Instruction/ maintenance manual of the product Enforcer RF Receivers SK-910R SECO-LARM
Go to page of 4
ENF O R CER ® SK -910 SERIES RF RECEIVERS SECO -LARM ® Model SK -910R ............... One - channel receiver , 315MHz SK -910RL ............. L ow -voltage, one -channel receiver , 315MHz SK -910R2 ............. T wo -channel receiver , 315MHz SK -910R -4 .
System These RF receivers are compatible with both code hopping and fixed-code transmitters (see page 4 of this manual for a list of compatible transmitters). They can be used for a variety of applications, such as allowing the same transmitter to arm/disarm a vehicle alarm and open/close a garage door opener .
Mode Switch Operation (one per channel) • Learn mode — P ress and hold the switch for three seconds. • Clear memory — P ress three seconds, then when the LED starts flashing, press again for three seconds to delete all previously learned codes.
SECO -LARM ® U .S.A., INC. 16842 Millikan A venue Irvine, CA 92606 T elephone (800) 662-0800 (949) 261-2999 The SECO-LARM policy is one of continual development and improvement. For this reason, SECO-LARM reserves the right to change specifications without further notice.
An important point after buying a device SECO-LARM Enforcer RF Receivers SK-910R (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SECO-LARM Enforcer RF Receivers SK-910R yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SECO-LARM Enforcer RF Receivers SK-910R - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SECO-LARM Enforcer RF Receivers SK-910R you will learn all the available features of the product, as well as information on its operation. The information that you get SECO-LARM Enforcer RF Receivers SK-910R will certainly help you make a decision on the purchase.
If you already are a holder of SECO-LARM Enforcer RF Receivers SK-910R, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SECO-LARM Enforcer RF Receivers SK-910R.
However, one of the most important roles played by the user manual is to help in solving problems with SECO-LARM Enforcer RF Receivers SK-910R. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SECO-LARM Enforcer RF Receivers SK-910R along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
