Instruction/ maintenance manual of the product Y182 Seiko
Go to page of 18
You are now the proud owner of a SEIKO Analogue Quartz Watch Cal. Y182. For best results, please read the instructions in this booklet carefully before using your SEIKO Analogue Quartz Watch. Please keep this manual handy for ready reference. Siete ora in possesso di un orologio SEIKO Analogico al Quarzo Cal.
English 2 ENGLISH CONTENTS Page FEATURES .................................................................................................................. 3 DISPLAY AND CROWNS/BUTTONS ..................................................................
English 3 FEATURES SEIKO ANALOGUE QUARTZ Cal. Y182 TIME/CALENDAR STOPWATCH ● Hour & minute hands with small second hand ● Date displayed in numerals ● Measures up to 30 minutes in 1/5 second increments. ● Can measure repeatedly up to 6 hours.
English 4 DISPLAY AND CROWNS/BUTTONS There are three buttons and two crowns. STOPWATCH 1/5 second hand STOPWATCH minute hand Minute hand (MAIN TIME) ALARM 1 2 3 9 10 11 5 25 30 10 20 MIN .
English 5 Pull out to first click . Turn clockwise until the date for the previous day appears. Pull out to second click and turn until the desired date appears. Push back in to normal position . 1 2 3 4 ▼ ▼ ▼ ➠ 3 ➠ 4 Date 1 Do not set the date between 9:00 p.
English 6 Pull out to second click when Second hand is at the 12 o’clock position. Turn to set Hour and Minute hands. Push back in to normal position in accordance with a time signal. Minute hand TIME SETTING 1 When setting Hour hand, check that AM/PM is correctly set.
English 7 ALARM ● Alarm time is set on a 12-hour basis. ● ALARM hands move independently of MAIN TIME hands. Minute hand (MAIN TIME) 1 Pull out to second click . Turn clockwise or counterclockwise to set ALARM hands to the current time (MAIN TIME).
English 8 2 Alarm time setting ▼ Press to set ALARM hands to the desired alarm time. ▼ Push back in to normal posi- tion . Pull out to first click . * Once ALARM hands are adjusted to the main time, alarm time setting can be made only by following the procedure below.
English 9 ALARM ENGAGEMENT/DISENGAGEMENT • Alarm engagement • Alarm disengagement Push back in to normal position . Pull out to first click . Current time 1 Alarm rings at the designated time for 20 seconds. * To stop it manually, press Button A, B or C , or push CROWN 2 back in to normal position.
English 10 ● Stopwatch measures up to 30 minutes in 1/5 second increments. ● After 30 minutes, it will start counting again from “0” repeatedly up to 6 hours. STOPWATCH STOPWATCH minute hand • Before using the stopwatch: • Check that CROWNS 1 and 2 are set at normal position .
English 11 1 Standard measurement START STOP RESET START SPLIT RELEASE STOP SPLIT * Measurement and release of split time can be repeated by pressing Button B . RESET 3 Split time measurement 2 Accumulated elapsed time measurement START RESTART STOP STOP RESET * Restart and stop of stopwatch can be repeated by pressing Button A .
English 12 START RESET 4 Measurement of two competitors 2ND COMPETITOR FINISHES FINISH TIME OF 1ST COMPETITOR FINISH TIME OF 2ND COMPETITOR 1 If CROWN 1 is pulled out to second click, STOPWATCH hands are reset to “0” position. 2 If CROWN 2 is pulled out to first or second click, STOPWATCH hands are reset to “0” position.
English 13 TACHYMETER (for models with tachymeter scale on the dial) * Tachymeter scale can be used only when the time required is less than 60 seconds.
English 14 To measure the hourly rate of operation Use the stopwatch to measure the time required to complete 1 job. 1 Tachymeter scale indicated by STOPWATCH second hand gives the average number of jobs ac- complished per hour.
English 15 ADJUSTING THE HAND POSITION ▼ Pull out to second click . Press repeatedly to reset STOPWATCH minute hand to the 12 o’clock position. ▼ Press repeatedly to reset STOPWATCH second hand to the 12 o’clock position. ▼ Push back in to normal posi- tion .
English 16 RESETTING THE BUILT-IN IC ● In case any of the hands should move improperly, follow the procedure below to adjust the hand movement. Pull out to second click . AND Press simultaneously. Push back in to normal posi- tion . ▼ ▼ 5 25 30 10 20 MIN.
English 17 BATTERY LIFE INDICATOR ● When the battery nears its end, the small second hand moves at two-second intervals instead of normal one-second intervals to indicate that the battery needs to be replaced with a new one. * If the alarm is used while the second hand is moving at two-second intervals, the watch may stop operating.
English 18 CAUTION ● Never short-circuit, heat or otherwise tamper with the battery, and never expose it to fire. The battery may burst, become very hot or catch fire. ● The battery is not rechargeable. Never attempt to recharge it, as this may cause battery leakage or damage to the battery.
An important point after buying a device Seiko Y182 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Seiko Y182 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Seiko Y182 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Seiko Y182 you will learn all the available features of the product, as well as information on its operation. The information that you get Seiko Y182 will certainly help you make a decision on the purchase.
If you already are a holder of Seiko Y182, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Seiko Y182.
However, one of the most important roles played by the user manual is to help in solving problems with Seiko Y182. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Seiko Y182 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
