive sweat/ moisture, avoid direct skin contact.
58 Care and maintenance Use a slightly damp cloth to clean the transmitter from time to time. Note: Do not use any cleansing agents or solvents. ew500_SK.
59 Specifications RF characteristics Modulation wideband FM Frequency ranges 518–554, 626–662, 740–776, 786–822, 830–866 MHz Transmission frequencies 8 channel banks with up to 20 factory-pr.
60 Microphones Connector assignment 3.5 mm jack plug : Polar diagrams and frequency response curves of microphones Polar diagram ME 3 Polar diagram ME 4 ME 2 MKE 2-ew ME 3 ME 4 Transducer Principle condenser condenser condenser condenser Sensitivity 20 mV/Pa 5.
61 Frequency response curve ME 2 Frequency response curve ME 3 Frequency response curve ME 4 Accessories ME 2 Clip-on microphone, condenser, omni-directional MKE 2 Clip-on microphone , black or beige,.
An important point after buying a device Sennheiser SK 500 G2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sennheiser SK 500 G2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sennheiser SK 500 G2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sennheiser SK 500 G2 you will learn all the available features of the product, as well as information on its operation. The information that you get Sennheiser SK 500 G2 will certainly help you make a decision on the purchase.
If you already are a holder of Sennheiser SK 500 G2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sennheiser SK 500 G2.
However, one of the most important roles played by the user manual is to help in solving problems with Sennheiser SK 500 G2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sennheiser SK 500 G2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
