Instruction/ maintenance manual of the product Range Sears
Go to page of 18
i ¸ Record Your Model & Serial Numbers ............................................. Cover IMPORTANT SAFETY INSTRUCTIONS .................................................... 2-4 Grounding Instructions .............................................
IMPORTANT SAFETY INSTRUCTIONS Read all instructions before using this appliance. Save these instructions for future reference. This guide contains important safety symbols and instructions. Please pay special attention to these symbols and follow all instructions given.
IMPORTANT SAFETY INSTRUCTIONS • Storage in or on Appliance---Flammable materials should not be stored in an oven, near surface burners or in the broiler drawer. This includes paper, plastic and cloth items, such as cookbooks, plasticware and towels, as well as flammable liquids.
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT INSTRUCTIONS FOR USING YOUR OVEN • Use Care When Opening Door--Stand to the side of the range when opening the door of a hot oven. Let hot air or steam escape before you remove or replace food in the oven. • Keep Oven Vent Ducts Unobstructed.
Setting the Clock and Minute Timer (some models) h_R A C c_c_ B n.,._n Your model maybe equipped with the clock and minute timer shown below. To set the clock and minute timer, follow these instructio.
Flame Size Never extend the flame beyond the outer edge of the utensil. A higher flame simply wastes heat and energy, and increases your risk of being burned by the flame. For most cooking, start on the highest control setting and then turn to a lower one to complete the process.
Setting Surface Controls Typical Knobs Each burner lights automatically from either an electric ignitor or standing pilot, depending on your model. Standing pilots must be lit initaly. Refer to your installation instructions for instructions on lighting the standing pilot.
Before Setting Oven Controls Oven Vent Location The oven is vented below the backguard. When the oven is on, warm air is released through the vents. This venting is necessary for proper air circulation in the oven and good baking results. Vent Arranging Oven Racks (Some models may have one rack.
Setting Oven Controls DO NOT use the broiler drawer for storage. Items placed in the broiler drawer will catch fire. Fj31=J_r_'_] Should a broil fire occur, leave the broiler drawer closed and turn the oven off. If the fire continues, throw baking soda on the fire or use a fire extinguisher.
Oven Cleaning Follow these cleaning precautions: Allow the oven to cool before cleaning. Wear rubber gloves when cleaning the appliance manually. REMOVE SPILLOVERS AND HEAVY I SOILING AS SOON AS POSSIBLE. REGULAR CLEANINGS WILL REDUCE [ THE NUMBER OF MAJOR CLEANINGS LATER.
General Cleaning Cleaning Various Parts of Your Range Before cleaning any part of the range, be sure all controls are turned OFF and the range is COOL. REMOVE SPILLOVERS AND HEAVY SOILING AS SOON AS POSSIBLE. REGULAR CLEANINGS WILL REDUCE THE NUMBER OF MAJOR CLEANINGS LATER.
General Cleaning (continued) When lowering the top, grasp the sides with fingertips only. Be careful not to pinch fingers. Also, DO NOT drop or bend the rangetop iwhen raising or lowering. This could damage the surface. DO NOT turn the burners on when the cooktop is raised for cleaning.
General Cleaning (continued) The door is heavy. For safe, temporary storage, lay the door flat with the inside of the door facing down. Liftdoor straight off 2 doorhinges To Remove and Replace Oven Door To Remove Oven Door 1. Open the door. 2. Remove screws located on the inside of the oven door near the hinges (one on each side).
Changing Oven Light (some models) _lr_Be sure the range is unplugged and all parts are COOL before replacing the surface or oven lights. Wear a leather-faced glove for protection against possible broken glass. To Change the Oven Light (some models) 1.
Avoid Service Checklist OCCURRENCE Beforeyou call for service, review this list. It may save you time and expense. The list includes common occurrences that are not the result of defective workmanship or materials in this appliance. POSSIBLE CAUSE/SOLUTION Range is not level.
Entire appliance does not operate. Make sure cord/plug is plugged securely into outlet. Service wiring not complete. Contact servicer or dealer. Electrical power outage. Check house lights to be sure. Call your local electric company for service. Surface burners can be _it manually.
Range Warranty Full One Year Warranty On The Functioning Of All Parts Except Glass Parts tf, within one year from the date of installation, any part, other than a glass part, fails to function properly due to a defect in material or workmanship, Sears will repair or replace it, free of charge.
For the repair or replacement parts you need Call 7 am-7 pro, 7 days a week 1-800-366-PART (1-800-366-7278) For in-home major brand repair service Call 24 hours a day, 7 days a week 1-800-4-MY-HOME&qu.
An important point after buying a device Sears Range (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sears Range yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sears Range - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sears Range you will learn all the available features of the product, as well as information on its operation. The information that you get Sears Range will certainly help you make a decision on the purchase.
If you already are a holder of Sears Range, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sears Range.
However, one of the most important roles played by the user manual is to help in solving problems with Sears Range. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sears Range along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
