Instruction/ maintenance manual of the product 200.71206 Sears
Go to page of 16
SAFETY 1 PARTS MAINTENANCE TROUBLESHOOTING OPERATION 0000000508-1196 OWNER’S MANUAL 6/2 AMP MANUAL BATTERY CHARGER Model No. 200.71206 CAUTION: Read and Follow All Safety Rules and Operating Instructions Before Every Use of this Product. Sears, Roebuck and Co.
2 TROUBLESHOOTING MAINTENANCE PARTS OPERATION SAFETY TABLE OF CONTENTS WARRAN WARRAN WARRAN WARRAN WARRAN T T T T T Y Y Y Y Y Warranty ...................................................................................................... 2 Important Safety Instructions .
SAFETY 3 PARTS MAINTENANCE TROUBLESHOOTING OPERATION IMPORTANT SAFETY INSTRUCTIONS • Read all instructions and cautions printed on the battery charger, battery, and vehicle or equipment using battery.
4 TROUBLESHOOTING MAINTENANCE PARTS OPERATION SAFETY For your own personal safety, please follow the following precautions: Wear complete eye and clothing protection when working with lead- acid batteries. Be sure that someone is within range of your voice to come to your aid if needed while you work with or are near a lead-acid battery.
SAFETY 5 PARTS MAINTENANCE TROUBLESHOOTING OPERATION BE FO R E USING YOUR BA T TER Y C HAR GER It is important to prepare your charger for use. This section will tell you about your charger's electrical requirements and how to prepare a battery for charging.
6 TROUBLESHOOTING MAINTENANCE PARTS OPERATION SAFETY PREPARING YOUR BATTERY TO BE CHARGED It is important that you read and follow these guidelines while you are preparing to charge your battery. • Make sure that you have a 12 volt lead-acid battery.
SAFETY 7 PARTS MAINTENANCE TROUBLESHOOTING OPERATION When using the ENGINE START feature, the needle will swing into the Start (red) area of the scale while you are cranking the engine. The percent of charge scale is intended as a visual aid to help simplify reading the state of charge of the battery.
8 TROUBLESHOOTING MAINTENANCE PARTS OPERATION SAFETY Charging your battery outside the vehicle: POSITIVE NEGATIVE BATTERY CHARGER POWER CORD BATTERY + - TO GROUNDED POWER OUTLET Figure B (NEGATIVE) lead of the charger to the free end of the cable. Rock the clamp to make a solid connection.
SAFETY 9 PARTS MAINTENANCE TROUBLESHOOTING OPERATION CALCULATING CHARGE TIME The Chart Method Use the following table to more accu- rately determine the time it will take to bring a battery to full charge. First, identify where your battery fits into the chart.
10 TROUBLESHOOTING MAINTENANCE PARTS OPERATION SAFETY (A battery at 50 percent charge that will be charged to 100 percent needs another 50 percent (.50). • Multiply the Amp Hour rating by the charge needed (.50) and divide by the charger setting (2 or 6 amps).
SAFETY 11 PARTS MAINTENANCE TROUBLESHOOTING OPERATION MAINTENANCE AND CARE A minimal amount of care can keep your battery charger working properly for years. 1. Clean the clamps each time you are finished charging. Wipe off any battery fluid that may have come in contact with the clamps to prevent corrosion.
12 TROUBLESHOOTING MAINTENANCE PARTS OPERATION SAFETY TROUBLESHOOTING Performance problems often result from little things that you can fix yourself. Please read through this chart for a possible solution if a problem occurs. PROBLEM POSSIBLE CAUSE SOLUTION/REASONS No ammeter reading.
SAFETY 13 PARTS MAINTENANCE TROUBLESHOOTING OPERATION Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Replacement Parts List Sears 71206 Description Part Number Cover 3799001402 Heatsink/Diode Assembly 22990.
14 TROUBLESHOOTING MAINTENANCE PARTS OPERATION SAFETY WIRING DIAGRAM.
SAFETY 15 PARTS MAINTENANCE TROUBLESHOOTING OPERATION NOTES.
16 TROUBLESHOOTING MAINTENANCE PARTS OPERATION SAFETY For the repair or replacement parts you need Call 7 am - 7 pm, 7 days a week 1-800-366-PART (1-800-366-7278) For the location of a Sears Repair Se.
An important point after buying a device Sears 200.71206 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sears 200.71206 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sears 200.71206 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sears 200.71206 you will learn all the available features of the product, as well as information on its operation. The information that you get Sears 200.71206 will certainly help you make a decision on the purchase.
If you already are a holder of Sears 200.71206, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sears 200.71206.
However, one of the most important roles played by the user manual is to help in solving problems with Sears 200.71206. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sears 200.71206 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
