Instruction/ maintenance manual of the product 2500 Sears
Go to page of 13
Kenmore 2500 15 GALLON CENTRAL HUMIDIFIER Installation Maintenance Repair Parts Troubleshooting Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
contents WARRANTY ........................................... 2 BEFORE YOU START Rules for Safe Installation and Operation ................................... 2 Tools and Materials Needed .................. 2 UNDERSTANDING HUMIDITY .............. 3 SELECTING A LOCATION .
THANK YOU! .... Thank you for selecting a Sears Humidifier. It will provide years of sarvlca ff you give it a little care. UNDERSTANDING HUMIDITY Humidity can be puzzling. It cannot be seen, heard, touched, smelled or tasted. Many peopledo not understand what a humidi- fier will or will not do.
selecting a location Consider these points as you choose the location for your hu- midifier. Locate humidifier on supply air plenum (Fig. 1) or return air plenum. If the humidifier is installed on the return air plenum, the flexiblehose, round opening, is connected to the supply air plenum.
lltqm ! Electric Disconnect [] B Install motor bracket on left side. Make sure bracket is firmly seated (Fig. 6). Media Wheel k._ Small Diameter Wire Support. Large _ Position Media Diameter Wheel Shaft Wire Under Dimples Support By Flexing Outward. [] C Remove media wheel wire supports from reservoir.
[] 8 Attach collar and flexiblehose to plenum. If additional flexiblehose is required, an eight foot lengthis availablethrough the partsdepartment, order281152-05. Before tightening screws, insert damper between collar and plenum (Fig. 10). It should be open for humidifier operation.
[] 7 Unwind the rest of the tubing. Take care not to kink it. Run the tubing along flat surfaces to the humidifier. Support the tubing as needed to avoid contact with furnace. II[l_lill [] 8 Close previously opened faucet. Turn on main water supply. Place a pall under the and of the tubing.
installation HUMIDISTAT The humidistat is designed to _ount on the cold air plenum of your furnace or on an interiorwall of the home. The cold air ple- num, however is the preferred location for sensingthe average humidity throughout your home. Select your location and follow the appropriate instructions.
Mounting, Screws (4) Hole In Wall Mounting Screws Wall Mount I-<--Spacers Control Unit NOTE: By turning knob to the test position humidifier should start. (Do not leave on test.) Ifthe installation is being made in the summer or when the humidity is high, turn knob to the test position and the humidifier should start.
Body Pin *Reveme button if it has not been used. Replace with new buttonif both sides are worn. SUMMER SHUT DOWN: Unplug transformer,close saddle valve, close bypass damper.
repair parts KENMORE "2500" CENTRAL HUMIDIFIER MODEL NO. 303.936613 I / / KEY PART KEY PART NO. NO. DESCRIPTION NO, NO. DESCRIPTION 1 21571501 2 35586401 3 05301101 4 21571601 5 STD575026 6.
Kenmore 303.93661 FURNACE HUMIDIFIER MAINTENANCE (APPLY THIS LABEL WHERE EASILY SEEN) Cleaning frequency is dependent upon mineral content of water supply. Check every other week until schedule can be determined. 1. Turn humidistat to "minimum setting.
Kenmore 2500 15 GALLON CENTRAL HUMIDIFIER For the repair or replacement parts you need Call 7:00 a.m. - 7:00 p.m., 7 days a week 1-800-366-PART (1-800-366-7278) @ For in-home major brand repair servic.
An important point after buying a device Sears 2500 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sears 2500 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sears 2500 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sears 2500 you will learn all the available features of the product, as well as information on its operation. The information that you get Sears 2500 will certainly help you make a decision on the purchase.
If you already are a holder of Sears 2500, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sears 2500.
However, one of the most important roles played by the user manual is to help in solving problems with Sears 2500. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sears 2500 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
