Instruction/ maintenance manual of the product SK-1011-SQ SECO-LARM
Go to page of 5
Digital Access Keypad Manual SECO-LARM U.S.A., Inc. MANUAL SK-101 1-SQ Digital Access Keypad with 5A Relay Output MT_08Keypad3i.pmd ® PIHAK1 SECO-LARM ® U.S.A., Inc. 16842 Millikan Avenue, Irvine, CA 92606 Tel: 800-662-0800 / 949-261-2999 Fax: 949-261-7326 Website: www .
Digital Access Keypad Manual SECO-LARM U.S.A., Inc. Digit al Access Keypad Manual T ABLE OF CONTENTS Introduction ................................................................................................................ 2 Unique features ......
Digital Access Keypad Manual SECO-LARM U.S.A., Inc. Digit al Access Keypad Manual (DEFAU L T : ) Power: • Operation voltage -- 12-24 V olts AC/DC. No jumper needed to set voltage. • Stand-by current drain -- 10mA @12VDC. • Active current drain (press keypad key) -- Under 30mA.
Digital Access Keypad Manual SECO-LARM U.S.A., Inc. Digit al Access Keypad Manual _____________________________________________________________________________________ ________________________________.
— 6 — — 5 — Note: copy this sheet to use for your installations. EK -1 1 2 1SQxx - User Control Char t Relay Output #1: Output: Shunt / Momentary ( ____ secs.
An important point after buying a device SECO-LARM SK-1011-SQ (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SECO-LARM SK-1011-SQ yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SECO-LARM SK-1011-SQ - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SECO-LARM SK-1011-SQ you will learn all the available features of the product, as well as information on its operation. The information that you get SECO-LARM SK-1011-SQ will certainly help you make a decision on the purchase.
If you already are a holder of SECO-LARM SK-1011-SQ, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SECO-LARM SK-1011-SQ.
However, one of the most important roles played by the user manual is to help in solving problems with SECO-LARM SK-1011-SQ. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SECO-LARM SK-1011-SQ along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
