Instruction/ maintenance manual of the product 580.768050 Sears
Go to page of 30
Operators Manual [CRAFTSMAN" I 7.8 Horsepower 3000 PSI 2.5 GPM HIGH PRESSURE WASHER CLEANING SYSTEM Model No. 580.768050 HOURS: Mon.- FH. 8 a.m. to 5 p.m. (CST) CAUTION: Before using this product, read this manual and follow all its Safety Rules and Operating Instructions.
Warranty ................................ 2 Safety Rules ........................... 2--3 Assembly ............................... 4 Operation ............................. 5-9 Maintenance ......................... 10-15 Storage ......................
• The high pressure equipment is designed to be used with Sears authorized parts only. If you use this equipment with parts that do not comply with minimumspecifications, the user assumes all risks and liabilities. • Some chemicals or detergentsmay be harmful if inhaled or ingested, causing severe nausea, fainting or poisoning.
CARTON CONTENTS The following parts are shipped loose with your cleaning system: • Main Unit -- cleaning system with wheels, chemical tanks, guide handle.
KNOW YOUR HIGH CLEANING SYSTEM Read this owner's manual and safety rules before operating your cleaning system. Compare the illustrations with your cleaning system to familiarize yourselfwith the locations of various controls and adjustments.
HOW TO USE YOUR CLEANING SYSTEM Read these instructions and learn how to use your cleaning system before you attempt to start your cleaning system. If you have any problems operating your cleaning system, please call the pressurewasher helpUne at 1-800-222-3136.
If using another chemical designed foruse with pressure washers, prepare the chemical solution as required by the chemical manufacturer. Fill chemical reservoir(s) with the prepared solution as needed. Rotate the Dial-A-Cleaner TM selector knob to the letter correspondingto the desired reservoir.
BEFORE STARTING THE CLEANING SYSTEM To operate the engine youwill needto do the following: Add Engine Oil only use high quality detergent oil rated with API service classificationSF or SG.
• Move Run/Stop switch to the "Run" position. • Press the primerbulb three (3) times, waiting two (2) seconds between each push. • Grasp starter handle and pull slowly untilyou feel some resistance. Then pull cord rapidly to overcome compression, prevent kickbackand start the engine.
CUSTOMER RESPONSIBILITIES MAINTENANCE TASK Cleaning System CheckJclean water inlet screen on quick-connect. Ched,( high pressure ho6e. Check detergent ho_e. Check spray gun and assembly for leaks. Purge pump of _dr and contaminants. ENGINE Check oil level.
BEFORE EACH USE Check water inlet screen fordamage. • Check high pressure hose for leaks. Check chemical tanks and fillers for damage. • Check gun and wand assembly for leaks. • Purge pump of air and contaminants. • Check engine oil level. CLEANING SYSTEM MAINTENANCE Check and Clean Inlet Screen Examine garden hose inlet screen.
O-Ring Maintenance Through the normal operation of your cleaning system, the o-rings keep the connectionsof the hoses and gun tight and leak-free. They may become worn or damaged with use. Provided with your cleaning system is an o-ring Maintenance Kit containing replacement o-rings, a rubber washer and a garden hose inlet screen.
Service Air Cleaner Your engine will not run properly and may be damaged ff you runit using a dirty air cleaner. Clean or replace the air cleaner paper filler once every 50 hours of operation or once a year, whichever comes first. Clean or replace more often if operating under dusty or dirty conditions.
Clean / Replace Spark Plug Replace the spark plug yearly or every 100 hours of operation, whichever comes first. CAUTION: Disconnect spark plug wire from ,_ spark plug and keep wire away spark plug. from Clean area around spark plug. • Remove spark plug form the cylinder head.
• Reattach the valve cover making sure the gasket between the valve cover and cylinder head is in place. Start all four screws before tightening or you will not be able to get all the screws in place. • Reattach the breather tube. • Reattach the spark plug wire to the spark plug.
AFTER EACH USE Water should not remain in the unit for long periods of time. Sediments of minerals can deposit on pump parts and "freeze" pump action. Follow these procedures after every use: • Flush the chemical system by selecting the System Rinse tank and run the cleaning system with nozzle in low pressure mode.
1. PROBLEM Pump has followingproblems: failure to produce pressure, or erratic pressure, chattering,loss of pressure, low water volume. Detergent fails to mix. CAUSE Nozzle in lowpressure mode. 2. Water inlet is blocked. 3. Inadequate water supply 4. 5.
18.
Generac Power Systems GN 220, 7.8HP, Model # EHC 04048-0 8 9 I0 17 5 14 1 2 ou_K GR_. 2 1 2O Item B_c!__ Otv 7 78653 1 8 85272 1 9 84195 1 10 85620 11 00285271 12 84329 13 00185271 14 22097 15 82981 1.
Generac Power Systems GN 220, 7.8HP, Model # EHC 04048-0 36 7 28 46 17 33 1 78621 1 2 76389 1 3 88411 1 4 A8897A 1 5 77168 5 6 88057 1 7 76390 2 8 83337A 1 9 78658 1 10 78659 1 11 89213J 1 12 A7637 1 .
Generac Power Systems GN 220, 7.8HP, Model # EHC 04048-0 40 41 47 / 48 / Item _ ow 31 90947 1 32 90051 1 33 57058 1 34 80318 1 35 80316 2 36 20136 1 37 22097 2 38 49813 2 39 21202 1 40 36935 41 80303 .
Generac Power Systems GN 220, 7.8HP, Model # EHC 04048-0 1 I 2--1 3 4 .era P_a[t__ otv _]atLoJz 1 94820 1 Expansion Plug 2 91848 1 Oil Filter Gasket 3 84982 1 Oil Filter Adapter 4 92978 2 M6 x 20mm Screw 5 99236 1 Oil Pressure Switch 6 70185 1 Oil Filter 9O lt.
Generac Power Systems GN 220, 7.8HP, Model # EHC 04048-0 59 Rein Pa_# 55 83512 57 95213 58 77395 59 95214 60 30340 61 48031C 2 M6 x 15 Taptite 1 Tank Bracket 2 M6 Flange Nut 1 Tank Cradle 12" 1/4.
Craftsman 3000 PSi Cleaning System 580.768050 Pump 31 30 4 3 25 1_6 I 2O 9 10 14 16 18 19 37 4° 9 36 24.
Craftsman 3000 PSI Cleaning System 580.768050 Pump _ern 1 B2218 2 B2260 3 94738 4 93887 5 96400 3 6 99735 1 7 93652 1 8 93876 1 9 Order B2480 3 16 Order B2480 3 11 Order B4123 3 12 Order 134123 3 13 97027 3 14 96137 1 15 95138 1 16 B2665 6 17 93874 6 18 B3769 1 19 46580 3 20 95320 1 21 93644 1 22 B2668 1 Rein P_a[L 1 O-RING, 1.
Craftsman 3000 PSI Cleaning System 580.768050 Main Unit 26.
Craftsman 3000 PSI Cleaning System 580.768050 Main Unit Ilern _ _ _ 1I._31 ._!!!_! 2 B3608A 1 LINK, Throttle Control 51 42909 3 30809 4 GROMMET, Rubber 52 40976 4 B3576 1 DECAL, Control Panel 1210 53 89476 5 B3599 4 ASSY.
CALIFORNIA AND FEDERAL EMISSION CONTROL WARRANTY STATEMENT Your Warranty Rights and Obligations The Califomia Air Resources Board (CARB), United States Environmental Protection Agency (EPA), and Sears Roebuck and Co.
Warranty Period Any warranted part which is not scheduled for replacement as required maintenance shall be warranted for 2 years. Any warranted part which is scheduled only for regular inspection and/or has instructions to the effect of =repair or replace as necessary _ shall also be warranted for 2 years.
For in-home major brand repair service: Call 24 hours a day, 7 days a week 1-800-4-MY-HOME" (1-800-469-4663) Para pedir servicio de reparaci6n a domicilio- t-800-676-5811 In Canada for all your s.
An important point after buying a device Sears 580.768050 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sears 580.768050 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sears 580.768050 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sears 580.768050 you will learn all the available features of the product, as well as information on its operation. The information that you get Sears 580.768050 will certainly help you make a decision on the purchase.
If you already are a holder of Sears 580.768050, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sears 580.768050.
However, one of the most important roles played by the user manual is to help in solving problems with Sears 580.768050. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sears 580.768050 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
