Instruction/ maintenance manual of the product MVE-AT11-01NQ Seco-Larm
Go to page of 4
Note: Products with mod el numbers that end wi th “Q” or that have a round green “Q ” sticker are RoHS compli ant. Extenders for HDMI over Single Cat5e/6 Manual Extend HDMI signals up to 2.
ENFORCER Enha nced Ext enders for HDMI ® over Sin gle Cat5e/6 2 SECO-L ARM U.S.A., Inc. Introduction: The ENFORCER Enhanced Exte nders for HDMI over Single Cat5 e/6 extend the range of HDMI signals by using an a ctive transmitte r and receiver to sen d video and audio over a single Cat5e/6 cable.
ENFORCER Enha nced HD MI ® Extenders over Single Cat5e/6 SECO-L ARM U.S.A., Inc. 3 Overview: Back View Front View MVE-AT11-01NQ Top View Front View MVE-AT11-W1NQ Top View Installation: 1. Determine where the transmitter and r eceiver will be wired as well as how much Cat5e/6 cab le will be necessary.
ENFORCER Enha nced Ext enders for HDMI ® over Sin gle Cat5e/6 4 SECO-L ARM U.S.A., Inc. HDMI device does not function correctly Use T568-B wiring st andard Make sure the exte nder is powered on bot h sides. Make sure the source and the display are powered.
An important point after buying a device Seco-Larm MVE-AT11-01NQ (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Seco-Larm MVE-AT11-01NQ yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Seco-Larm MVE-AT11-01NQ - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Seco-Larm MVE-AT11-01NQ you will learn all the available features of the product, as well as information on its operation. The information that you get Seco-Larm MVE-AT11-01NQ will certainly help you make a decision on the purchase.
If you already are a holder of Seco-Larm MVE-AT11-01NQ, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Seco-Larm MVE-AT11-01NQ.
However, one of the most important roles played by the user manual is to help in solving problems with Seco-Larm MVE-AT11-01NQ. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Seco-Larm MVE-AT11-01NQ along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
