Instruction/ maintenance manual of the product MX W1 Sennheiser
Go to page of 29
MX W1 digital wireless system Instruction manual.
.
1 Contents Important safety instructions .............. ............... .............. .. 2 MX W1 digital wireless earphone system .............. ........... 4 Delivery includes .................... ............... .............. ........... ........ 4 Product overview .
2 Important safety instructions The MX W1 has been manufactured according to the accepted rules of safety and current technology. However, there is still a danger of damage to equipment if the fol lowing general safety in structions are not complied with.
3 Safety instructions for Lithium-Ion rechargeable batter ies If abused or misused, rechargeable batteries may leak. In extreme cases, they may even present a Please understand that Sennheiser doe s not accept liabil ity for damage arising from abuse or misuse.
4 MX W1 digital wireless earphone system Thank you for purchasing MX W1 - Sennheiser's completely digital wireless earphone system . We trust that you will enjoy using it and that it will satisfy your expectations. Th e M X W 1 i s si m p le t o o pe r a t e.
5 Product overview Earphones Transmitter Twist-to-fit pad Speaker LED (orange/blue) Operation/pairing butto n of the earphone 2.5 mm charging jack Battery compartment Operation/p airing button of the transmitter Reset button LED (orange/blue) 2.
6 Docking station LED indications of the devices Putting the MX W1 into operation Charging the MX W1 Charge the rechargeable batteries of all MX W1 devices for 3 hours before first use. When the battery is almost flat, the LED , or flashes orange.
7 Charging the devices To charge the devices (sim ulta neously or separately): 왘 Connect the charging cable to the power supply unit . 왘 Connect the suitable country adaptor t o the power supply unit .
8 왘 Plug the country adaptor into a wa ll socket. The batteries are being charged. The corresponding LEDs light up. 왘 Charge the rechargeable batteries until the LEDs go off (approx. 2 hou rs). Note: – The transmitter has its own built -in rechargeable battery.
9 Associating the earphones to the transmitter (Pairin g) The MX W1 earphones and transmitter are already paired on delivery. To enable wireless transmission, both the earphones and t he transmitter have to recogni ze each other: 1. Enrollmen t mode After switch-on, a suitab le device is sear ched.
10 Associating a second pair of earphones to the transmitter With one transmitter you can associate up to two pairs of earphones. If you want to use another pair of earphones, you have to pair your transm itter and the new earphones: 왘 Switch the new earphones off (see page 14).
11 Note: The distance between transmitter and earphones should not exceed 1 m during associ ation. Associating the earphones to Kleer compatible devices MX W1 is fully compatible to Kleer wireless s tandard.
12 Setting up you r MX W1 for usage Fixing the transmitter to your audio device Fix the transmitter with the help of: •t h e f a b r i c s t r a p • or o ne of the rubber bands (see illustration). Connecting the transmitter to your audio device You can connect th e transmitter to an MP3 player or any audio de vice with a 3.
13 Adjusting the earphones to your ears Sennheiser’s twist-to-fit system and comfortable earpads allow for the best custom fit enabli ng you to enjoy seamless hi gh fidelity stereo sound. The pe rceived sound qu ality of the earphones depends to a large exte nt on a correct fit.
14 Using the MX W1 To switch the system on, proceed as follows: 1. Switch your audio device on. 2. Switch the earphones on (see following chapter). 3. Switch the transmitter on (see page 15). 4. Put the earphones on (see page 16). You w ill hear the sound from your sound source.
15 Note: – When you insert the earphones into the docking station, the earphones automatically switch off. – If there is no transmitter in enrollment mod e for at least 5 minutes, the earphones automatically switch off.
16 Putting on the earphones 왘 Check the R (right) an L (lef t) marks on the earphones to identify them and put on the earphones as shown in the illustra tion above. Danger of hearing damage! Listening at high volume lev els for long periods can lead to permanent hea ring defects.
17 Care and maintenance Cleaning the devices For reasons of hyg iene, clean your Sen nheiser products regularly. 왘 Before cleaning, disconnect the devices f rom the mains.
18 Replacing the earphones’ rechargeable batteries 왘 Slightly lift the end of the caps and slide the caps out of the guide rails. 왘 Insert the new rechargeable batteries as shown. Observe correct polarity when inserting the batteries. 왘 Replace the caps and slide them onto the guide rails until it clicks audi bly.
19 Get the most out of your Sennheiser MX W1! Your Sennheiser MX W1 uses the latest digital wireless transmi ssion tech nology. T his tech nology of fers high transmission quali ty and reliability but.
20 T roubleshooting Problem Possible cause Possible solution No operation indication Battery is flat Recharge th e battery (see page 6, page 17) No sound Jack plug connection is incorrect Check the co.
21 Resetting the transmitter to the factory sett ings If a problem occurs that is not li sted in th e above table or if the problem cannot be so lved with the propose d solutions, please contact your local Sennheiser agent for assistance.
22 Accessories and spare parts The following accessories are av ailable from your authorized Sennheiser dealer: Cat. No. Accessory/Spare part 525766 Carrying case 525767 MX W1-C dockin g station 52576.
23 Specifications System Transmitter Earphones Modulation MSK Digital Carrier frequencies 2.4 – 2.48 GHz Range approx. 10 m in open area Power supply unit with country adaptors Input: 100 – 240 V AC, 50 /60 Hz, Output: 5 V DC/0.5 A (x 2) Operating temperature 0 – 40 °C Audio connection 3.
24 Docking station “kleer” wireless technology Manufacturer declarations Warranty 2 years Declaration of Conformity This equipment is in compliance with the essential requi rements and other relev.
25 Statements regarding FCC and industry Canada This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subjec t to the following two conditions: (1) this .
26 Meet the requirements for: USA: FCC ID: DMOMXW1T DMOMXW1R Canada: IC: 2099A-MXW1T 2099A-MXW1R Europe: Australia & New Zealand: Singap ore: Russia: Complies with IDA Standards DB100582.
Sennheiser Consumer Electronic s Gm bH (Singapore Branch) 96 Robinson Road, #16-01/04, Singapore 068899 Phone: +65 64116911 Fax: +65 64380476 Sennheiser electronic GmbH & Co. KG (EU Representative) Am Labor 1, 30900 Wedemark, Germany Phone: +49 (5130) 600 0 Printed in China Fax: +49 (5130) 600 300 Publ.
An important point after buying a device Sennheiser MX W1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sennheiser MX W1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sennheiser MX W1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sennheiser MX W1 you will learn all the available features of the product, as well as information on its operation. The information that you get Sennheiser MX W1 will certainly help you make a decision on the purchase.
If you already are a holder of Sennheiser MX W1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sennheiser MX W1.
However, one of the most important roles played by the user manual is to help in solving problems with Sennheiser MX W1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sennheiser MX W1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
