Instruction/ maintenance manual of the product 28.7123 Sears
Go to page of 18
Model No. 28.71230 00-99-001012/0510 Read and follow all Safety Rules and Operating Instructions before Every Use of this Product. SA VE THESE INSTRUCTIONS.
.
T ABLE OF CONTENTS SECTION P AGE IMPORT ANT SAFETY INSTRUCTIONS 2 PERSONAL PRECAUTIONS 3 PREP ARING TO CHARGE 3 CHARGER LOCA TION 4 DC CONNECTION PRECAUTIONS 4 FOLLOW THESE STEPS WHEN BA TTERY IS INST.
• 1 • IMPORT ANT : READ AND SA VE THIS SAFETY AND INSTRUCTION MANUAL. SA VE THESE INSTRUCTIONS – The 71230 offers a wide range of features to accommodate your needs.
• 2 • IM POR T A NT SA FET Y I NSTRU CTI ONS - SAVE TH ESE I NSTRU CTI ONS - 1. This manual contains important safety and operating instructions RISK OF ELECTRIC SHOCK OR FIRE. Keep out of reach of children. 1.1 Do not expose the charger to rain or snow .
• 3 • PERSO NA L PRECAUTI ONS 2. RISK OF EXPLOSIVE GASES. NEVER smoke or allow a spark or ame in the vicinity of a battery or engine. 2.1 Remove personal metal items such as rings, bracelets, necklaces and watches 2.2 when working with a lead-acid battery .
• 4 • Add distilled water to each cell until the battery acid reaches the level specied 3.4 by the battery manufacturer . Do not overll. For a battery without removable cell caps, such as valve regulated lead acid batteries (VRLA), carefully follow the manufacturer ’s recharging instructions.
• 5 • FOLLOW TH ESE ST EPS W HEN BA T TERY I S INS T A LLED I N VE HI CLE 6. A SP ARK NEAR THE BA TTERY MA Y CAUSE A BA TTER Y EXPLOSION. TO REDUCE THE RISK OF A SP ARK NEAR THE BA TTERY : NEGA TIVE GROUNDED SYSTEM Position the AC and DC cables to reduce the risk of damage by the hood, door 6.
• 6 • FOLLOW TH ESE ST EPS W HEN BA T TERY I S OUTS ID E VE HI CLE 7 . A SP ARK NEAR THE BA TTERY MA Y CAUSE A BA TTER Y EXPLOSION. TO REDUCE THE RISK OF A SP ARK NEAR THE BA TTERY : Check the polarity of the battery posts. The POSITIVE (POS, P , +) battery post 7.
• 7 • GRO UND ING A ND AC POW ER CO RD CO NNEC TIO NS 8. RISK OF ELECTRIC SHOCK OR FIRE. This battery charger is for use on a nominal 120-volt 8.1 circuit and has a grounded plug that looks like the plug illustrated. The charger must be grounded to reduce the risk of electric shock.
• 8 • Attach the Foot: 9.2 Remove the charger from the packing materials and place upside down on a at surface. Attach the foot and secure it with the four ¼-20 thread cutting screws provided. Assemble the Wheels and Axle 9.3 : Hold the axle upright on the oor or work surface.
• 9 • Mount the Axle to the Charger 9.4 : Place one end of each bracket into the slot on the bottom of the charger . Place the axle assembly under each bracket. Attach the brackets using the two, 10-32 thread cutting screws provided. NOTE: Be careful not to drop the brackets inside of the charger case.
• 10 • FEA TUR ES/CON TROL P ANE L 1 0. 2 1 3 Output 1. Selector Switch #1 Output 2. Selector Switch #2 Ammeter 3. Setting the Controls All controls for your charger are located on the front of the unit. Follow these instructions to obtain the accurate charge level for your battery .
• 1 1 • OPE R A TING I NST RUCTI ON S 1 1. This battery charger must be properly assembled in accordance with the assembly instructions before it is used. Charging Ensure that all of the charger components are in place and in good working 1. condition, for example, the plastic boots on the battery clips.
• 12 • After the engine starts, move Output Selector Switch #2 to the OFF position 7. and unplug the A.C. power cord before disconnecting the battery clips from the vehicle.
• 13 • MOV ING A ND STO R AGE IN STRUC TIO NS 1 4. Store the charger unplugged, in an upright position. The cord will still conduct 14.1 electricity until it is unplugged from the outlet. Store inside, in a cool, dry place. 14.2 Do not store the clips on the handle, clipped together , on or around metal, or 14.
• 14 • PROBLEM POSSIBLE CAUSE REASON/SOLUTION The charger is making an audible clicking sound. Circuit breaker is cycling. Battery is defective. Shorted battery cables or clips. Severely discharged battery , but otherwise it is a good battery . Reverse connections at battery .
• 15 • PROBLEM POSSIBLE CAUSE REASON/SOLUTION Charger will not turn on when properly connected. AC outlet is dead. Poor electrical connection. Check for open fuse or circuit breaker supplying AC outlet. Check power cord and extension cord for loose tting plug.
An important point after buying a device Sears 28.7123 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sears 28.7123 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sears 28.7123 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sears 28.7123 you will learn all the available features of the product, as well as information on its operation. The information that you get Sears 28.7123 will certainly help you make a decision on the purchase.
If you already are a holder of Sears 28.7123, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sears 28.7123.
However, one of the most important roles played by the user manual is to help in solving problems with Sears 28.7123. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sears 28.7123 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
