Instruction/ maintenance manual of the product 7T92 Seiko
Go to page of 16
INSTRUCTIONS (P. 3) BEDIENUNGSANLEITUNG (S. 17) INSTRUCTIONS (P. 31) ISTRUZIONI (P. 45) INSTRUCCIONES (P. 60) INSTRUÇÕES (P. 74) 用法説明 (88 頁 ) Cal.
2 English You are now the proud owner of a SEIKO Analogue Quartz Watch Cal. 7T92. For best results, please read the instructions in this booklet carefully before using your SEIKO Analogue Quartz Watch. Please keep this manual handy for ready reference.
3 English ENGLISH CONTENTS Page SETTING THE TIME AND ADJUSTING THE STOPWATCH HAND POSITION ........ 5 SETTING THE DATE ................................................................................................ 8 STOPWATCH .......................
4 English CAL. 7T92 A B a b c CROWN Hour hand Minute hand STOPWATCH 1/20-second hand ■ TIME/CALENDAR ■ STOPWATCH Measures up to 12 hours in 1/20 second increments.
5 English SETTING THE TIME AND ADJUSTING THE STOPWATCH HAND POSITION 6 Minute hand Hour hand CROWN Pull out to second click when the second hand is at the 12 o’clock position.
6 English 1. When the stopwatch is or has been measuring or is stopped, if the crown is pulled out to the second click, it will automatically reset the STOPWATCH hands to “0”.
7 English Press for 2 seconds to select STOPWATCH hand(s) to be adjusted. STOPWATCH second hand ▲ ▲ ▲ CROWN ● Selection of the hand(s) can be made in the following order by pressing button for 2 seconds. A STOPWATCH 1/20-second hand STOPWATCH hour and minute hands * The selected hand(s) turn(s) a full circule.
8 English ● Before setting the date, be sure to set the main time. 6 ➠ ➠ CROWN Pull out to first click. ▼ Turn clockwise until the desired date appears. ▼ Push back in to normal position. Date 1. It is necessary to adjust the date at the end of February and 30-day months.
9 English STOPWATCH ● The stopwatch can measure up to 12 hours in 1/20-second increments. ● When the measurement reaches 12 hours, the stopwatch automatically stops counting. A B STOPWATCH second hand STOPWATCH second hand [ Ex.: 2 hours, 30 minutes and 10.
10 English Accumulated elapsed time measurement A START A STOP RESTART ▼ ▼ A STOP RESET B ▼ A ▼ * Restart and stop of the stopwatch can be repeated by pressing button A.
11 English Split time measurement A START SPLIT ▼ ▼ A STOP RESET B ▼ ▼ BB * Measurement and release of split time can be repeated by pressing button B.
12 English TACHYMETER (for models with tachymeter scale on the dial) ● Tachymeter scale can be used only when the time required is less than 60 seconds. To measure the hourly average speed of a vehicle Use the stopwatch to determine how many seconds it takes to go 1 km or 1 mile.
13 English To measure the hourly rate of operation Use the stopwatch to measure the time required to complete 1 job. 1 Tachymeter scale indicated by STOPWATCH second hand gives the average number of jobs ac- complished per hour.
14 English BATTERY CHANGE The miniature battery which powers your watch should last approximately 3 years . However, because the battery is inserted at the factory to check the function and performance of the watch, its actual life once in your possession may be less than the specified period.
15 English ● Do not remove the battery from the watch. ● If it is necessary to take out the battery, keep it out of the reach of children. If a child swallows it, consult a doctor immediately. WARNING ● Never short-circuit, heat or otherwise tamper with the battery, and never expose it to fire.
16 English SPECIFICATIONS 1 Frequency of crystal oscillator .................. 32,768 Hz (Hz = Hertz … Cycles per second) 2 Loss/gain (monthly rate) ............................ ± 15 seconds at normal temperature range (5 ° C ~ 35 ° C) (41 ° F ~ 95 ° F) 3 Operational temperature range .
An important point after buying a device Seiko 7T92 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Seiko 7T92 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Seiko 7T92 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Seiko 7T92 you will learn all the available features of the product, as well as information on its operation. The information that you get Seiko 7T92 will certainly help you make a decision on the purchase.
If you already are a holder of Seiko 7T92, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Seiko 7T92.
However, one of the most important roles played by the user manual is to help in solving problems with Seiko 7T92. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Seiko 7T92 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
