Instruction/ maintenance manual of the product 47002 Sears
Go to page of 12
OWNER’S MANU AL Model No. 47002 Sears Canada Inc., 222 Jar vis St., T oronto, Ontario, Canada M5B 2B8 6/2 AMP MANU AL BA TTER Y CHARGER CAUTION: Read and Follo w All Safety Rules and Operating Instructions Before Every Use of this Product.
1 Sears 002 - Sch 548 11/2/95 T able Of Contents W arranty .................................................................. 1 Important Safety Instructions ................................. 2 P arts ..................................................
2 Sears 002 - Sch 548 11/2/95 – SAVE THESE INSTRUCTIONS – w • Read all instructions and cautions printed on the battery charger, battery, and vehicle or equipment using battery. • Use charger only on lead-acid type recharge- able batteries, such as those used in cars, trucks, trac-tors, airplanes, vans, RV’s, trolling motors, etc.
3 Sears 002 - Sch 548 11/2/95 Pa r t s This section shows an illustration of your battery charger. Use it to become familiar with where all the parts are located, and what they look like.
4 Sears 002 - Sch 548 11/2/95 A TEMPORARY adapter may be used to connect the charger to a two-pole outlet if a properly grounded outlet is not available. Use the adapter ONLY until a properly grounded outlet can be installed by a qualified electrician.
5 Sears 002 - Sch 548 11/2/95 P reparing your battery to be charged It is important that you read and follow these guidelines while you are preparing to charge your battery. • Make sure that you have a 12 volt lead-acid battery. • Clean the battery terminals.
6 Sears 002 - Sch 548 11/2/95 Charging Y our Battery Charging a battery in the vehicle: 1. Arrange the power cord and charging leads carefully to avoid damage that could be caused by the hood, door, or moving engine parts. 2. Keep clear of fan blades, belts, pulleys, and other parts that can cause injury.
7 Sears 002 - Sch 548 11/2/95 BATTERY POSITIVE NEGATIVE 24", 6 GAUGE CABLE POWER CORD TO GROUNDED POWER OUTLET +- BATTERY CHARGER 8. When the battery is fully charged, the AMMETER pointer will fall to about half the charge rate selected. For specific positions, refer to the “Ammeter” section in “Using your battery charger” on page 6.
8 Sears 002 - Sch 548 11/2/95 2 AMP 2 - 4 4 - 10 11 - 14 14 - 18 18 - 35 18 27 30 33 Calculating charge time Calculating charge time Calculating charge time Calculating charge time Calculating charge .
9 Sears 002 - Sch 548 11/2/95 A minimal amount of care can keep your battery charger working properly for years. 1. Clean the clamps each time you are finished charging. Wipe off any battery fluid that may have come in contact with the clamps to prevent corrosion.
10 Sears 002 - Sch 548 11/2/95 Circuit breaker in charger cycles on and off with a clicking sound. Ammeter reads less than selected charge rate when charging. Charger makes a loud buzz or hum. Extension cord too long or wire gauge to small. Battery has weak cell or sulfated plate.
When requesting service or ordering parts, always provide the following information: • Product T ype • Model Number • Part Number • Part Description Model No. 200.47002 0000000548-1 195 F or information about troubleshooting Call toll-free from anywhere in the U.
An important point after buying a device Sears 47002 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sears 47002 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sears 47002 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sears 47002 you will learn all the available features of the product, as well as information on its operation. The information that you get Sears 47002 will certainly help you make a decision on the purchase.
If you already are a holder of Sears 47002, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sears 47002.
However, one of the most important roles played by the user manual is to help in solving problems with Sears 47002. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sears 47002 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
