Instruction/ maintenance manual of the product 7T62 Seiko
Go to page of 19
INSTRUCTIONS (P. 3) BEDIENUNGSANLEITUNG (S. 20) INSTRUCTIONS (P. 37) ISTRUZIONI (P. 54) INSTRUCCIONES (P. 71) INSTRUÇÕES (P. 88) 用法説明 (105 頁 ) Cal.
2 English You are now the proud owner of a SEIKO Analogue Quartz Watch Cal. 7T62. For best results, please read the instructions in this booklet carefully before using your SEIKO Analogue Quartz Watch. Please keep this manual handy for ready reference.
3 English ENGLISH CONTENTS Page SETTING THE TIME AND ADJUSTING THE STOPWATCH HAND POSITION ........ 5 SETTING THE DATE ................................................................................................ 9 STOPWATCH .......................
4 English CAL. 7T62 6 A B a b c CROWN Hour hand Minute hand STOPWATCH 1/5-second hand STOPWATCH minute hand ■ TIME/CALENDAR ■ SINGLE-TIME ALARM Can be set to ring only once at a designated time within the coming 12 hours. ■ STOPWATCH Measures up to 60 minutes in 1/5 second increments.
5 English SETTING THE TIME AND ADJUSTING THE STOPWATCH HAND POSITION 6 Minute hand Hour hand CROWN Pull out to second click when the second hand is at the 12 o’clock position.
6 English 6 1. When the stopwatch is or has been measuring, if the crown is pulled out to the second click, it will automatically reset the STOPWATCH hands to “0”. 2. If the alarm has been set and the crown is pulled out to the second click, the ALARM hands will turn to indicate the current time.
7 English 3. STOPWATCH HAND POSITION ADJUSTMENT 6 STOPWATCH minute hand B ▼ ▼ A Press for 2 seconds. * STOPWATCH minute hand turns a full circle. Press repeatedly to set STOPWATCH minute hand to the “0” position. A Press for 2 seconds. B Press repeatedly to set STOPWATCH 1/5-second hand to the “0” position.
8 English ▼ ▼ ● ALARM and STOPWATCH hands can be readjusted in the following order by pressing button for 2 seconds. A STOPWATCH minute hand ▲ STOPWATCH 1/5-second hand ▲ ALARM hands * ALARM hands advance 12 hours. * STOPWATCH minute hand turns a full circle.
9 English SETTING THE DATE ● Before setting the date, be sure to set the main time. 6 ➠ ➠ CROWN Pull out to first click. ▼ Turn clockwise until the desired date appears. ▼ Push back in to normal position. Date 1. It is necessary to adjust the date at the end of February and 30-day months.
10 English STOPWATCH ● The stopwatch can measure up to 60 minutes in 1/5-second increments. ● After 60 minutes, it will start counting again from “0” repeatedly up to 12 hours. 6 A B ✩ Before using the stopwatch, be sure to check that the crown is set at the normal position and that the STOPWATCH hands are reset to the “0” position.
11 English Accumulated elapsed time measurement A START A STOP RESTART ▼ ▼ A STOP RESET B ▼ A ▼ * Restart and stop of the stopwatch can be repeated by pressing button A. Split time measurement A START SPLIT ▼ ▼ A STOP RESET B ▼ ▼ BB * Measurement and release of split time can be repeated by pressing button B.
12 English 6 SINGLE-TIME ALARM ● The alarm can be set to ring only once at a designated time within the coming 12 hours. ● The alarm time can be set in one minute increments. ✩ Before using the alarm, check that the ALARM hands are adjusted to the current time.
13 English ● HOW TO STOP THE ALARM At the designated time the alarm rings for 20 seconds, and it is automatically disengaged as it stops. To stop it manually, press button A or B. 1. The single-time alarm cannot be set for a time more than 12 hours ahead of the current time.
14 English ● HOW TO CANCEL THE ALARM TIME YOU HAVE SET 6 ➠ ➠ B CROWN Pull out to first click. B ▼ ▼ Press and hold until ALARM hands stop and indicate the cur- rent time. CROWN Push back in to normal posi- tion. * To correct the alarm time you have set, follow the procedure described in “ALARM TIME SETTING”.
15 English TACHYMETER (for models with tachymeter scale on the dial) ● Tachymeter scale can be used only when the time required is less than 60 seconds. To measure the hourly average speed of a vehicle Use the stopwatch to determine how many seconds it takes to go 1 km or 1 mile.
16 English To measure the hourly rate of operation Use the stopwatch to measure the time required to complete 1 job. 1 Tachymeter scale indicated by STOPWATCH second hand gives the average number of jobs ac- complished per hour.
17 English BATTERY CHANGE The miniature battery which powers your watch should last approximately 3 years . However, because the battery is inserted at the factory to check the function and performance of the watch, its actual life once in your possession may be less than the specified period.
18 English ● Do not remove the battery from the watch. ● If it is necessary to take out the battery, keep it out of the reach of children. If a child swallows it, consult a doctor immediately. WARNING ● Never short-circuit, heat or otherwise tamper with the battery, and never expose it to fire.
19 English SPECIFICATIONS 1 Frequency of crystal oscillator .................. 32,768 Hz (Hz = Hertz … Cycles per second) 2 Loss/gain (monthly rate) ............................ ± 15 seconds at normal temperature range (5 ° C ~ 35 ° C) (41 ° F ~ 95 ° F) 3 Accuracy of the alarm .
An important point after buying a device Seiko 7T62 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Seiko 7T62 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Seiko 7T62 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Seiko 7T62 you will learn all the available features of the product, as well as information on its operation. The information that you get Seiko 7T62 will certainly help you make a decision on the purchase.
If you already are a holder of Seiko 7T62, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Seiko 7T62.
However, one of the most important roles played by the user manual is to help in solving problems with Seiko 7T62. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Seiko 7T62 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
