Instruction/ maintenance manual of the product 200.71488 Sears
Go to page of 11
OWNER'S MANUAL DieHard, Portable Power 1150 Jump Starter/DC Power Source Air Compressor, Inflator and AC Power Model No. 200.71488 CAUTION: Read all Safety Rules and Operating Instructions, and follow them with each use of this product. Sears, Roebuck and Co.
bIL*_ :] I :l[o) = [e[o] _ bll:l_ 11[-1 Warranty ........................................................................................................................ 2 Important Safety Instructions .................................................
hVAI ;[o] Z_I IV;1 _ | | _-"T;1 d =/15"d II _ [._ | zZi[o,) d [o] _ [.'] SAVE THESE INSTRUCTIONS CHARGE THE 1150 BEFORE THE FIRST USE AND AFTER EVERY USE THEREAFTER. USE IN A WELL-VENTILATED SPACE. CONTAINS SEALED NON-SPILLABLE LEAD-ACID BATTERY.
[.]_ _ ;l-'_lil _ [_ II_ [-<l i ;tl[.ti [.] _ E- "] WARNING: Failure to follow instructions may cause damage or an explosion. Read entire instruction manual before use. Always shield eyes during use and wear safety glasses. JUMP-STARTING A VEHICLE ENGINE Use in well-ventilated area.
To operate a 12V DC device: 1. Open the protective cover ofthe DC power outlet on the front panel of the Portable Power 1150. 2. Plug the 12V DC device into the DC power outlet, and turn on the 12V DC device (ifrequired). 3. If both 12V DC devices combined draw more than 30 amps, the fuse will 4.
1. Attach the corrugated hose with end adapter tothe high-flow inflator outlet located directly above the infla- torON / OFF switch on the back of the 1150.
USING THE INVERTER It is important to know the continuous wattage of the device you plan to use with the inverter. The Portable Power 1150 must be used with devices drawing 400 watts or less. If the wattage is not marked on the device, an estimate can be made by multiplying the AC input current (Amps) by the AC voltage (110V).
110V AC ELECTRICAL DEVICE EXAMPLE RUN-TIME CHART Appliance Type Estimated Wattage Estimated Time* Spotlights, Sump Pumps, DVD Players 100 Watts 1.5 Hours Faxes, TVs, Small Power Tools 150 Watts 1.25 Hours Computer Printer, Medium Power 200 Watts 55 Minutes Tools, Blenders The maximum continuous load is 400 watts.
4, Once the battery is fully charged, the built-in charger automatically switches to float-mode monitoring, which trickle charges the battery and keeps it fully charged without over- charging so the Portable Power 1150 may be left permanently connected to the wall outlet.
I,,"] _ _[_] Ii [.!':_ i [.]_ f,.'] Internal Battery Type Nominal Voltage Capacity DC Power Outlets (Max. Continuous Load) Built-in Light Bulb (Replaceable) Jumper Cables Dimensions (H X WX D) Product Weight Maintenance-free AGM Lead-acid 12v DC 22 Ah 15A per outlet 5w/12v DC (Base type BA9S) 4-gauge AWG, 24 Inches 12 H X 11.
CONTAINS SEALED NON-SPILLABLE LEAD-ACID BATTERY. MUST BE DISPOSED OF PROPERLY. WARNING: Possible explosion hazard. Contact with battery acid may cause severe burns and blindness.
An important point after buying a device Sears 200.71488 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sears 200.71488 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sears 200.71488 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sears 200.71488 you will learn all the available features of the product, as well as information on its operation. The information that you get Sears 200.71488 will certainly help you make a decision on the purchase.
If you already are a holder of Sears 200.71488, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sears 200.71488.
However, one of the most important roles played by the user manual is to help in solving problems with Sears 200.71488. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sears 200.71488 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
