Instruction/ maintenance manual of the product SR10095 Sears
Go to page of 4
INSTALLATION INSTRUCTIONS FOR YOUR NEW FREE-STANDING ELECTRIC RANGE Before you begin - Read these instructions completely and carefully. IMPORTANT - Save these instrucUons for local Inspector's use. IMPORTANT - OBSERVE ALL GOVERNING CODES AND ORDINANCES.
(Stability device instructions continued...) 2. If the bracket side of the range Is adjacent to s cabinet, place the bracket against beck wall and cabinet as shown In Figure 1. If there Is no adjacent cabinet, determine where the location of the range side (painted outside panel) will be.
PREPARATION Remove all tape and packaging. Remove clear plastic film that covers some parts (around glass oven doors, side trim) and any tape or packaging from inside the oven, Remove the accessory pack from the oven. Check to see if any range parts have come loose during shipping.
THREE-WIRE CORD CONNECTION KIT Remove the screws on the junction block studs. Install the thrse-wlre cord and the strain relief In the hole In the connection plate. Connect the red and black leads to the outer terminals and the white lead to the center terminal.
An important point after buying a device Sears SR10095 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sears SR10095 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sears SR10095 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sears SR10095 you will learn all the available features of the product, as well as information on its operation. The information that you get Sears SR10095 will certainly help you make a decision on the purchase.
If you already are a holder of Sears SR10095, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sears SR10095.
However, one of the most important roles played by the user manual is to help in solving problems with Sears SR10095. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sears SR10095 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
