Instruction/ maintenance manual of the product E-941SA-600PQ SECO-LARM USA
Go to page of 8
NOTE: Products with a model number that en ds with “Q” or hav e a round green “Q” stick er represent RoH S compliant pro ducts. Electromagnetic Lock E- 94 1SA- 600 600 - lb. (272kg) E- 94 1SA-1 200 1200 -lb. (545kg) With LED, Bond S ensor E- 94 1SA- 600 PQ 600 - lb.
SECO-L ARM ELECTROMAGNETIC LOCK 2 SECO-LARM U.S.A., Inc. Table of Contents: Introduction: Features: The E-941SA series of electromagnetic locks is the ideal way to secure a door against unauthorized entry. When power is applied to the electromagnetic lock, it creates an extremely strong m agnetic field.
SECO-L ARM ELECTROMAGNETIC LOCK SECO-LARM U.S.A., Inc. 3 “ L ” -Bracket and “ Z ” -Bracket Short self- tapping screws Electromagnet Mounting plate Sexnut bolt Door spacer Armature screw Tamper.
SECO-L ARM ELECTROMAGNETIC LOCK 4 SECO-LARM U.S.A., Inc. Door Frame Door Template 1. Read this installation manual thor oughly. A clear understanding of the prod uct and this manual will make installation m uch easier . 2. The electromagnetic lock is de signe d for indo or use ONLY.
SECO-L ARM ELECTROMAGNETIC LOCK SECO-LARM U.S.A., Inc. 5 7. Put a rubber wash er between the two metal washers, and place them over the armature screw betwe en the armature plate and the door. This allows the plate to pivot around t he screw to com pensate for door misalignment.
SECO-L ARM ELECTROMAGNETIC LOCK 6 SECO-LARM U.S.A., Inc. 14. Cut the wires so th ey are long enough to c onnect with the terminal bl ock. Set the voltage usi ng the selection jumpers b ased on your input volt age.
SECO-L ARM ELECTROMAGNETIC LOCK SECO-LARM U.S.A., Inc. 7 Wire Length 25ft. 50ft. 75ft. 100ft. 150ft. 200ft. 250ft. 300ft. 400ft. 500ft. 1000ft. Wire Gauge @ 500mA 20 18 18 18 16 14 14 12 10 -- -- Wire Length 25ft. 50ft. 75ft. 100ft. 150ft. 200ft. 250ft.
SECO-L ARM ELECTROMAGNETIC LOCK 8 SECO-LARM U.S.A., Inc. No relay output Troubleshooting: LIFETIME LIMIT ED WARRANTY This SEC O-LARM product is warra nted against defec ts in material and work manship while used in norm al service for the lifetim e of the product.
An important point after buying a device SECO-LARM USA E-941SA-600PQ (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SECO-LARM USA E-941SA-600PQ yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SECO-LARM USA E-941SA-600PQ - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SECO-LARM USA E-941SA-600PQ you will learn all the available features of the product, as well as information on its operation. The information that you get SECO-LARM USA E-941SA-600PQ will certainly help you make a decision on the purchase.
If you already are a holder of SECO-LARM USA E-941SA-600PQ, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SECO-LARM USA E-941SA-600PQ.
However, one of the most important roles played by the user manual is to help in solving problems with SECO-LARM USA E-941SA-600PQ. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SECO-LARM USA E-941SA-600PQ along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
