Instruction/ maintenance manual of the product 26462_0 Sears
Go to page of 22
SF./_S OWNERS MANUAL Model No. 26462_0 CRAFTSMAN o PROFESSIONAL MID-SIZED ROUTER TABLE WARNING: Before operating product, read this manual and follow all its Safety and Operating Instructions. Sears, Roebuck and Co., Hoffman Estates IL 60179 USA 26462 12/00 Printed in U.
General Safety Instructions for Power Tools ................................................ 3 Additional Safety Instructions for Router Tables ......................................... 4 Introduction ........................................ . .......
SAFETY GUIDELINES- DEFINITIONS This manual contains informa- tion that is important for you to know and understand. This information relates to protect- ing YOUR SAFETY and PREVENTING EQUIPMENT PROBLEMS. To help you rec- ognize this information, we use the symbols to the right.
18. Use recommended accessories Consult the owner's manual for recommended accessories and follow the instructions. The use of improper accessories may cause hazards. 19. Never stand on tool Serious injury could occur if the tool is tipped or if the cutting tool is accidentally contacted.
switch box when turning the router ONor OFF. DO NOT touch anything but the switch box when doing this. NEVER reach under the router table for anyrea- son when therouter is running, except to turn it OFF.
TOOLS REQUIRED • Phillips screwdriver. ° Small or medium sized adjustable wrench (or a set of nutdrivers). ° Electrical with 5/32" drill bit. • Hammer ROUTER TABLE 1. Position the router table top (Part No. 29LCN-981) as shown in Figure 1, with the bottom of the table top facing toward you.
FIGURE 5 FIGURE 7 Front of--. Router Table #10-32 Hex "Keps"_ Nut, (Typical)_ -_,- _ / Router _ _ ,_/ / Table _,_ _ --///_ / Leg Switch_ "_ #10-32 518" Long Truss Head Machin Screw, (Typical) MOUNTING ROUTER TO THE ROUTER TABLE I WARNINGI ALWAYS UNPLUG ROUTER BEFORE MOUNTING.
Other Brands of Routers It will be necessary for you to purchase a Craftsman Professional Router Adapter Plate, #25333, from your local Sears Retail Outlet, or through the Sears Catalogue. Routers with a total overall height of 13 inches or less, and a base diameter of 7 inches or less can be accommodated.
4. Repeat steps 1 through 3 for the other side of the fence. 5. Make sure the adjustable jointing fence is inside the router table fence as far as it will go and that the clamping knob has been securely tightened. FIGURE 14 Fence Clamping Knob 114-20 x 1-3/4",ong II Round Head _.
I _'WARNINGI The vibrations from operating the router can, from time to time, cause the hex nut and the clamp plate to become loose on the clamp rod. PERIODICALLY CHECK THESE FASTENERS AND ALL FASTENERS to ensure that they are tight and secure. PUSH BLOCK ASSEMBLY TO THE ROUTER TABLE FENCE 1.
surface before use. Failure to do so could cause the router table to tip over or slide, resulting in property damage and/or serious personal injury. 1.
GENERAL The power switch box is designed to be used with most Craftsman router tables. It provides the conven- ience of an "ON-OFF" switch box at the front of the table, thus eliminating the need to reach underneath the table to turn the router "ON" and "OFF".
The switch box incorporates two positive features to prevent inadvertent switching on of the router and the unauthorized, and possibly hazardous, use by others. Inadvertent switching on of the router is prevented by the clear plastic switch box cover.
USING THE ROUTER TABLE The fence on your router table is provided as a guide to hold the work piece for accuracy in routing. I_I_WARNING] BEFORE each and every use, make sure the router table is SECURE on a work- bench and DOES NOT MOVE. ALIGNMENT OF UNITIZED FENCE TO MITER BAR SLOT 1.
section ADJUSTING DEPTH AND HEIGHT OFTHE CUT. Tightly secure the fence assembly and the router as described before. (MAKE SURE ROUTER IS UNPLUGGED WHEN MAKING ADJUSTMENTS.) 3. LOWER THE OVERHEAD GUARD to the operating position. (Overhead guard shown raised for reasons of clarity.
FIGURE 29 Fence Clamping Knob Fence Clamping Knob Fence.,. Clamping_ Knob', _crap Nood Adjustabk Jointing Fence flush with Router Table ' Piloted Router Bit Fence Overhead guard shown raised for reasons of clarity.
Cutting Tenons 1. Make certain that the adjustable fence is locked in position with its face flush with the front face of the fence. 2. Mount the push block assembly on the fence, as described in the section PUSH BLOCK ASSEMBLY TO THE ROUTER TABLE UNITIZED FENCE.
I I When cutting tenons, always clamp I NOTE the work piece with the end to be cut resting flat on the table top. This will minimize steps in the finished tenon surface due to variations in the table top flatness. See FIGURE 36 k Piece ////_ _" Previous cuts Figure 37.
PARTS LIST FOR CRAFTSMAN PROFESSIONAL MID-SIZED ROUTER TABLE MODEL NO. 26462 @ @ @ @ @@@ @ @ @@ @@@ @ @@ KEY! 1 2 '3 4 5 6 7 .-. 8 9 10 "-11 - "12 "13 _14 15 _16 17 _'- 18 _19 -"'- 20 PART NO.
TABLE ASSEMBLY FENCE ASSEMBLY U MISCELLANEOUS PARTS 2O.
MITER BAR ASSEMBLY @ PUSH BLOCK ASSEMBLY SWITCH ASSEMBLY 21.
When corresponding, always give the following information as shown in the list: Printed in U.S.A. 12/00 49LCN-84 1. The PART NUMBER 2. The PART DESCRIPTION 3.
An important point after buying a device Sears 26462_0 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sears 26462_0 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sears 26462_0 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sears 26462_0 you will learn all the available features of the product, as well as information on its operation. The information that you get Sears 26462_0 will certainly help you make a decision on the purchase.
If you already are a holder of Sears 26462_0, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sears 26462_0.
However, one of the most important roles played by the user manual is to help in solving problems with Sears 26462_0. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sears 26462_0 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
