Instruction/ maintenance manual of the product 200.7121 Sears
Go to page of 12
SE/ S OWNER'S MANUAL Model No. 200.71210 CAUTION: Read and Follow All Safety Rules and Operating Instructions Before Every Use of this Product. 10/2 AMP MANUAL BATTERY CHARGER Sears, Roebuck and Co.
Table Of Contents Wa rra nty .................................................................. 1 Important Safety Instructions .................................. 2 Parts ......................................................................... 3 Before Using Your Battery Charger .
Important Safety Instructions - SAVE THESE INSTRUCTIONS - • Read ell instructions and cautions printed on the battery charger, battery, end vehicle or equipment using battery. • Use charger only on lead-acid type rechargeable batteries, such as those used in cars, trucks, trac- tors, airplanes, vans, RV's, trolling motors, etc.
Parts This section shows an illustration of your battery charger. Use it to become familiar with where all the parts are located, and what they look like.
Before Using Your Battery Charger It is important to understand your charger's requirements. This section will tell you about your charger's electrical requirements and how to prepare a battery for charging. Plugging it in Your charger should be grounded to reduce the risk of electrical shock.
Preparing your battery to be charged It is important that you read and follow these guidelines while you are preparing to charge your battery. • Make sure that you have a 12 volt lead-acid battery. • Clean the battery terminals. Be careful to keep corrosion from getting in or around your eyes.
Using Your Battery Charger For best results from your battery charger, learn to use it properly. This section tells how to set the controls and how to charge a battery in or out of the vehicle. Setting the Controls SELECTOR SWITCHES: A 2-way switch is used to select the 2-AMP or the 10-AM P charge rate.
6. Connect the clamp to the battery post and twist or rock back and forth to make a solid connection. This will help keep the clamps from slipping offthe posts and causing sparks. 7. Select the charge rate with the Selector Switch then plug the power cord into a grounded AC outlet to begin charging.
Calculating charge time The Chart Method Use the following table to more accurately determine the time it will take to bring a battery to full charge. First, identity where your battery fits into the chart. • Small batteries motorcycles, garden tractors, etc.
Maintenance and care A minimal amount of care can keep your battery charger working properly for years. 1. Clean the clamps each time you are finished charging. Wipe off any battery fluid that may have come in contact with the clamps to prevent corrosion.
Troubleshooting Performance problems often result from little things that you can fix yourself. Please read through this chart for a )ossible solution if a problem occurs. PROBLEM No ammeter reading, Circuit breaker in charger cycles on and off with e clicking sound.
SEARS OWNER'S MANUAL Model No. 200.71210 When requesting service or ordering parts, always provide the following information: • Product Type • Model Number • Part Number • Part Description 0000000509-895 10/2 AMP MANUAL BATTERY CHARGER Forinformation about troubleshooting Call toll-free from anywhere in the U.
An important point after buying a device Sears 200.7121 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sears 200.7121 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sears 200.7121 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sears 200.7121 you will learn all the available features of the product, as well as information on its operation. The information that you get Sears 200.7121 will certainly help you make a decision on the purchase.
If you already are a holder of Sears 200.7121, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sears 200.7121.
However, one of the most important roles played by the user manual is to help in solving problems with Sears 200.7121. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sears 200.7121 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
